%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Introduction to Matlab
% (adapted from http://www.stanford.edu/class/cs223b/matlabIntro.html)
%
% Stefan Roth <roth (AT) cs DOT brown DOT edu>, 09/08/2003
%
% Stolen from cs143 for cs195g by
% Patrick Doran <pdoran (AT) cs DOT brown DOT edu>, 01/30/2010
%
% Last modified: 01/30/2010
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (1) Basics
% The symbol "%" is used to indicate a comment (for the remainder of
% the line).
% When writing a long Matlab statement that becomes to long for a
% single line use "..." at the end of the line to continue on the next
% line. E.g.
A = [1, 2; ...
3, 4];
% A semicolon at the end of a statement means that Matlab will not
% display the result of the evaluated statement. If the ";" is omitted
% then Matlab will display the result. This is also useful for
% printing the value of variables, e.g.
A
% Matlab's command line is a little like a standard shell:
% - Use the up arrow to recall commands without retyping them (and
% down arrow to go forward in the command history).
% - C-a moves to beginning of line (C-e for end), C-f moves forward a
% character and C-b moves back (equivalent to the left and right
% arrow keys), C-d deletes a character, C-k deletes the rest of the
% line to the right of the cursor, C-p goes back through the
% command history and C-n goes forward (equivalent to up and down
% arrows), Tab tries to complete a command.
% Simple debugging:
% If the command "dbstop if error" is issued before running a script
% or a function that causes a run-time error, the execution will stop
% at the point where the error occurred. Very useful for tracking down
% errors.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (2) Basic types in Matlab
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (A) The basic types in Matlab are scalars (usually double-precision
% floating point), vectors, and matrices:
A = [1 2; 3 4]; % Creates a 2x2 matrix
B = [1,2; 3,4]; % The simplest way to create a matrix is
% to list its entries in square brackets.
% The ";" symbol separates rows;
% the (optional) "," separates columns.
N = 5 % A scalar
v = [1 0 0] % A row vector
v = [1; 2; 3] % A column vector
v = v' % Transpose a vector (row to column or
% column to row)
v = 1:.5:3 % A vector filled in a specified range:
v = pi*[-4:4]/4 % [start:stepsize:end]
% (brackets are optional)
v = [] % Empty vector
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (B) Creating special matrices: 1ST parameter is ROWS,
% 2ND parameter is COLS
m = zeros(2, 3) % Creates a 2x3 matrix of zeros
v = ones(1, 3) % Creates a 1x3 matrix (row vector) of ones
m = eye(3) % Identity matrix (3x3)
v = rand(3, 1) % Randomly filled 3x1 matrix (column
% vector); see also randn
% But watch out:
m = zeros(3) % Creates a 3x3 matrix (!) of zeros
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (C) Indexing vectors and matrices.
% Warning: Indices always start at 1 and *NOT* at 0!
v = [1 2 3];
v(3) % Access a vector element
m = [1 2 3 4; 5 7 8 8; 9 10 11 12; 13 14 15 16]
m(1, 3) % Access a matrix element
% matrix(ROW #, COLUMN #)
m(2, :) % Access a whole matrix row (2nd row)
m(:, 1) % Access a whole matrix column (1st column)
m(1, 1:3) % Access elements 1 through 3 of the 1st row
m(2:3, 2) % Access elements 2 through 3 of the
% 2nd column
m(2:end, 3) % Keyword "end" accesses the remainder of a
% column or row
m = [1 2 3; 4 5 6]
size(m) % Returns the size of a matrix
size(m, 1) % Number of rows
size(m, 2) % Number of columns
m1 = zeros(size(m)) % Create a new matrix with the size of m
who % List variables in workspace
whos % List variables w/ info about size, type, etc.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (3) Simple operations on vectors and matrices
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (A) Element-wise operations:
% These operations are done "element by element". If two
% vectors/matrices are to be added, subtracted, or element-wise
% multiplied or divided, they must have the same size.
a = [1 2 3 4]'; % A column vector
2 * a % Scalar multiplication
a / 4 % Scalar division
b = [5 6 7 8]'; % Another column vector
a + b % Vector addition
a - b % Vector subtraction
a .^ 2 % Element-wise squaring (note the ".")
a .* b % Element-wise multiplication (note the ".")
a ./ b % Element-wise division (note the ".")
log([1 2 3 4]) % Element-wise logarithm
round([1.5 2; 2.2 3.1]) % Element-wise rounding to nearest integer
% Other element-wise arithmetic operations include e.g. :
% floor, ceil, ...
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (B) Vector Operations
% Built-in Matlab functions that operate on vectors
a = [1 4 6 3] % A row vector
sum(a) % Sum of vector elements
mean(a) % Mean of vector elements
var(a) % Variance of elements
std(a) % Standard deviation
max(a) % Maximum
min(a) % Minimum
% If a matrix is given, then these functions will operate on each column
% of the matrix and return a row vector as result
a = [1 2 3; 4 5 6] % A matrix
mean(a) % Mean of each column
max(a) % Max of each column
max(max(a)) % Obtaining the max of a matrix
mean(a, 2) % Mean of each row (second argument specifies
% dimension along which operation is taken)
[1 2 3] * [4 5 6]' % 1x3 row vector times a 3x1 column vector
% results in a scalar. Known as dot product
% or inner product. Note the absence of "."
[1 2 3]' * [4 5 6] % 3x1 column vector times a 1x3 row vector
% results in a 3x3 matrix. Known as outer
% product. Note the absence of "."
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (C) Matrix Operations:
a = rand(3,2) % A 3x2 matrix
b = rand(2,4) % A 2x4 matrix
c = a * b % Matrix product results in a 3x4 matrix
a = [1 2; 3 4; 5 6]; % A 3x2 matrix
b = [5 6 7]; % A 1x3 row vector
b * a % Vector-matrix product results in
% a 1x2 row vector
c = [8; 9]; % A 2x1 column vector
a * c % Matrix-vector product results in
% a 3x1 column vector
a = [1 3 2; 6 5 4; 7 8 9]; % A 3x3 matrix
inv(a) % Matrix inverse of a
eig(a) % Vector of eigenvalues of a
[V, D] = eig(a) % D matrix with eigenvalues on diagonal;
% V matrix of eigenvectors
% Example for multiple return values!
[U, S, V] = svd(a) % Singular value decomposition of a.
% a = U * S * V', singular values are
% stored in S
% Other matrix operations: det, norm, rank, ...
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (D) Reshaping and assembling matrices:
a = [1 2; 3 4; 5 6]; % A 3x2 matrix
b = a(:) % Make 6x1 column vector by stacking
% up columns of a
sum(a(:)) % Useful: sum of all elements
a = reshape(b, 2, 3) % Make 2x3 matrix out of vector
% elements (column-wise)
a = [1 2]; b = [3 4]; % Two row vectors
c = [a b] % Horizontal concatenation (see horzcat)
a = [1; 2; 3]; % Column vector
c = [a; 4] % Vertical concatenation (see vertcat)
a = [eye(3) rand(3)] % Concatenation for matrices
b = [eye(3); ones(1, 3)]
b = repmat(5, 3, 2) % Create a 3x2 matrix of fives
b = repmat([1 2; 3 4], 1, 2) % Replicate the 2x2 matrix twice in
% column direction; makes 2x4 matrix
b = diag([1 2 3]) % Create 3x3 diagonal matrix with given
% diagonal elements
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% (4) Control statements & vectorization
% Syntax of control flow statements:
%
% for VARIABLE = EXPR
% STATEMENT
% ...
% STATEMENT
% end
%
% EXPR is a vector here, e.g. 1:10 or -1:0.5:1 or [1 4 7]
%
%
% while EXPRESSION
% STATEMENTS
% end
%
% if EXPRESSION
% STATEMENTS
% elseif EXPRESSION
% STATEMENTS
% else
% STATEMENTS
% end
%
% (elseif and else clauses are optional, the "end" is required)
%
% EXPRESSIONs are usually made of relational clauses, e.g. a < b
% The operators are <, >, <=, >=, ==, ~= (almost like in C(++))
% Warning:
% Loops run very slowly in Matlab, because of interpretation overhead.
% This has gotten somewhat better in version 6.5, but you should
% nevertheless try to avoid them by "vectorizing" the computation,
% i.e. by rewriting the code in form of matrix operations. This is
% illustrated in some examples below.
% Examples:
for i=1:2:7 % Loop from 1 to 7 in steps of 2
i % Print i
end
for i=[5 13 -1] % Loop over given vector
if (i > 10) % Sample if statement
disp('Larger than 10') % Print given string
elseif i < 0 % Parentheses are optional
disp('Negative value')
else
disp('Something else')
end
end
% Here is another example: given an mxn matrix A and a 1xn
% vector v, we want to subtract v from every row of A.
m = 50; n = 10; A = ones(m, n); v = 2 * rand(1, n);
%
% Implementation using loops:
for i=1:m
A(i,:) = A(i,:) - v;
end
% We can compute the same thing using only matrix operations
A = ones(m, n) - repmat(v, m, 1); % This version of the code runs
% much faster!!!
% We can vectorize the computation even when loops contain
% conditional statements.
%
% Example: given an mxn matrix A, create a matrix B of the same size
% containing all zeros, and then copy into B the elements of A that
% are greater than zero.
% Implementation using loops:
B = zeros(m,n);
for i=1:m
for j=1:n
if A(i,j)>0
B(i,j) = A(i,j);
end
end
end
% All this can be computed w/o any loop!
B = zeros(m,n);
ind = find(A > 0); % Find indices of positive elements of A
% (see "help find" for more info)
B(ind) = A(ind); % Copies into B only the elements of A
% that are > 0
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%(5) Saving your work
save myfile % Saves all workspace variables into
% file myfile.mat
save myfile a b % Saves only variables a and b
clear a b % Removes variables a and b from the
% workspace
clear % Clears the entire workspace
load myfile % Loads variable(s) from myfile.mat
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%(6) Creating scripts or functions using m-files:
%
% Matlab scripts are files with ".m" extension containing Matlab
% commands. Variables in a script file are global and will change the
% value of variables of the same name in the environment of the current
% Matlab session. A script with name "script1.m" can be invoked by
% typing "script1" in the command window.
% Functions are also m-files. The first line in a function file must be
% of this form:
% function [outarg_1, ..., outarg_m] = myfunction(inarg_1, ..., inarg_n)
%
% The function name should be the same as that of the file
% (i.e. function "myfunction" should be saved in file "myfunction.m").
% Have a look at myfunction.m and myotherfunction.m for examples.
%
% Functions are executed using local workspaces: there is no risk of
% conflicts with the variables in the main workspace. At the end of a
% function execution only the output arguments will be visible in the
% main workspace.
a = [1 2 3 4]; % Global variable a
b = myfunction(2 * a) % Call myfunction which has local
% variable a
a % Global variable a is unchanged
[c, d] = ...
myotherfunction(a, b) % Call myotherfunction with two return
% values
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%(7) Plotting
x = [0 1 2 3 4]; % Basic plotting
plot(x); % Plot x versus its index values
pause % Wait for key press
plot(x, 2*x); % Plot 2*x versus x
axis([0 8 0 8]); % Adjust visible rectangle
figure; % Open new figure
x = pi*[-24:24]/24;
plot(x, sin(x));
xlabel('radians'); % Assign label for x-axis
ylabel('sin value'); % Assign label for y-axis
title('dummy'); % Assign plot title
figure;
subplot(1, 2, 1); % Multiple functions in separate graphs
plot(x, sin(x)); % (see "help subplot")
axis square; % Make visible area square
subplot(1, 2, 2);
plot(x, 2*cos(x));
axis square;
figure;
plot(x, sin(x));
hold on; % Multiple functions in single graph
plot(x, 2*cos(x), '--'); % '--' chooses different line pattern
legend('sin', 'cos'); % Assigns names to each plot
hold off; % Stop putting multiple figures in current
% graph
figure; % Matrices vs. images
m = rand(64,64);
imagesc(m) % Plot matrix as image
colormap gray; % Choose gray level colormap
axis image; % Show pixel coordinates as axes
axis off; % Remove axes
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%(8) Working with (gray level) images
I = imread('cit.png'); % Read a PNG image
figure
imagesc(I) % Display it as gray level image
colormap gray;
colorbar % Turn on color bar on the side
pixval % Display pixel values interactively
truesize % Display at resolution of one screen
% pixel per image pixel
truesize(2*size(I)) % Display at resolution of two screen
% pixels per image pixel
I2 = imresize(I, 0.5, 'bil'); % Resize to 50% using bilinear
% interpolation
I3 = imrotate(I2, 45, ... % Rotate 45 degrees and crop to
'bil', 'crop'); % original size
I3 = double(I2); % Convert from uint8 to double, to allow
% math operations
imagesc(I3.^2) % Display squared image (pixel-wise)
imagesc(log(I3)) % Display log of image (pixel-wise)
I3 = uint8(I3); % Convert back to uint8 for writing
imwrite(I3, 'test.png') % Save image as PNG
figure;
g = [1 2 1]' * [1 2 1] / 16; % 3x3 Gaussian filter mask
I2 = double(I); % Convert image to floating point
I3 = conv2(I2, g); % Convolve image with filter mask
I3 = conv2(I2, g, 'same'); % Convolve image, but keep original size
subplot(1, 2, 1) % Display original and filtered image
imagesc(I); % side-by-side
axis square;
colormap gray;
subplot(1, 2, 2)
imagesc(I3);
axis square;
colormap gray;
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
---------------------
转自:http://cs.brown.edu/courses/cs129/docs/matlab/matlabtutorialcode.html