STM32之STM32F373 DAC调试记录

有了之前调试SDADC的经历，我对ST的官方例程是无比相信的，然后这次在调试DAC按照它的配置怎么也输出不了波形，然后没办法，翻Reference manual，看能否找出蛛丝马迹；

DAC的那节没看出毛病，该配置的也配置了；
然后锁定到DMA，官方例程用的是DMA2；

**DAC channel 1对应的 DMA2通道Channel3；
DAC channel 2对应的 DMA2通道Channel4；**

而官方例程上，正好反过来了，改过来波形就发出来了；

          /* The sine wave and the escalator wave has been selected */
          /* Sine Wave generator ---------------------------------------------*/

          /* DAC channel2 Configuration */
          DAC_DeInit(DAC1); 
          DAC_InitStructure.DAC_Trigger = DAC_Trigger_T2_TRGO;
          DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
          DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;

          /* DAC Channel2 Init */
          DAC_Init(DAC1, DAC_Channel_2, &DAC_InitStructure);

          /* Enable DAC Channel2 */
          DAC_Cmd(DAC1, DAC_Channel_2, ENABLE);

          /* DMA2 channel3 configuration */
          DMA_DeInit(DMA2_Channel3); 
          DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR12R2_ADDRESS;
          DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&Sine12bit;
          DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
          DMA_InitStructure.DMA_BufferSize = 32;
          DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
          DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
          DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
          DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
          DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
          DMA_InitStructure.DMA_Priority = DMA_Priority_High;
          DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
          DMA_Init(DMA2_Channel3, &DMA_InitStructure);

          ****/* Enable DMA2 Channel3 */
          DMA_Cmd(DMA2_Channel3, ENABLE);
          /* Enable DMA for DAC Channel2 */
          DAC_DMACmd(DAC1, DAC_Channel_2, ENABLE);****

          /* Escalator Wave generator ----------------------------------------*/

          /* DAC channel1 Configuration */
          DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
          DAC_Init(DAC1, DAC_Channel_1, &DAC_InitStructure);

          /* DMA2 channel4 configuration */
          DMA_DeInit(DMA2_Channel4);
          DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR8R1_ADDRESS;
          DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&Escalator8bit;
          DMA_InitStructure.DMA_BufferSize = 6;
          DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
          DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
          DMA_Init(DMA2_Channel4, &DMA_InitStructure);

          /* Enable DMA2 Channel4 */
          DMA_Cmd(DMA2_Channel4, ENABLE);

          /* Enable DAC1 Channel1: Once the DAC1 channel1 is enabled, PA.05 is 
             automatically connected to the DAC converter. */
          DAC_Cmd(DAC1, DAC_Channel_1, ENABLE);

          /* Enable DMA for DAC Channel1 */
          DAC_DMACmd(DAC1, DAC_Channel_1, ENABLE);

截止到现在，这个错误还没被更正，在这里不知道会不会被他们看到；