关于ns2添加mudp

今天系统重装，所有得都要重来，上回自己都忘了怎么把mudp那些给弄进去得，找到当初得那个示范网页，一步一步来，发现老是在make clean；make那出问题，郁闷。想了半天，发现那大哥得教程(准备写一个NS2 step by step，NS2 by Step (2)  )写得不对，下面把柯老师得教程补充详细了贴上来，以防自己再忘记，如果有童鞋能看到，也不错

1.      Downloadmudp.cc,mudp.h,mudpsink.cc, and mudpsink.h（我这不带链接）

2.      Create a folder named measure under ns. (for example, ~/ns-allinone-2.28/ns-2.28/measure)（就放在这个路径吧，其他我没有试过）

3.      Put these four files into measure folder.

4.      add sendtime_, pkt_id_ into packet common header. (modify common/packet.h)

struct hdr_cmn {

        enum dir_t { DOWN= -1, NONE= 0, UP= 1 };

        packet_t ptype_;      // packet type (see above)

        int     size_;                // simulated packet size

        int     uid_;         // unique id

        int     error_;              // error flag

        int     errbitcnt_;     // # of corrupted bits jahn

        int     fecsize_;

        double      ts_;           // timestamp: for q-delay measurement

        int     iface_;              // receiving interface (label)

        dir_t direction_;        // direction: 0=none, 1=up, -1=down

       double  sendtime_;          ...

        unsigned long int pkt_id_;（添加得）

        ...

        inline int& addr_type() { return (addr_type_); }

        inline int& num_forwards() { return (num_forwards_); }

        inline int& opt_num_forwards() { return (opt_num_forwards_); }

        //monarch_end

       inline double& sendtime() { return (sendtime_); } // added by smallko（添加得）

   }

 

5.      Add the “measure/mudp.o measure/mudpsink.o “ in the OBJ_CC of Makefile.（路径：ns-allinone-2.2x/ns-2.2x,不是ns~/ns-allinone-2.2x/nam-1.1x/）

6.      Add “Agent/mUDP set packetSize_ 1000” in the ns-default.tcl. (ns-default.tcl is under ~/ns-allinone-2.28/ns-2.28/tcl/lib)

7.      make clean ; make(要在路径ns-allinone-2.2x/ns-2.2x下)

就是5和7把我折腾了很久