ESP8266 RTOS 串口发送与接收

1.串口配置

2.读取接收数据并发送出去

#define BUF_SIZE (1024)

static void echo_task()
{
    // Configure parameters of an UART driver,
    // communication pins and install the driver
    uart_config_t uart_config =
    {
        .baud_rate = 74880,
        .data_bits = UART_DATA_8_BITS,
        .parity    = UART_PARITY_DISABLE,
        .stop_bits = UART_STOP_BITS_1,
        .flow_ctrl = UART_HW_FLOWCTRL_DISABLE
    };
    uart_param_config(UART_NUM_0, &uart_config);
    uart_driver_install(UART_NUM_0, BUF_SIZE * 2, 0, 0, NULL, 0);

    // Configure a temporary buffer for the incoming data
    uint8_t *data = (uint8_t *) malloc(BUF_SIZE);

    while (1)
    {
        // Read data from the UART
        int len = uart_read_bytes(UART_NUM_0, data, BUF_SIZE, 20 / portTICK_RATE_MS);
        // Write data back to the UART
        uart_write_bytes(UART_NUM_0, (const char *) data, len);
    }
}