接https://blog.csdn.net/pxy198831/article/details/87017571DSP TMS320C5509A 控制DDS AD9854芯片进行AM幅度调制
AM-MSK调制是MSK的变种,用于航空ACARS通信。
以1200Hz表示数据位和前一位不同,2400Hz表示数据位和前一位相同。两种高低频率的相位连续。
由于传送速率为2400Hz,传输一位数据2400Hz的调制信号是一个周期的波形,而1200Hz则是半个周期的波形。
由于起始相位不同,0,1分别对应4种不同的情况,这样做的好处是能够保证相位连续。
2400Hz和1200Hz的ROM表可以用MATLAB生成,可以生成通用的也可以根据采用频率生成
专用的ROM表,具体看代码。
interrupt void dmaCh0Isr(void)
{
int I_Q_result;
static int AM_MSK24[18]={0,12062,22430,29648,32702,31166,25248,15788,4106,-8149,-19261,-27666,
-32188,-32188,-27666,-19261,-8149,4106};
static int AM_MSK12[34]={0,6141,12062,17557,22430,26509,29648,31739,32702,32509,31166,
28715,25248,20886,15788,10125, 4106,-2058,-8149,-13953,-19261,-23888,-27666,-30468,-32188,-32678,-32188,-30468,-27666,-23888,-19261,-13953, -8149,-2058};
static int AM_MSK_DATA[10]={0,1,0,0,1,1,1,0,0,1};
int ATW;
static int noise_flag = 0,i_18=0,j_34=0,k_10=0;
unsigned char AM_H,AM_L;
static int fase=0;
//unsigned int AM_register = 0;
//float ac,dc;
//float temp;
//static int i;
//long int tmp;
//处理接收到的事情
// dmaCh0Process();
//Read the DMA status register to clear it so new interrupts will be seen
DMA_RGETH(hDMACH0,DMACSR);
DMA_start(hDMACH0); /* Begin Transfer */
// head++;
*/
if (dds_flag == 1)
{
if(k_10==10)
{
k_10=0;
}
if ((j_34==17)||(j_34==34))
{
j_34=0;
k_10++;
}
if (i_18==18)
{
i_18=0;
k_10++;
}
if (k_10 == 0)
{
if(AM_MSK_DATA[k_10]==0)
{
I_Q_result = AGC_audio(AM_MSK12[j_34]);
}
else
{
I_Q_result = AGC_audio(AM_MSK12[j_34+17]);
}
j_34++;
}
else
{
if(AM_MSK_DATA[k_10]==AM_MSK_DATA[k_10-1])
{
if(AM_MSK_DATA[k_10]==0)
{
I_Q_result = 0-AGC_audio(AM_MSK24[i_18++]);
}
else
{
I_Q_result = AGC_audio(AM_MSK24[i_18++]);
}
}
else
{
if(AM_MSK_DATA[k_10]==0)
{
I_Q_result = AGC_audio(AM_MSK12[j_34]);
}
else
{
I_Q_result = AGC_audio(AM_MSK12[j_34+17]);
}
j_34++;
}
}
fir((DATA *)&I_Q_result, (DATA *)B_BS,(DATA *)&I_Q_result, BS_dbuf,1,BL_BS);
// audio_DDS[Index] += 32768;
// I_Q_result = 2*A*((float)I_Q_result)/(1+A);
if (I_Q_result > 0)
{
I_Q_result = ((float)I_Q_result)/8192*2048;
}
if (I_Q_result < 0)
{
I_Q_result = ((float)I_Q_result)/8192*2048;
}
// dc = 2048;
// dc = ((1-A)*0x3fff)/(1+A);
// ac = (2*A*I_Q_result)/(1+A);
ATW = (2*A*I_Q_result)/(1+A) + 2048;
// temp = ATW;
// ATW = (temp/65536)*4096;
AM_H = (ATW&0x0f00)>>8;
AM_L = ATW&0xff;
audio_DDS[Index] = (AM_H<<8)|AM_L;
if(Index>=200)
{
Index = 0;
}
if (audio_DDS[Index++] > 1000)
{
if (noise_flag<200)
{
noise_flag++;
}
}
else
{
noise_flag = 0;
}
if (noise_flag != 200)
{
AD9854_WR_Byte(OSK_I1_ADDRESS,AM_H); //设置I通道幅度
AD9854_WR_Byte(OSK_I2_ADDRESS,AM_L);
}
else
{
AD9854_WR_Byte(OSK_I1_ADDRESS,0xff); //设置I通道幅度
AD9854_WR_Byte(OSK_I2_ADDRESS,0xff);
}
ad9854_update();
rear++;
}
}