MPLS 虚拟专用网

一、MPLS VPN基本模型 

二、MPLS VPN分类

 三、MPLS L2VPN-VLL/VPWS

 

 

  四、MPLS L2VPN-VLL/VPWS跨域

 

  五、MPLS L2VPN-VLL/VPWS-FRR

 

   六、MPLS L2VPN-PWE3

 

七、MPLS L2VPN-PWE3-跨域

 

 

 八、MPLS L2VPN-VPLS

 

配置PW加入PW冗余保护组。

PE1:

vsi vsi1

 pwsignal ldp

 protect-group vsi1

 protect-mode pw-redundancy master/ master/ slave模式

 peer 2.2.2.2 preference 1         //master

 peer 3.3.3.3 preference 2         //slave

 reroute delay 60                        //延迟回切时间

配置BFD检测主PW

PE1:

bfd pl bind pw vsi vsi1 peer 2.2.2.2 remote peer 2.2.2.2 pw-ttl auto-calculate

discriminator local 102

discriminator remote 201

PE2:

bfd pl bind pw vsi vsi1 peer 1.1.1.1 remote peer 1.1.1.1 pw-ttl auto-calculate

discriminator local 201

discriminator remote 102

九、MPLS L2VPN-VPLS跨域

 十、MPLS L2VPN-VPWS接入 VPLS

 

  • 1
    点赞
  • 7
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
配置VPWS(Virtual Private Wire Service)需要以下步骤: 1. 配置伪线路协议(pseudowire protocol) 首先,需要配置伪线路协议来确定如何封装以太网帧。在思科2800上,可以选择使用L2TPv3(Layer 2 Tunneling Protocol version 3)或者MPLS(Multiprotocol Label Switching)协议。 例如,如果选择使用L2TPv3协议,可以按照以下命令配置: ``` interface pseudowire <pseudowire-id> encapsulation l2tpv3 protocol none ip local interface <local-interface> ip pmtu ``` 其中,<pseudowire-id>是伪线路的编号,<local-interface>是本地接口的名称。 2. 配置伪线路的远程端点 接下来,需要配置伪线路的远程端点。可以使用以下命令: ``` pseudowire-class <class-name> encapsulation l2tpv3 protocol none ip local interface <local-interface> ip pmtu ``` 其中,<class-name>是伪线路的类别名称,<local-interface>是本地接口的名称。 3. 配置伪线路的服务实例 接下来,需要配置伪线路的服务实例。可以使用以下命令: ``` xconnect <remote-ip-address> <vc-id> encapsulation mpls ``` 其中,<remote-ip-address>是远程端点的IP地址,<vc-id>是虚拟电路的编号。 4. 配置访问列表 最后,需要配置访问列表(access list)来限制哪些流量可以通过伪线路传输。可以使用以下命令: ``` access-list <access-list-number> permit <protocol> <source-ip-address> <destination-ip-address> ``` 其中,<access-list-number>是访问列表的编号,<protocol>是协议类型,<source-ip-address>和<destination-ip-address>分别是源IP地址和目的IP地址。 以上就是在思科2800上配置VPWS的步骤。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值