vlan实验

 

根据题干将PC1 3划为VLAN 2，PC2划为VLAN3，PC4划为VLAN4 ，PC5划为VLAN5  ，PC6划为VLAN6按条件1将PC1 PC3所在接口配置为access，PVID为vlan 2，PC2所在接口通过VLAN 3 to 6，PC4通过  VLAN 1 to 4，PC5通过VLAN 3 to 5，PC6通过VLAN 3、6

 配置交换机

[SW1]vlan batch 2 to 6
[SW1]int eth 0/0/2
[SW1-Ethernet0/0/2]port link-type access
[SW1-Ethernet0/0/2]port default vlan 2
[SW1-Ethernet0/0/2]int eth 0/0/4
[SW1-Ethernet0/0/4]port link-type access
[SW1-Ethernet0/0/4]port default vlan 2
[SW1]int eth0/0/3
[SW1-Ethernet0/0/3]port hybrid untagged vlan 3 to 6
[SW1-Ethernet0/0/3]port hybrid pvid vlan 3
[SW1-Ethernet0/0/3]int eth0/0/5
[SW1-Ethernet0/0/5]port hybrid pvid vlan 4    
[SW1-Ethernet0/0/5]port hybrid untagged vlan 1 to 4
[SW1]int eth0/0/6    
[SW1-Ethernet0/0/6]port link-type trunk 
[SW1-Ethernet0/0/6]port trunk allow-pass vlan 2 to 6
[SW1-Ethernet0/0/6]int eth0/0/1
[SW1-Ethernet0/0/1]port hybrid tagged vlan 2    
[SW1-Ethernet0/0/1]port hybrid untagged vlan 3 to 6 

[SW2]vlan batch 2 to 6
[SW2]int eth0/0/1    
[SW2-Ethernet0/0/1]port hybrid pvid vlan 5
[SW2-Ethernet0/0/1]port hybrid untagged vlan 3 to 5
[SW2-Ethernet0/0/1]int eth0/0/2    
[SW2-Ethernet0/0/2]port hybrid pvid vlan 6
[SW2-Ethernet0/0/2]port hybrid untagged vlan 3 6
[SW2]int eth0/0/3
[SW2-Ethernet0/0/3]port link-type trunk 
[SW2-Ethernet0/0/3]port trunk allow-pass vlan 2 to 6

配置路由器

[r1]int g0/0/1
[r1-GigabitEthernet0/0/1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.2.1 24
 
[r1-GigabitEthernet0/0/0]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2    
[r1-GigabitEthernet0/0/0.1]ip add 192.168.1.1 24
 
6.在R1上开启DHCP服务建立池塘配置
[r1]ip pool v2    
[r1-ip-pool-v2]network 192.168.1.0 mask 24
[r1-ip-pool-v2]gateway-list 192.168.1.1
[r1-ip-pool-v2]q
[r1]ip pool v3-6
[r1-ip-pool-v3-6]network 192.168.2.0 mask 24
[r1-ip-pool-v3-6]gateway-list 192.168.2.1
[r1]dhcp enlab
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]dhcp select global 
[r1-GigabitEthernet0/0/0]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dhcp select global
验证