在一个新的项目中，在拿到板之前，如果有固件，则获取到相关的配置，并测试相关的外围看是否正常，根据原理图以及相关的资料进行相应的修改，调试相关的驱动等等。。。
一：wifi模块
在设置中的wifi模块，首先需要判断硬件是否存在故障；其次在配置文件中注意硬件的高低电平极其引脚；最后注意相关驱动的加载。
首先排除硬件，对于相关的配置下面已rtl8188etv为例：
1.在.config中需要配置如下选项，将wifi driver 编译为模块CONFIG_RTL8188EU = m
2.在BoardConfig.mk中
# 1. Wifi Configuration
BOARD_WIFI_VENDOR := realtek
#BOARD_WIFI_VENDOR := broadcom
# 1.1 realtek wifi support
ifeq ($(BOARD_WIFI_VENDOR), realtek)
WPA_SUPPLICANT_VERSION := VER_0_8_X
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl
# SW_BOARD_USR_WIFI := rtl8192cu
# BOARD_WLAN_DEVICE := rtl8192cu
SW_BOARD_USR_WIFI := rtl8188eu
BOARD_WLAN_DEVICE := rtl8188eu
3.在init.sun7i.rc中
# 1.1 realtek wifi sta service
service wpa_supplicant /system/bin/wpa_supplicant -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf -e/data/misc/wifi/entropy.bin
class main
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot
# 1.2 realtek wifi sta p2p concurrent service
service p2p_supplicant /system/bin/wpa_supplicant \
-ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf -e/data/misc/wifi/entropy.bin -N \
-iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf
class main
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot
[wifi_para]
wifi_used = 1
wifi_sdc_id = 3
wifi_usbc_id = 2
wifi_usbc_type = 1
wifi_mod_sel = 6
wifi_power = ""
二。耳机
关于耳机主要是由于时钟频率以及相关的配置，通常在sys_config.fex中进行
[audio_para]
audio_used = 1
audio_pa_ctrl = port:PH15<1><default><default><0>
audio_earphone_ctrl = port:PH15<1><default><default><0>
headphone_vol = 0x3f
三。修改桌面workspace以及AppsCustomize的单元大小
找到设备对应的桌面布局文件，比如我的1024*600像素的一般在values-sw600dp下
<!-- AppsCustomize -->
<dimen name="apps_customize_cell_width">96dp</dimen>
<dimen name="apps_customize_cell_height">96dp</dimen>
<dimen name="apps_customize_pageLayoutPaddingLeft">12dp</dimen>
<dimen name="apps_customize_pageLayoutPaddingRight">12dp</dimen>
<dimen name="apps_customize_tab_bar_height">60dp</dimen>
<dimen name="apps_customize_tab_bar_margin_top">8dp</dimen>
<dimen name="apps_customize_widget_cell_width_gap">20dp</dimen>
<dimen name="apps_customize_widget_cell_height_gap">24dp</dimen>
<dimen name="app_widget_preview_label_margin_top">8dp</dimen>
<dimen name="app_widget_preview_label_margin_left">@dimen/app_widget_preview_padding_left</dimen>
<dimen name="app_widget_preview_label_margin_right">@dimen/app_widget_preview_padding_right</dimen>
<!-- Workspace cell size -->
<dimen name="workspace_cell_width_land">88dp</dimen>
<dimen name="workspace_cell_width_port">96dp</dimen>
<dimen name="workspace_cell_height_land">88dp</dimen>
<dimen name="workspace_cell_height_port">96dp</dimen>
<dimen name="workspace_width_gap_land">80dp</dimen>
<dimen name="workspace_width_gap_port">2dp</dimen>
<dimen name="workspace_height_gap_land">2dp</dimen>
<dimen name="workspace_height_gap_port">70dp</dimen>
四：修改默认输入法
例如默认为google拼音
1、Z:\exdroid4.2-a20\android4.2\frameworks\base\packages\SettingsProvider\res\values\defaults.xml
中添加<string name="def_input_method">com.google.android.inputmethod.pinyin/.PinyinIME</string>
2、Z:\exdroid4.2-a20\android4.2\frameworks\base\packages\SettingsProvider\src\com\android\providers\settings\DatabaseHelper.java
在private void loadSecureSettings(SQLiteDatabase db) {
}
中加上
loadStringSetting( stmt, Settings.Secure.DEFAULT_INPUT_METHOD,R.string.def_input_method);
就可以了
或者是
在private void loadSecureSettings(SQLiteDatabase db)可以改为
//def input method
loadSetting(stmt, Settings.Secure.DEFAULT_INPUT_METHOD,
SystemProperties.get("def_input_method",
mContext.getResources().getString(R.string.def_input_method)));
可以实现在build.prop中配置输入，比如配置Google拼音，在build.prop中加入
def_input_method=com.android.inputmethod.pinyin/.PinyinIME
即可,这样处理可以方便使用输入法修改。
ps:在build.prop中加配置可在device配置中的mk文件(比如nuclear_xxx.mk）中处理
3.将该输入法的apk放置/system/app下，如果有lib则将其放入/system/lib/目录下
验证：
mmm ./frameworks/base/packages/SettingsProvider/ -j16
在/data/data/com.android.providers.settings/databases 下，sqlite3 settings.db 用select * from secure ;看见2|default_input_method|com.google.android.inputmethod.pinyin/.PinyinIME 即正确了
五。隐藏APK图标
在src/com/android/launcher2/AllAppsList.java的
public void add(ApplicationInfo info)
函数中修改如下（隐藏GoogleMap的导航图标为例)
|
1
2
3
4
5
6
7
8
9
10
11
|
if
(findActivity(data, info.componentName)) {
return
;
}
+
if
(info.componentName.getClassName() !=
null
+ && info.componentName.getClassName().equals(
"com.google.android.maps.driveabout.app.DestinationActivity"
)){
+
//Log.d("google.android.maps", "return before add " + info.componentName.getClassName());
+
return
;
+ }
data.add(info);
added.add(info);
}
|
ps:获取包名类名的方法
1.windows装好sdk环境。
2.打开命令行窗口，输入如下
appt dump badging test.apk
备注: test.apk参数可通过将apk文件拖入命令行窗口来免去输入
六：邮箱默认签名：
zfl@Exdroid:~/android4.2-a20/android/android4.2/packages/apps/Email/src/com/android/email/activity$ git diff MessageCompose.java
diff --git a/src/com/android/email/activity/MessageCompose.java b/src/com/android/email/activity/MessageCompose.java
index 0ac7301..d728117 100644
--- a/src/com/android/email/activity/MessageCompose.java
+++ b/src/com/android/email/activity/MessageCompose.java
@@ -2330,6 +2330,19 @@ public class MessageCompose extends Activity implements OnClickListener, OnFocus
* null or has no signature, {@code null} is returned.
*/
private static String getAccountSignature(Account account) {
- return (account == null) ? null : account.mSignature;
+// return (account == null) ? null : account.mSignature;
+// change by zfl
+ String sinature = "From SANEI N60" ;
+ if(account == null){
+ return sinature;
+ }
+ if(account.mSignature == null){
+ return sinature;
+ }
+ if(account.mSignature.isEmpty()){
+ account.mSignature = sinature ;
+ }
+ return account.mSignature;
+//end by zfl
}
}
七：去掉相机的全景模式：
单
diff --git a/src/com/android/camera/VideoController.java b/src/com/android/camera/VideoController.java
old mode 100644
new mode 100755
index d84c1ad..7b4f5e3
--- a/src/com/android/camera/VideoController.java
+++ b/src/com/android/camera/VideoController.java
@@ -75,7 +75,10 @@ public class VideoController extends PieController
}
}
});
- mRenderer.addItem(item);
+ int n = CameraHolder.instance().getNumberOfCameras();
+ if (n > 1) {
+ mRenderer.addItem(item);
+ }
mOtherKeys = new String[] {
CameraSettings.KEY_VIDEO_EFFECT,
CameraSettings.KEY_VIDEO_TIME_LAPSE_FRAME_INTERVAL,
双：
zfl@Exdroid:~/android4.2-a20/android/android4.2/packages/apps/Camera/src/com/android/camera$ git diff CameraActivity.java
diff --git a/src/com/android/camera/CameraActivity.java b/src/com/android/camera/CameraActivity.java
index ec2c2d2..c91dd54 100755
--- a/src/com/android/camera/CameraActivity.java
+++ b/src/com/android/camera/CameraActivity.java
@@ -85,7 +85,9 @@ public class CameraActivity extends ActivityBase
&& CameraHolder.instance().getFrontCameraId() == 0) {
DRAW_IDS = DRAW_IDS_WITHOUT_PAN;
} else {
- DRAW_IDS = DRAW_IDS_WITH_PAN;
+// DRAW_IDS = DRAW_IDS_WITH_PAN;
+//zfl
+ DRAW_IDS = DRAW_IDS_WITHOUT_PAN;
}
mDrawables = new Drawable[DRAW_IDS.length];
for (int i = 0; i < DRAW_IDS.length; i++) {
八。相机字体关闭打开显示不全：
zfl@Exdroid:~/android4.2-a20/android/android4.2/packages/apps/Camera$ git diff ./res/values/dimens.xml
diff --git a/res/values/dimens.xml b/res/values/dimens.xml
index cb38007..ce45209 100644
--- a/res/values/dimens.xml
+++ b/res/values/dimens.xml
@@ -23,7 +23,8 @@
<dimen name="setting_item_text_size">18sp</dimen>
<dimen name="setting_knob_width">20dp</dimen>
<dimen name="setting_knob_text_size">20dp</dimen>
- <dimen name="setting_item_text_width">95dp</dimen>
+<!-- zfl <dimen name="setting_item_text_width">95dp</dimen> -->
+ <dimen name="setting_item_text_width">115dp</dimen>
<dimen name="setting_popup_window_width">240dp</dimen>
<dimen name="setting_item_list_margin">14dp</dimen>
<dimen name="indicator_bar_width">48dp</dimen>
九。修改桌面布局：
实现办法
1) 下载 GetLayout.apk
2) adb push它们到平板电脑的/system/app中，然后后启平板电脑。
3) 在应用列表中点击GetLayout应用图标以开启该应用：
程序会自动运行，显示一个Toast提示成功生成“/data/data/com.xw.getlayout/files/home_layout.xml”的消息，然后程序自动退出。
将GetLayout.apk生成的home_layout.xml从平板电脑中抽取到本地：
adb pull /data/data/com.xw.getlayout/files/home_layout.xml ~/
4. 用上面克隆出来的home_layout.xml来编译Laucher2：
用home_layout.xml覆盖Launcher应用中所有的“default_workspace.xml”：
cp -rf ~/home_layout.xml packages/apps/Launcher2/res/xml/default_workspace.xml
cp -rf ~/home_layout.xml packages/apps/Launcher2/res/xml-sw480dp/default_workspace.xml
cp -rf ~/home_layout.xml packages/apps/Launcher2/res/xml-sw600dp/default_workspace.xml
cp -rf ~/home_layout.xml packages/apps/Launcher2/res/xml-sw720dp/default_workspace.xml
chmod 777 packages/apps/Launcher2/res/xml/default_workspace.xml
chmod 777 packages/apps/Launcher2/res/xml-sw480dp/default_workspace.xml
chmod 777 packages/apps/Launcher2/res/xml-sw600dp/default_workspace.xml
chmod 777 packages/apps/Launcher2/res/xml-sw720dp/default_workspace.xml
重新编译Laucher2:
mmm -B packages/apps/Launcher2 -j16
将新生成的Launcher2.apk安装到平板上：
adb push out/target/product/wing-k70/system/app/Launcher2.apk /system/app
十。修改系统内存
已1G为例：
1.在BoardConfig.mk文件中 设置BOARD_USERDATAIMAGE_PARTITION_SIZE := 1073741824
2.在sys_partion.fex中设置
;------------------------------>mmcblk0p8/nande
[partition]
name = data
size = 2097152
user_type = 0x2
十一。11.视频缩放模式默认全屏
zfl@Exdroid:~/android4.2-a20/android/android4.2/packages/apps/Gallery2$ git diff src/com/android/gallery3d/app/MovieViewControl.java
diff --git a/src/com/android/gallery3d/app/MovieViewControl.java b/src/com/android/gallery3d/app/MovieViewControl.java
index ea7087d..a01b9a0 100755
--- a/src/com/android/gallery3d/app/MovieViewControl.java
+++ b/src/com/android/gallery3d/app/MovieViewControl.java
@@ -1024,7 +1024,8 @@ VideoView.OnSubFocusItems{
mControlFocus = EDITOR_ZOOM;
mDialogTitle.setText(R.string.zoom_title);
- int currentMode = sp.getInt(EDITOR_ZOOM, 0);
+// int currentMode = sp.getInt(EDITOR_ZOOM, 0);
+ int currentMode = sp.getInt(EDITOR_ZOOM, 1); // zfl
int[] list = mRes.getIntArray(R.array.screen_zoom_values);
for(mListFocus = 0; mListFocus < list.length; mListFocus++) {
if(currentMode == list[mListFocus]) {
@@ -1144,7 +1145,8 @@ VideoView.OnSubFocusItems{
mVideoView.setSubPosition(offset);
/* zoom mode */
- int zoom = sp.getInt(EDITOR_ZOOM, 0);
+// int zoom = sp.getInt(EDITOR_ZOOM, 0);
+ int zoom = sp.getInt(EDITOR_ZOOM, 1); //zfl
mVideoView.setZoomMode(zoom);
十二。锁屏界面将向下的解锁换成向右的
zfl@Exdroid:~/android4.2-a20/android/android4.2/frameworks/base/core/res/res$ git diff values-sw600dp-land/arrays.xml
diff --git a/core/res/res/values-sw600dp-land/arrays.xml b/core/res/res/values-sw600dp-land/arrays.xml
index 5550216..2eabf66 100644
--- a/core/res/res/values-sw600dp-land/arrays.xml
+++ b/core/res/res/values-sw600dp-land/arrays.xml
@@ -22,35 +22,35 @@
<!-- Resources for GlowPadView in LockScreen -->
<array name="lockscreen_targets_when_silent">
<item>@drawable/ic_lockscreen_unlock</item>
- <item>@null</item>
+ <item>@drawable/ic_action_assist_generic</item>
<item>@drawable/ic_lockscreen_soundon</item>
<item>@null</item>
</array>
<array name="lockscreen_target_descriptions_when_silent">
<item>@string/description_target_unlock</item>
- <item>@null</item>
+ <item>@string/description_target_search</item>
<item>@string/description_target_soundon</item>
<item>@null</item>
</array>
<array name="lockscreen_direction_descriptions">
<item>@string/description_direction_right</item>
- <item>@null</item>
+ <item>@string/description_direction_up</item>
<item>@string/description_direction_left</item>
<item>@null</item>
</array>
<array name="lockscreen_targets_when_soundon">
<item>@drawable/ic_lockscreen_unlock</item>
- <item>@null</item>
+ <item>@drawable/ic_action_assist_generic</item>
<item>@drawable/ic_lockscreen_silent</item>
<item>@null</item>
</array>
<array name="lockscreen_target_descriptions_when_soundon">
<item>@string/description_target_unlock</item>
- <item>@null</item>
+ <item>@string/description_target_search</item>
<item>@string/description_target_silent</item>
<item>@null</item>
</array>十三：默认动态壁纸：
以蘑菇云为例，如下
十四：分区相关的东东
主要涉及到两个文件：sys_partition以及BoardConfig 相关修改见下图：
结果如下图：
十五：在build.prop中用属性值来默认动态壁纸
首先我们在build.prop文件中添加已属性值：修改pack_before.sh脚本添加两行,如下图：
其中红色的箭头就是动态壁纸相关的包名以及服务名
然后我们在/frameworks/base/services/java/com/android/server下的WallpaperManagerService.java 文件中作如下修改即可：
最后烧写固件
打印的Log日志如下：
十六：相机拍照存储中的“打开-关闭”显示不全
zfl@Exdroid:~/common_a20/android/packages/apps/Camera$ git diff res/values/dimens.xml
diff --git a/res/values/dimens.xml b/res/values/dimens.xml
old mode 100644
new mode 100755
index cb38007..ec1bacc
--- a/res/values/dimens.xml
+++ b/res/values/dimens.xml
@@ -23,7 +23,8 @@
<dimen name="setting_item_text_size">18sp</dimen>
<dimen name="setting_knob_width">20dp</dimen>
<dimen name="setting_knob_text_size">20dp</dimen>
- <dimen name="setting_item_text_width">95dp</dimen>
+<!-- zfl <dimen name="setting_item_text_width">95dp</dimen> -->
+ <dimen name="setting_item_text_width">120dp</dimen>
<dimen name="setting_popup_window_width">240dp</dimen>
<dimen name="setting_item_list_margin">14dp</dimen>十七：后置摄像头拍照画面拉伸
zfl@Exdroid:/media/home2/zfl/common_a20/android/packages/apps/Camera$ git diff res/values/arrays.xml
diff --git a/res/values/arrays.xml b/res/values/arrays.xml
index c6a823b..7c30b77 100644
--- a/res/values/arrays.xml
+++ b/res/values/arrays.xml
@@ -29,9 +29,9 @@
6
- @string/pref_video_quality_default
+ 5
- 4
+ @string/pref_video_quality_default
zfl@Exdroid:/media/home2/zfl/common_a20/android/packages/apps/Camera$ git diff res/values/strings.xml
diff --git a/res/values/strings.xml b/res/values/strings.xml
index 23ba8f8..9861be7 100644
--- a/res/values/strings.xml
+++ b/res/values/strings.xml
@@ -86,7 +86,7 @@
Video quality
- 5
+ 4
HD 1080p十八：在init.sunxx.rc中新建目录以及复制相关的文件到该目录（比如竞技摩托的lib库）
下面就已竞技摩托为例：场景是在固件中将竞技摩托放在system 的 app下，不能卸载，由于该app的lib库是在特定的目录下寻找，找不到直接报错，而不会再到system/lib下继续寻找，所以我们只能将其相关的Lib库放置在其目录下：
zfl@Exdroid:~/common_a20/android/device/softwinner/wingchiphd-other$ git diff init.sun7i.rc
diff --git a/init.sun7i.rc b/init.sun7i.rc
index 786309d..14f3e4e 100755
--- a/init.sun7i.rc
+++ b/init.sun7i.rc
@@ -42,7 +42,7 @@ on fs
exec /system/bin/logwrapper /system/bin/e2fsck -y /dev/block/cache
exec /system/bin/busybox mount -t ext4 -o noatime,nosuid,nodev,barrier=0,journal_checksum,noauto_da_alloc /dev/block/cache /cac
- format_userdata /dev/block/UDISK CT720
+ format_userdata /dev/block/UDISK CT720K
# zfl
format_userdata /dev/block/private PRIVATE
mkdir /mnt/private 0770 system system
@@ -61,6 +61,22 @@ on boot
insmod /system/vendor/modules/sw_device.ko
chmod 777 /data/misc
+mkdir /data/app-lib/RiptideGP
+chown root root /data/app-lib/RiptideGP
+chmod 0755 /data/app-lib/RiptideGP
+
+copy /system/lib/libBlue.so /data/app-lib/RiptideGP/libBlue.so
+chown root root /data/app-lib/RiptideGP/libBlue.so
+chmod 0755 /data/app-lib/RiptideGP/libBlue.so
+
+copy /system/lib/libfmodex.so /data/app-lib/RiptideGP/libfmodex.so
+chown root root /data/app-lib/RiptideGP/libfmodex.so
+chmod 0755 /data/app-lib/RiptideGP/libfmodex.so
+
+copy /system/lib/libfmodevent.so /data/app-lib/RiptideGP/libfmodevent.so
+chown root root /data/app-lib/RiptideGP/libfmodevent.so
+chmod 0755 /data/app-lib/RiptideGP/libfmodevent.so十九：按键音
zfl@Exdroid:~/common_a20/android/frameworks/base$ git diff policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
diff --git a/policy/src/com/android/internal/policy/impl/PhoneWindowManager.java b/policy/src/com/android/internal/policy/impl/Phone
index fc9bd0f..8635010 100755
--- a/policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
+++ b/policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
@@ -3565,6 +3565,12 @@ public class PhoneWindowManager implements WindowManagerPolicy {
return 0;
}
final boolean down = event.getAction() == KeyEvent.ACTION_DOWN;
+// zfl
+ if(!down) {
+ AudioManager am = (AudioManager)mContext.getSystemService(Context.AUDIO_SERVICE);
+ am.playSoundEffect(android.view.SoundEffectConstants.CLICK);
+ }
+
final boolean canceled = event.isCanceled();桌面Workspace文本大小设置
zfl@Exdroid:~/common_a20/android/packages/apps/Launcher2$ git diff src/com/android/launcher2/BubbleTextView.java
diff --git a/src/com/android/launcher2/BubbleTextView.java b/src/com/android/launcher2/BubbleTextView.java
index 610aedc..c86b49e 100755
--- a/src/com/android/launcher2/BubbleTextView.java
+++ b/src/com/android/launcher2/BubbleTextView.java
@@ -55,6 +55,8 @@ public class BubbleTextView extends TextView {
private int mPressedOutlineColor;
private int mPressedGlowColor;
+ private static final int bubbleTextInt = 14 ;
+
private boolean mBackgroundSizeChanged;
private Drawable mBackground;
@@ -79,6 +81,9 @@ public class BubbleTextView extends TextView {
private void init() {
mLongPressHelper = new CheckLongPressHelper(this);
mBackground = getBackground();
+ //zfl
+ super.setTextSize(bubbleTextInt) ;
+在配置中修改浏览器模式：
首先在build.prop中设置属性：ro.browser.user_agent
然后在java中修改相关代码即可：
zfl@Exdroid:~/common_a20/android/packages/apps/Browser$ git diff ./src/com/android/browser/preferences/BrowserModeFragment.java
diff --git a/src/com/android/browser/preferences/BrowserModeFragment.java b/src/com/android/browser/preferences/BrowserModeFragment.
index ab7a411..9e4bc40 100755
--- a/src/com/android/browser/preferences/BrowserModeFragment.java
+++ b/src/com/android/browser/preferences/BrowserModeFragment.java
@@ -45,8 +45,12 @@ public class BrowserModeFragment extends Fragment implements
LayoutParams lp = new LayoutParams(LayoutParams.MATCH_PARENT,
LayoutParams.WRAP_CONTENT);
radioGroup.setLayoutParams(lp);
- String def = mPref.getString(PreferenceKeys.PREF_USER_AGENT,
- "3");
+
+ //add by zfl
+ String user_agent = android.os.SystemProperties.get("ro.browser.user_agent" , "3") ;
+
+ String def = mPref.getString(PreferenceKeys.PREF_USER_AGENT, user_agent);
+
if (mEntries != null && mEntryValues != null) {去掉相机拍照时手势的缩放功能
zfl@Exdroid:~/common_a20/android/packages/apps/Camera$ git diff src/com/android/camera/ui/ZoomRenderer.java
diff --git a/src/com/android/camera/ui/ZoomRenderer.java b/src/com/android/camera/ui/ZoomRenderer.java
index 10c5e80..6643634 100644
--- a/src/com/android/camera/ui/ZoomRenderer.java
+++ b/src/com/android/camera/ui/ZoomRenderer.java
@@ -50,8 +50,8 @@ public class ZoomRenderer extends OverlayRenderer
private Rect mTextBounds;
public interface OnZoomChangedListener {
- void onZoomStart();
- void onZoomEnd();
+ void onZoomStart();
+ void onZoomEnd();
void onZoomValueChanged(int index); // only for immediate zoom
}
@@ -125,7 +125,7 @@ public class ZoomRenderer extends OverlayRenderer
@Override
public boolean onScale(ScaleGestureDetector detector) {
- final float sf = detector.getScaleFactor();
+ /* final float sf = detector.getScaleFactor();
float circle = (int) (mCircleSize * sf * sf);
circle = Math.max(mMinCircle, circle);
circle = Math.min(mMaxCircle, circle);
@@ -134,25 +134,28 @@ public class ZoomRenderer extends OverlayRenderer
int zoom = mMinZoom + (int) ((mCircleSize - mMinCircle) * (mMaxZoom - mMinZoom) / (mMaxCircle - mMinCircle));
mListener.onZoomValueChanged(zoom);
}
+ */
return true;
}
@Override
public boolean onScaleBegin(ScaleGestureDetector detector) {
- setVisible(true);
+ /* setVisible(true);
if (mListener != null) {
mListener.onZoomStart();
}
update();
+ */
return true;
}
@Override
public void onScaleEnd(ScaleGestureDetector detector) {
- setVisible(false);
+ /* setVisible(false);
if (mListener != null) {
mListener.onZoomEnd();
}
+*/
}
2156
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
