通过我这些天用C++读写bmp图像的经历,摸索再摸索,终于对bmp文件的结构、操作有了一定的了解,下面就大概介绍bmp图片纯C++的读取、旋转和保存的实现过程。
要用C++读取bmp图片文件,首先要弄清楚bmp格式图片文件的结构。可以参考这篇文章:http://blog.csdn.net/xiajun07061225/article/details/5813726
有几点需要注意的是:
在读取bmp图片的时候,一定要注意内存对齐的问题,譬如文件头,否则无法读取出正确结果。
关于图片的像素数据,每一行的像素的字节数必须是4的整数倍。如果不是,则需要补齐。一般来说,bmp图像文件的数据是从下到上,从左到右的。即从文件中最先读到的是图像最下面一行的左边第一个像素,然后是坐标第二个.....接下来是倒数第二行的第一个像素。
采用的编译环境是VS2008。
关于图像旋转,并不难。只需要搞清楚像素坐标变换公式就行。我以图像的中心点为坐标原点。先把像素在目标图像中的位置变化为坐标系中的位置,做旋转变换求出变换之前的在坐标系中的坐标,再变换为子啊图片中的位置。
公式:(x1,y1)是变换之前的坐标系中的坐标,(x2,y2)是变换之后的坐标系中的坐标。angle为逆时针旋转的角度数。
x1 = cos(angle)*x2-sin(angle)*y2;
y1 = sin(angle)*x2-cos(angle)*y2;
我的代码分为两个版本:灰度图的和彩色图的。
灰度图:
灰度图是只含亮度信息,不含彩色信息的图像。bmp格式文件中并没有灰度图这个概念,但是我们很容易地用bmp文件来表示灰度图。方法是用256色的调色板,只不过这个调色板有点特殊,每一项的RGB值都是相同的,从(0,0,0),(1,1,1),...,一直到(255,255,255)。这样,灰度图就可以用256色图来表示了。其图像数据就是调色板索引值,也就是实际的RGB的亮度值。另外因为是256色的调色板,所以图像数据中的一个字节代表一个像素。如果是彩色的256色图,图像处理后可能会产生不属于这256色的颜色,所以,图像处理一般采用灰度图。这也可以更好地将重点放在算法上。
下面是灰度图旋转代码,能处理任意尺寸的bmp灰度图,以及旋转任意角度(逆时针)。
代码包括两个文件:BmpRot.h和BmpRot.cpp
BmpRot.h:
- typedef unsigned char BYTE;
- typedef unsigned short WORD;
- typedef unsigned int DWORD;
- typedef long LONG;
- //位图文件头定义;
- //其中不包含文件类型信息(由于结构体的内存结构决定,
- //要是加了的话将不能正确读取文件信息)
- typedef struct tagBITMAPFILEHEADER{
- //WORD bfType;//文件类型,必须是0x424D,即字符“BM”
- DWORD bfSize;//文件大小
- WORD bfReserved1;//保留字
- WORD bfReserved2;//保留字
- DWORD bfOffBits;//从文件头到实际位图数据的偏移字节数
- }BITMAPFILEHEADER;
- typedef struct tagBITMAPINFOHEADER{
- DWORD biSize;//信息头大小
- LONG biWidth;//图像宽度
- LONG biHeight;//图像高度
- WORD biPlanes;//位平面数,必须为1
- WORD biBitCount;//每像素位数
- DWORD biCompression; //压缩类型
- DWORD biSizeImage; //压缩图像大小字节数
- LONG biXPelsPerMeter; //水平分辨率
- LONG biYPelsPerMeter; //垂直分辨率
- DWORD biClrUsed; //位图实际用到的色彩数
- DWORD biClrImportant; //本位图中重要的色彩数
- }BITMAPINFOHEADER; //位图信息头定义
- typedef struct tagRGBQUAD{
- BYTE rgbBlue; //该颜色的蓝色分量
- BYTE rgbGreen; //该颜色的绿色分量
- BYTE rgbRed; //该颜色的红色分量
- BYTE rgbReserved; //保留值
- }RGBQUAD;//调色板定义
- //像素信息
- typedef struct tagIMAGEDATA
- {
- BYTE blue;
- //BYTE green;
- //BYTE red;
- }IMAGEDATA;
- #include <stdio.h>
- #include "BmpRot.h"
- #include "stdlib.h"
- #include "math.h"
- #include <iostream>
- #define PI 3.14159//圆周率宏定义
- #define LENGTH_NAME_BMP 30//bmp图片文件名的最大长度
- using namespace std;
- //变量定义
- BITMAPFILEHEADER strHead;
- RGBQUAD strPla[256];//256色调色板
- BITMAPINFOHEADER strInfo;
- //显示位图文件头信息
- void showBmpHead(BITMAPFILEHEADER pBmpHead){
- cout<<"位图文件头:"<<endl;
- cout<<"文件大小:"<<pBmpHead.bfSize<<endl;
- cout<<"保留字_1:"<<pBmpHead.bfReserved1<<endl;
- cout<<"保留字_2:"<<pBmpHead.bfReserved2<<endl;
- cout<<"实际位图数据的偏移字节数:"<<pBmpHead.bfOffBits<<endl<<endl;
- }
- void showBmpInforHead(tagBITMAPINFOHEADER pBmpInforHead){
- cout<<"位图信息头:"<<endl;
- cout<<"结构体的长度:"<<pBmpInforHead.biSize<<endl;
- cout<<"位图宽:"<<pBmpInforHead.biWidth<<endl;
- cout<<"位图高:"<<pBmpInforHead.biHeight<<endl;
- cout<<"biPlanes平面数:"<<pBmpInforHead.biPlanes<<endl;
- cout<<"biBitCount采用颜色位数:"<<pBmpInforHead.biBitCount<<endl;
- cout<<"压缩方式:"<<pBmpInforHead.biCompression<<endl;
- cout<<"biSizeImage实际位图数据占用的字节数:"<<pBmpInforHead.biSizeImage<<endl;
- cout<<"X方向分辨率:"<<pBmpInforHead.biXPelsPerMeter<<endl;
- cout<<"Y方向分辨率:"<<pBmpInforHead.biYPelsPerMeter<<endl;
- cout<<"使用的颜色数:"<<pBmpInforHead.biClrUsed<<endl;
- cout<<"重要颜色数:"<<pBmpInforHead.biClrImportant<<endl;
- }
- int main(){
- char strFile[LENGTH_NAME_BMP];//bmp文件名
- IMAGEDATA *imagedata = NULL;//动态分配存储原图片的像素信息的二维数组
- IMAGEDATA *imagedataRot = NULL;//动态分配存储旋转后的图片的像素信息的二维数组
- int width,height;//图片的宽度和高度
- cout<<"请输入所要读取的文件名:"<<endl;
- cin>>strFile;
- FILE *fpi,*fpw;
- fpi=fopen(strFile,"rb");
- if(fpi != NULL){
- //先读取文件类型
- WORD bfType;
- fread(&bfType,1,sizeof(WORD),fpi);
- if(0x4d42!=bfType)
- {
- cout<<"the file is not a bmp file!"<<endl;
- return NULL;
- }
- //读取bmp文件的文件头和信息头
- fread(&strHead,1,sizeof(tagBITMAPFILEHEADER),fpi);
- //showBmpHead(strHead);//显示文件头
- fread(&strInfo,1,sizeof(tagBITMAPINFOHEADER),fpi);
- //showBmpInforHead(strInfo);//显示文件信息头
- //读取调色板
- for(unsigned int nCounti=0;nCounti<strInfo.biClrUsed;nCounti++)
- {
- fread((char *)&(strPla[nCounti].rgbBlue),1,sizeof(BYTE),fpi);
- fread((char *)&(strPla[nCounti].rgbGreen),1,sizeof(BYTE),fpi);
- fread((char *)&(strPla[nCounti].rgbRed),1,sizeof(BYTE),fpi);
- fread((char *)&(strPla[nCounti].rgbReserved),1,sizeof(BYTE),fpi);
- }
- width = strInfo.biWidth;
- height = strInfo.biHeight;
- //图像每一行的字节数必须是4的整数倍
- width = (width * sizeof(IMAGEDATA) + 3) / 4 * 4;
- //imagedata = (IMAGEDATA*)malloc(width * height * sizeof(IMAGEDATA));
- imagedata = (IMAGEDATA*)malloc(width * height);
- imagedataRot = (IMAGEDATA*)malloc(2 * width * 2 * height * sizeof(IMAGEDATA));
- //初始化原始图片的像素数组
- for(int i = 0;i < height;++i)
- {
- for(int j = 0;j < width;++j)
- {
- (*(imagedata + i * width + j)).blue = 0;
- //(*(imagedata + i * width + j)).green = 0;
- //(*(imagedata + i * width + j)).red = 0;
- }
- }
- //初始化旋转后图片的像素数组
- for(int i = 0;i < 2 * height;++i)
- {
- for(int j = 0;j < 2 * width;++j)
- {
- (*(imagedataRot + i * 2 * width + j)).blue = 0;
- //(*(imagedataRot + i * 2 * width + j)).green = 0;
- //(*(imagedataRot + i * 2 * width + j)).red = 0;
- }
- }
- //fseek(fpi,54,SEEK_SET);
- //读出图片的像素数据
- fread(imagedata,sizeof(struct tagIMAGEDATA) * width,height,fpi);
- fclose(fpi);
- }
- else
- {
- cout<<"file open error!"<<endl;
- return NULL;
- }
- //图片旋转处理
- int RotateAngle;//要旋转的角度数
- double angle;//要旋转的弧度数
- int midX_pre,midY_pre,midX_aft,midY_aft;//旋转所围绕的中心点的坐标
- midX_pre = width / 2;
- midY_pre = height / 2;
- midX_aft = width;
- midY_aft = height;
- int pre_i,pre_j,after_i,after_j;//旋转前后对应的像素点坐标
- cout<<"输入要旋转的角度(0度到360度,逆时针旋转):"<<endl;
- cin>>RotateAngle;
- angle = 1.0 * RotateAngle * PI / 180;
- for(int i = 0;i < 2 * height;++i)
- {
- for(int j = 0;j < 2 * width;++j)
- {
- after_i = i - midX_aft;//坐标变换
- after_j = j - midY_aft;
- pre_i = (int)(cos((double)angle) * after_i - sin((double)angle) * after_j) + midX_pre;
- pre_j = (int)(sin((double)angle) * after_i + cos((double)angle) * after_j) + midY_pre;
- if(pre_i >= 0 && pre_i < height && pre_j >= 0 && pre_j < width)//在原图范围内
- *(imagedataRot + i * 2 * width + j) = *(imagedata + pre_i * width + pre_j);
- }
- }
- //保存bmp图片
- if((fpw=fopen("b.bmp","wb"))==NULL)
- {
- cout<<"create the bmp file error!"<<endl;
- return NULL;
- }
- WORD bfType_w=0x4d42;
- fwrite(&bfType_w,1,sizeof(WORD),fpw);
- //fpw +=2;
- fwrite(&strHead,1,sizeof(tagBITMAPFILEHEADER),fpw);
- strInfo.biWidth = 2 * width;
- strInfo.biHeight = 2 * height;
- fwrite(&strInfo,1,sizeof(tagBITMAPINFOHEADER),fpw);
- //保存调色板数据
- for(unsigned int nCounti=0;nCounti<strInfo.biClrUsed;nCounti++)
- {
- fwrite(&strPla[nCounti].rgbBlue,1,sizeof(BYTE),fpw);
- fwrite(&strPla[nCounti].rgbGreen,1,sizeof(BYTE),fpw);
- fwrite(&strPla[nCounti].rgbRed,1,sizeof(BYTE),fpw);
- fwrite(&strPla[nCounti].rgbReserved,1,sizeof(BYTE),fpw);
- }
- //保存像素数据
- for(int i =0;i < 2 * height;++i)
- {
- for(int j = 0;j < 2 * width;++j)
- {
- fwrite( &((*(imagedataRot + i * 2 * width + j)).blue),1,sizeof(BYTE),fpw);
- //fwrite( &((*(imagedataRot + i * 2 * width + j)).green),1,sizeof(BYTE),fpw);
- //fwrite( &((*(imagedataRot + i * 2 * width + j)).red),1,sizeof(BYTE),fpw);
- }
- }
- fclose(fpw);
- //释放内存
- delete[] imagedata;
- delete[] imagedataRot;
- }
数据测试:
旋转前和旋转后的对比(45度):
彩色图:
彩色图的处理和灰度图略有不一样。主要是像素数据不同。由于每行数据的字节数必须是4的整数倍,这个地方处理起来要比灰度图麻烦很多,多以暂时还 没做好。本程序的局限性就是只能处理尺寸是4的整数倍的图片,可以旋转任意角度(逆时针)。
参考代码:分两个文件:BmpRot.h和BmpRot.cpp
BmpRot.h:
- typedef unsigned char BYTE;
- typedef unsigned short WORD;
- typedef unsigned int DWORD;
- typedef long LONG;
- //位图文件头定义;
- //其中不包含文件类型信息(由于结构体的内存结构决定,
- //要是加了的话将不能正确读取文件信息)
- typedef struct tagBITMAPFILEHEADER{
- //WORD bfType;//文件类型,必须是0x424D,即字符“BM”
- DWORD bfSize;//文件大小
- WORD bfReserved1;//保留字
- WORD bfReserved2;//保留字
- DWORD bfOffBits;//从文件头到实际位图数据的偏移字节数
- }BITMAPFILEHEADER;
- typedef struct tagBITMAPINFOHEADER{
- DWORD biSize;//信息头大小
- LONG biWidth;//图像宽度
- LONG biHeight;//图像高度
- WORD biPlanes;//位平面数,必须为1
- WORD biBitCount;//每像素位数
- DWORD biCompression; //压缩类型
- DWORD biSizeImage; //压缩图像大小字节数
- LONG biXPelsPerMeter; //水平分辨率
- LONG biYPelsPerMeter; //垂直分辨率
- DWORD biClrUsed; //位图实际用到的色彩数
- DWORD biClrImportant; //本位图中重要的色彩数
- }BITMAPINFOHEADER; //位图信息头定义
- typedef struct tagRGBQUAD{
- BYTE rgbBlue; //该颜色的蓝色分量
- BYTE rgbGreen; //该颜色的绿色分量
- BYTE rgbRed; //该颜色的红色分量
- BYTE rgbReserved; //保留值
- }RGBQUAD;//调色板定义
- //像素信息
- typedef struct tagIMAGEDATA
- {
- BYTE red;
- BYTE green;
- BYTE blue;
- }IMAGEDATA;
BmpRot.cpp:
- #include <stdio.h>
- #include "BmpRot.h"
- #include "stdlib.h"
- #include "math.h"
- #include <iostream>
- #define PI 3.14159//圆周率宏定义
- #define LENGTH_NAME_BMP 30//bmp图片文件名的最大长度
- using namespace std;
- //变量定义
- BITMAPFILEHEADER strHead;
- RGBQUAD strPla[256];//256色调色板
- BITMAPINFOHEADER strInfo;
- //显示位图文件头信息
- void showBmpHead(BITMAPFILEHEADER pBmpHead){
- cout<<"位图文件头:"<<endl;
- cout<<"文件大小:"<<pBmpHead.bfSize<<endl;
- cout<<"保留字_1:"<<pBmpHead.bfReserved1<<endl;
- cout<<"保留字_2:"<<pBmpHead.bfReserved2<<endl;
- cout<<"实际位图数据的偏移字节数:"<<pBmpHead.bfOffBits<<endl<<endl;
- }
- void showBmpInforHead(tagBITMAPINFOHEADER pBmpInforHead){
- cout<<"位图信息头:"<<endl;
- cout<<"结构体的长度:"<<pBmpInforHead.biSize<<endl;
- cout<<"位图宽:"<<pBmpInforHead.biWidth<<endl;
- cout<<"位图高:"<<pBmpInforHead.biHeight<<endl;
- cout<<"biPlanes平面数:"<<pBmpInforHead.biPlanes<<endl;
- cout<<"biBitCount采用颜色位数:"<<pBmpInforHead.biBitCount<<endl;
- cout<<"压缩方式:"<<pBmpInforHead.biCompression<<endl;
- cout<<"biSizeImage实际位图数据占用的字节数:"<<pBmpInforHead.biSizeImage<<endl;
- cout<<"X方向分辨率:"<<pBmpInforHead.biXPelsPerMeter<<endl;
- cout<<"Y方向分辨率:"<<pBmpInforHead.biYPelsPerMeter<<endl;
- cout<<"使用的颜色数:"<<pBmpInforHead.biClrUsed<<endl;
- cout<<"重要颜色数:"<<pBmpInforHead.biClrImportant<<endl;
- }
- int main(){
- char strFile[LENGTH_NAME_BMP];//bmp文件名
- IMAGEDATA *imagedata = NULL;//动态分配存储原图片的像素信息的二维数组
- IMAGEDATA *imagedataRot = NULL;//动态分配存储旋转后的图片的像素信息的二维数组
- int width,height;//图片的宽度和高度
- cout<<"请输入所要读取的文件名:"<<endl;
- cin>>strFile;
- FILE *fpi,*fpw;
- fpi=fopen(strFile,"rb");
- if(fpi != NULL){
- //先读取文件类型
- WORD bfType;
- fread(&bfType,1,sizeof(WORD),fpi);
- if(0x4d42!=bfType)
- {
- cout<<"the file is not a bmp file!"<<endl;
- return NULL;
- }
- //读取bmp文件的文件头和信息头
- fread(&strHead,1,sizeof(tagBITMAPFILEHEADER),fpi);
- //showBmpHead(strHead);//显示文件头
- fread(&strInfo,1,sizeof(tagBITMAPINFOHEADER),fpi);
- //showBmpInforHead(strInfo);//显示文件信息头
- //读取调色板
- for(unsigned int nCounti=0;nCounti<strInfo.biClrUsed;nCounti++)
- {
- //存储的时候,一般去掉保留字rgbReserved
- fread((char *)&strPla[nCounti].rgbBlue,1,sizeof(BYTE),fpi);
- fread((char *)&strPla[nCounti].rgbGreen,1,sizeof(BYTE),fpi);
- fread((char *)&strPla[nCounti].rgbRed,1,sizeof(BYTE),fpi);
- cout<<"strPla[nCounti].rgbBlue"<<strPla[nCounti].rgbBlue<<endl;
- cout<<"strPla[nCounti].rgbGreen"<<strPla[nCounti].rgbGreen<<endl;
- cout<<"strPla[nCounti].rgbRed"<<strPla[nCounti].rgbRed<<endl;
- }
- width = strInfo.biWidth;
- height = strInfo.biHeight;
- imagedata = (IMAGEDATA*)malloc(width * height * sizeof(IMAGEDATA));
- imagedataRot = (IMAGEDATA*)malloc(2 * width * 2 * height * sizeof(IMAGEDATA));
- //初始化原始图片的像素数组
- for(int i = 0;i < height;++i)
- {
- for(int j = 0;j < width;++j)
- {
- (*(imagedata + i * width + j)).blue = 0;
- (*(imagedata + i * width + j)).green = 0;
- (*(imagedata + i * width + j)).red = 0;
- }
- }
- //初始化旋转后图片的像素数组
- for(int i = 0;i < 2 * height;++i)
- {
- for(int j = 0;j < 2 * width;++j)
- {
- (*(imagedataRot + i * 2 * width + j)).blue = 0;
- (*(imagedataRot + i * 2 * width + j)).green = 0;
- (*(imagedataRot + i * 2 * width + j)).red = 0;
- }
- }
- //fseek(fpi,54,SEEK_SET);
- //读出图片的像素数据
- fread(imagedata,sizeof(struct tagIMAGEDATA) * width,height,fpi);
- /*
- for(int i = 0;i < height;++i)
- {
- fread(imagedata + i * width * sizeof(IMAGEDATA),sizeof(struct tagIMAGEDATA) * width,height,fpi);
- }*/
- fclose(fpi);
- }
- else
- {
- cout<<"file open error!"<<endl;
- return NULL;
- }
- //图片旋转处理
- int RotateAngle;//要旋转的角度数
- double angle;//要旋转的弧度数
- int midX_pre,midY_pre,midX_aft,midY_aft;//旋转所围绕的中心点的坐标
- midX_pre = width / 2;
- midY_pre = height / 2;
- midX_aft = width;
- midY_aft = height;
- int pre_i,pre_j,after_i,after_j;//旋转前后对应的像素点坐标
- cout<<"输入要旋转的角度(0度到360度,逆时针旋转):"<<endl;
- cin>>RotateAngle;
- angle = 1.0 * RotateAngle * PI / 180;
- for(int i = 0;i < 2 * height;++i)
- {
- for(int j = 0;j < 2 * width;++j)
- {
- after_i = i - midX_aft;//坐标变换
- after_j = j - midY_aft;
- pre_i = (int)(cos((double)angle) * after_i - sin((double)angle) * after_j) + midX_pre;
- pre_j = (int)(sin((double)angle) * after_i + cos((double)angle) * after_j) + midY_pre;
- if(pre_i >= 0 && pre_i < height && pre_j >= 0 && pre_j < width)//在原图范围内
- *(imagedataRot + i * 2 * width + j) = *(imagedata + pre_i * width + pre_j);
- }
- }
- //保存bmp图片
- if((fpw=fopen("b.bmp","wb"))==NULL)
- {
- cout<<"create the bmp file error!"<<endl;
- return NULL;
- }
- WORD bfType_w=0x4d42;
- fwrite(&bfType_w,1,sizeof(WORD),fpw);
- //fpw +=2;
- fwrite(&strHead,1,sizeof(tagBITMAPFILEHEADER),fpw);
- strInfo.biWidth = 2 * width;
- strInfo.biHeight = 2 * height;
- fwrite(&strInfo,1,sizeof(tagBITMAPINFOHEADER),fpw);
- //保存调色板数据
- for(unsigned int nCounti=0;nCounti<strInfo.biClrUsed;nCounti++)
- {
- fwrite(&strPla[nCounti].rgbBlue,1,sizeof(BYTE),fpw);
- fwrite(&strPla[nCounti].rgbGreen,1,sizeof(BYTE),fpw);
- fwrite(&strPla[nCounti].rgbRed,1,sizeof(BYTE),fpw);
- }
- //保存像素数据
- for(int i =0;i < 2 * height;++i)
- {
- for(int j = 0;j < 2 * width;++j)
- {
- fwrite( &(*(imagedataRot + i * 2 * width + j)).red,1,sizeof(BYTE),fpw);//注意三条语句的顺序:否则颜色会发生变化
- fwrite( &(*(imagedataRot + i * 2 * width + j)).green,1,sizeof(BYTE),fpw);
- fwrite( &(*(imagedataRot + i * 2 * width + j)).blue,1,sizeof(BYTE),fpw);
- }
- }
- fclose(fpw);
- //释放内存
- delete[] imagedata;
- delete[] imagedataRot;
- }
数据测试:
注意:颜色问题已解决。请看代码中注释部分。
引自:http://blog.csdn.net/xiajun07061225/article/details/6633938