samsung GT 7510 host 失败

尝试在android 平板里加载usbserial驱动
/data/data/berserker.android.apps.sshdroid/home # modprobe usbserial
modprobe: 'usbserial.ko': unknown symbol in module or invalid parameter

查看dmesg:
[ 3805.921940] usbserial: Unknown symbol add_preempt_count (err 0)
[ 3805.924543] usbserial: Unknown symbol sub_preempt_count (err 0)
请问是什么原因？

我偷懒menuconfig后没有编image，直接编modules的

azzurris 发表于 2012-01-06 10:47 
内核抢占没开

有人说是内核抢占没打开，config中 抢占是开了，后来看代码发现是因为
#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
这2个没关闭

接着又碰到问题，
我自己编的usbserial mod最终没能安装上，根据提示是 内核已经编进去了，但是它居然没把generic_driver编译进内核 ，太狠了。
[    7.000666] usbcore: registered new interface driver libusual
[    7.000790] usbcore: registered new interface driver usbserial
[    7.000799] usbserial: USB Serial Driver core
[    7.000899] tegra_usb_phy_open() called instance :0
这样我是不知道该如何才能使用usb线实现 usbserial功能了。。。vid，pid不知道如何传入了。。。？

尝试编译了pl2303，驱动倒是modprobe成功了，可是接上otg线+usb 转串口的pl2303，提示失败。。。还不清楚原因，我贴出一些log
[  362.658406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  362.658417] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  362.658427] usb usb1: Product: Tegra EHCI Host Controller
[  362.658435] usb usb1: Manufacturer: Linux 2.6.36.3 ehci_hcd
[  362.658442] usb usb1: SerialNumber: tegra-ehci.0
[  362.660270] hub 1-0:1.0: USB hub found
[  362.660297] hub 1-0:1.0: 1 port detected
[  362.660961] tegra-otg tegra-otg: tegra_start_host-
[  362.660972] host_notify: ndev name=usb_otg: from state=0 -> to state=1
[  362.878383] usb 1-1: new full speed USB device using tegra-ehci and address 2
[  363.311812] usb 1-1: device v067b p2303 is not supported
[  363.338505] host_notify: ndev name=tegra-ehci.0: from state=0 -> to state=5
[  363.340906] hub 1-0:1.0: unable to enumerate USB device on port 1
[  363.498483] usb 1-1: new full speed USB device using tegra-ehci and address 3
[  363.931780] usb 1-1: device v067b p2303 is not supported
[  363.958407] host_notify: ndev name=tegra-ehci.0: from state=5 -> to state=5
[  363.958490] hub 1-0:1.0: unable to enumerate USB device on port 1
[  364.118983] usb 1-1: new full speed USB device using tegra-ehci and address 4
[  364.348918] usb 1-1: device v067b p2303 is not supported
[  364.378330] host_notify: ndev name=tegra-ehci.0: from state=5 -> to state=5
[  364.378374] hub 1-0:1.0: unable to enumerate USB device on port 1

idVendor=1d6b, idProduct=0002 加入pl2303 driver, 还是一样不支持。 加入usb serial driver是 无法验证的，因为我没有厂家内核源码，而他们又把serial 编进了内核。 
另外 idVendor=1d6b, idProduct=0002 这个只是OTG 线的Pid/Vid

哪位研究过usb的给点启发吧，谢谢了