PRVE-0474 : Berkeley Packet Filter Devices do not Exist Under directory /dev on Nodes "Node1" (文档 ID

APPLIES TO:

Oracle Database - Enterprise Edition - Version 12.1.0.2 and later
IBM AIX on POWER Systems (64-bit)

SYMPTOMS

Trying to install Oracle Grid Infrastructure 12.1.02 , while running runcluvfy tool shows following errors:

Starting check for Berkeley Packet Filter devices /dev/bpf* existence and validation check ...

ERROR:

PRVE-0474 : Berkeley Packet Filter devices do not exist under directory /dev on nodes "Node2".
PRVE-0474 : Berkeley Packet Filter devices do not exist under directory /dev on nodes "Node1".

Check for Berkeley Packet Filter devices /dev/bpf* existence and validation check failed

Pre-check for cluster services setup was unsuccessful on all the nodes.

 

CAUSE

Berkeley Packet Filter devices /dev/bpf* does not exist on system. Oracle use ioctl command to access bpf devices, you can review IBM website here for the type of operations:

http://www-01.ibm.com/support/knowledgecenter/ssw_aix_61/com.ibm.aix.commtrf2/ioctl_BPF_control_operations.htm

SOLUTION

Check /dev/bpf* device exist on system

# ls -lart /dev/bpf*

If no device exist , execute below command as root user.

# /usr/sbin/tcpdump -D

Now verify  /dev/bpf* device should exist

# ls -lart /dev/bpf*

 Now re-run the runcluvfy.sh , issue will be resolved.

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
17:07:28.846]收←◆CPU0.Hello World# ISP code version: b12ddbf0-dirty Build time: May 5 2023 16:43:39 CPU1.UP: [17:07:28.878]收←◆[CPU0] [ispv4]enable pmic of all modules OK [CPU0] [ispv4]enable pmu of all modules OK [CPU0] [ispv4]ddr_bringup_power: ddr_bringup_power start [17:07:29.052]收←◆[CPU0] [ispv4]ddr_boot_proc: ddr total boot time 10622640(ns) [CPU0] [ispv4]ddr_regulator_info: name default_uv cur_uv step use_cnt open_cnt [CPU0] [ispv4]ddr_regulator_info: -------------------------------------------------------------------------- [CPU0] [ispv4]ddr_regulator_info: ddr_vdd 750000 750000 25000 1 2 [CPU0] [ispv4]ddr_regulator_info: ddrphy_vdd1 1800000 1800000 50000 1 2 [CPU0] [ispv4]ddr_regulator_info: ddrphy_vdd2 1120000 1120000 5000 1 3 [CPU0] [ispv4]ddr_regulator_info: ddrphy_vddq 612500 612500 12500 1 2 [CPU0] [ispv4]ddr_info_show: [vendor info] 0x6 [tar freq id] 0x0 [cur freq] 4266 [CPU0] [ispv4]ddr_boot_proc: ddr rw test passed [CPU0] [ispv4]ddr_boot_proc: ddr quick boot passed! [CPU0] [ispv4]ddr_temp_intr_reg: [ddr_temp_intr_reg] proc succ. [[CPU0] [ispv4]Wait FW1 load (timeout=1500.000ms)... CPU0] [ispv4]Wait FW1 load[CPU0] [ispv4]mbox received 15 0 0 1 [CPU0] [ispv4]FW1 load finish. [CPU0] [ispv4]Check DRAM flag pass [CPU0] [ispv4]Boot source: 1 [CPU0] [ispv4]FW load interface: 1 [CPU0] [ispv4][2STAGE_BOOT]clear bss in DRAM(s=0x800 e(2t7idm0e,oeu=t0=x18500100.4030004m,ss)i.z.e.=0x 2[1CbP3U40)] [is[CpPvU40]]m b[oixs prve4c]eNiov ende e1d5 t0o 0s e1nd t[rCaPiUn0i]n g[ idsaptva4.] FW1 load finish[CPU0] [ispv4.]Bo o[tCPU0] [ispv4]Check DRAM flag pass [CPU0] [ispv4]Boot source: 1 [CPU0] [ispv4]FW load interface:t 1 [CPU0] [ispvi4m]e[:2 S1T9A3G3E1_3BuOsO T]clear bss in DRAM(s=0x800e27d0,e=0x80104304,size=0x21b34) [CPU0] [ispv4]No need to send training data. [CPU0] [ispv4]BooMAX TIME:SW IRQ-0(0) PPL-0(0x0) tALGO MAX TIME: FESOF: fe 0.000 ms, be 0.000 ms, FEEOF 0.000 ms, BEEOF 0.000 ms time: 193313us NuttShell (NSH) NuttX-10.1.0 ispv4>  [17:07:29.455]收←◆ 0.147388|CPU0|I|hwl.bwadj| ###isp_device_init: initialize all isp devices 0.147431|CPU0|I|hwl.extd|###ext_device_init: initialize all isp ext devices
06-09

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值