TUXEDO多机模式的配置

TUXEDO多机模式的配置

tuxedo多机方式配置有两个方面

1.启动tlisten

tlisten在tuxedo启动时扮演控制者的角色,在非master机上由tlisten启动bbl和应用服务器,tlisten的启动方法为

tlisten   -l //host:ipport<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

注意这里的ipport必须和ubb文件中NETWORK域NLSADDR一致

tlisten必须在所有的机器上启动,启动后才能运行tmboot.建议操作系统启动时就运行tlisten.

2.ubb文件配置

对于多机模式一般就是指单一domain管理的多台机器,所有机器上仅需要一个ubb文件,以下是ubb文件的模板

*RESOURCES

IPCKEY      80952

MAXACCESSERS    40

MAXSERVERS  35

MAXSERVICES 75

MASTER      SITE1,SITE2

OPTIONS LAN,MIGRATE

MODEL       MP

*MACHINES

<SITE1's uname> LMID=SITE1

        TUXDIR="<TUXDIR1>"

        APPDIR="<APPDIR1>"

        TUXCONFIG="<APPDIR1>/tuxconfig"

        TYPE="<machine type1>"

        ULOGPFX="<APPDIR1>/ULOG"

<SITE2's uname> LMID=SITE2

        TUXDIR="<TUXDIR2>"

        APPDIR="<APPDIR2>"

        TLOGDEVICE="<APPDIR2>/TLOG"

        TLOGNAME=TLOG

        TUXCONFIG="<APPDIR2>/tuxconfig"

        TYPE="<machine type2>"

        ULOGPFX="<APPDIR2>/ULOG"

#

*GROUPS

*NETWORK

SITE1   NADDR="<network address of SITE1>"

    BRIDGE="<device of provider1>"

    NLSADDR="<network listener address of SITE1>"

SITE2   NADDR="<network address of SITE2>"

    BRIDGE="<device of provider2>"

    NLSADDR="<network listener address of SITE2>"

*SERVERS

DEFAULT: RESTART=Y MAXGEN=5 REPLYQ=Y CLOPT="-A"

#

*SERVICES

3.   管理

只能在master机上运行tmadmin进行管理。要获得统计信息在tmadmin中应运行default –m命令。

例如:

tmadmin

>default –m SITE1

>printservice

 

Sample:

#ident       "@(#) samples/atmi/simpapp/ubbmp        $Revision: 1.2.8.1 $"

 

*RESOURCES

IPCKEY             87654

 

MASTER            site1,site2

MAXACCESSERS     40

MAXSERVERS 20

MAXSERVICES         40

UID           0

GID           0

MODEL             MP

OPTIONS          LAN,MIGRATE

 

*MACHINES

CHRIS                LMID=site1

                   APPDIR="d:/tuxedo/samples/atmi/simpapp"

                   TUXCONFIG="d:/tuxedo/samples/atmi/simpapp/tuxconfig"

#                TYPE="<Replace with the proper machine type for site1>"

                   TUXDIR="d:/tuxedo"

 

chrislinux          LMID=site2

                   APPDIR="/home/tuxedo/samples/atmi/simpapp"

                   TUXCONFIG="/home/tuxedo/samples/atmi/simpapp/tuxconfig"

#                TYPE="<Replace with the proper machine type for site2>"

                   TUXDIR="/home/tuxedo"

                   UID=503

                   GID=503

 

*GROUPS

GROUP1

         LMID=site1      GRPNO=1        OPENINFO=NONE

GROUP2

         LMID=site2      GRPNO=2        OPENINFO=NONE

 

*NETWORK

site1 NADDR="//10.10.10.10:6033"

         NLSADDR="//10.10.10.10:6034"

#       BRIDGE="<Replace with the network device or omit if there is none>"

 

site2 NADDR="//10.10.10.11:6033"

         NLSADDR="//10.10.10.11:6034"

#       BRIDGE="<Replace with the network device or omit if there is none>"

 

*SERVERS

DEFAULT:

                   CLOPT="-A"

 

simpserv   SRVGRP=GROUP1 SRVID=3

 

*SERVICES

TOUPPER

展开阅读全文

没有更多推荐了,返回首页