作业第五天

 

r1
<Huawei>s
Nov 20 2022 22:29:47-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1
[r1]user-int    
[r1]user-interface con    
[r1]user-interface console 0
[r1-ui-console0]idle    
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add    
[r1-GigabitEthernet0/0/0]ip address 12.1.1.1 24
Nov 20 2022 22:31:06-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]quit
[r1]int    
[r1]interface Loop    
[r1]interface LoopBack 0
[r1-LoopBack0]ip add    
[r1-LoopBack0]ip address 1.1.1.1 32
[r1-LoopBack0]quit
[r1]rip 1
[r1-rip-1]ver    
[r1-rip-1]verify-source
[r1-rip-1]version 2
[r1-rip-1]net    
[r1-rip-1]network 12.0.0.0
[r1-rip-1]def    
[r1-rip-1]default-rou    
[r1-rip-1]default-route ori    
[r1-rip-1]default-route originate
[r1-rip-1]quit
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]rip au    
[r1-GigabitEthernet0/0/0]rip authentication-mode sim    
[r1-GigabitEthernet0/0/0]rip authentication-mode simple cip    
[r1-GigabitEthernet0/0/0]rip authentication-mode simple cipher 123
[r1-GigabitEthernet0/0/0]quit
[r1]rip 1
[r1-rip-1]tim    
[r1-rip-1]timers rip 15 90 90
[r1-rip-1]quit
[r1]pimg 192.168.1.1
    ^
Error: Unrecognized command found at '^' position.
[r1]pimg 192.168.1.1
    ^
Error: Unrecognized command found at '^' position.
[r1]ping 192.168.1.1
  PING 192.168.1.1: 56  data bytes, press CTRL_C to break
    Request time out
    Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=254 time=30 ms
    Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=254 time=20 ms
    Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=254 time=30 ms
    Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=254 time=30 ms

  --- 192.168.1.1 ping statistics ---
    5 packet(s) transmitted
    4 packet(s) received
    20.00% packet loss
    round-trip min/avg/max = 20/27/30 ms

[r1]ping 192.168.2.1
  PING 192.168.2.1: 56  data bytes, press CTRL_C to break
    Reply from 192.168.2.1: bytes=56 Sequence=1 ttl=254 time=40 ms
    Reply from 192.168.2.1: bytes=56 Sequence=2 ttl=254 time=40 ms
    Reply from 192.168.2.1: bytes=56 Sequence=3 ttl=254 time=20 ms
    Reply from 192.168.2.1: bytes=56 Sequence=4 ttl=254 time=30 ms
    Reply from 192.168.2.1: bytes=56 Sequence=5 ttl=254 time=20 ms

  --- 192.168.2.1 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/30/40 ms

r2
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]user-int    
[r2]user-interface con    
[r2]user-interface console 0
[r2-ui-console0]idle    
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]quit
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip add    
[r2-GigabitEthernet0/0/0]ip address 12.1.1.2 24
Nov 20 2022 22:33:53-08:00 r2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add    
[r2-GigabitEthernet0/0/1]ip address 23.1.1.1 24
Nov 20 2022 22:34:12-08:00 r2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]quit
[r2]int LOOp    
[r2]int
        ^
Error:Incomplete command found at '^' position.
[r2]int    
[r2]interface Loop
                   ^
Error:Incomplete command found at '^' position.
[r2]interface Loop    
[r2]interface LoopBack 0
[r2-LoopBack0]ip add    
[r2-LoopBack0]ip address 2.2.2.2 32
[r2-LoopBack0]quit
[r2]rip
[r2-rip-1]ver    
[r2-rip-1]verify-source
[r2-rip-1]version 2
[r2-rip-1]net    
[r2-rip-1]network 12.0.0.0
[r2-rip-1]net    
[r2-rip-1]network 23.0.0.0
[r2-rip-1]net    
[r2-rip-1]network 2.0.0.0
[r2-rip-1]quit
[r2]rip au    
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]rip au    
[r2-GigabitEthernet0/0/0]rip authentication-mode sim    
[r2-GigabitEthernet0/0/0]rip authentication-mode simple cip    
[r2-GigabitEthernet0/0/0]rip authentication-mode simple cipher 123
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]rip au    
[r2-GigabitEthernet0/0/1]rip authentication-mode md5 us    
[r2-GigabitEthernet0/0/1]rip authentication-mode md5 usual cip    
[r2-GigabitEthernet0/0/1]rip authentication-mode md5 usual cipher 123
[r2-GigabitEthernet0/0/1]quit
[r2]rip 1
[r2-rip-1]timers rip 15 90 90

r3
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname r3
[r3]user-int    
[r3]user-interface con    
[r3]user-interface console 0
[r3-ui-console0]idle    
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]quit
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add    
[r3-GigabitEthernet0/0/0]ip address 23.1.1.2 24
Nov 20 2022 22:36:34-08:00 r3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add    
[r3-GigabitEthernet0/0/1]ip address 34.1.1.1 24
Nov 20 2022 22:36:56-08:00 r3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]quit
[r3]int    
[r3]interface Loop
                   ^
Error:Incomplete command found at '^' position.
[r3]interface Loop    
[r3]interface LoopBack 0
[r3-LoopBack0]ip add    
[r3-LoopBack0]ip address 192.168.1.1 24
[r3-LoopBack0]quit
[r3]int    
[r3]interface Loop    
[r3]interface LoopBack 1
[r3-LoopBack1]ip add    
[r3-LoopBack1]ip address 192.168.2.1 24
[r3-LoopBack1]quit
[r3]rip 1
[r3-rip-1]ver    
[r3-rip-1]verify-source`    
[r3-rip-1]verify-source    
[r3-rip-1]ver    
[r3-rip-1]version 2
[r3-rip-1]net    
[r3-rip-1]network 23.0.0.0
[r3-rip-1]net    
[r3-rip-1]network 34.0.0.0
[r3-rip-1]net    
[r3-rip-1]network 192.168.1.0
[r3-rip-1]net    
[r3-rip-1]network 192.168.2.0
[r3-rip-1]quit
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]rip au    
[r3-GigabitEthernet0/0/0]rip authentication-mode md5 us    
[r3-GigabitEthernet0/0/0]rip authentication-mode md5 usual cip    
[r3-GigabitEthernet0/0/0]rip authentication-mode md5 usual cipher 123
[r3-GigabitEthernet0/0/0]quit
[r3]rip 1
[r3-rip-1]timers rip 15 90 90
[r3-rip-1]quit
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]rip sum    
[r3-GigabitEthernet0/0/0]rip summary-address 192.168.0.0 255.255.252.0
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]rip sum    
[r3-GigabitEthernet0/0/1]rip summary-address 192.168.0.0 255.255.252.0
[r3-GigabitEthernet0/0/1]

r4
The device is running!
########
<Huawei>
Nov 20 2022 22:29:52-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname r4
[r4]user-    
[r4]user-int    
[r4]user-interface con    
[r4]user-interface console 0
[r4-ui-console0]idle    
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]quit
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]
[r4-GigabitEthernet0/0/0]ip add    
[r4-GigabitEthernet0/0/0]ip address 34.1.1.2 24
Nov 20 2022 22:39:34-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]quit
[r4]int    
[r4]interface Loop    
[r4]interface LoopBack 0
[r4-LoopBack0]ip add    
[r4-LoopBack0]ip address 4.4.4.4 32
[r4-LoopBack0]quit
[r4]rip 1
[r4-rip-1]ver    
[r4-rip-1]verify-source
[r4-rip-1]version 2
[r4-rip-1]net    
[r4-rip-1]network 34.0.0.0
[r4-rip-1]net    
[r4-rip-1]network 4.0.0.0
[r4-rip-1]quit
[r4]dis    
[r4]display ip     
[r4]display ip rou    
[r4]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 13       Routes : 13       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        2.2.2.2/32  RIP     100  2           D   34.1.1.1        GigabitEthernet
0/0/0
        4.4.4.4/32  Direct  0    0           D   127.0.0.1       LoopBack0
       12.1.1.0/24  RIP     100  2           D   34.1.1.1        GigabitEthernet
0/0/0
       23.1.1.0/24  RIP     100  1           D   34.1.1.1        GigabitEthernet
0/0/0
       34.1.1.0/24  Direct  0    0           D   34.1.1.2        GigabitEthernet
0/0/0
       34.1.1.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
     34.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    192.168.1.0/24  RIP     100  1           D   34.1.1.1        GigabitEthernet
0/0/0
    192.168.2.0/24  RIP     100  1           D   34.1.1.1        GigabitEthernet
0/0/0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r4]dis    
[r4]display ip rou    
[r4]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 14       Routes : 14       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        0.0.0.0/0   RIP     100  3           D   34.1.1.1        GigabitEthernet
0/0/0
        2.2.2.2/32  RIP     100  2           D   34.1.1.1        GigabitEthernet
0/0/0
        4.4.4.4/32  Direct  0    0           D   127.0.0.1       LoopBack0
       12.1.1.0/24  RIP     100  2           D   34.1.1.1        GigabitEthernet
0/0/0
       23.1.1.0/24  RIP     100  1           D   34.1.1.1        GigabitEthernet
0/0/0
       34.1.1.0/24  Direct  0    0           D   34.1.1.2        GigabitEthernet
0/0/0
       34.1.1.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
     34.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    192.168.1.0/24  RIP     100  1           D   34.1.1.1        GigabitEthernet
0/0/0
    192.168.2.0/24  RIP     100  1           D   34.1.1.1        GigabitEthernet
0/0/0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r4]rip 1
[r4-rip-1]timers rip 15 90 90