【锐捷】交换机，AC设备虚拟化（VSU、VAC）

CyclingLife

已于 2023-04-13 08:37:38 修改

阅读量1.9w

点赞数 5

分类专栏：网络锐捷文章标签：网络

于 2022-07-04 10:45:58 首次发布

本文链接：https://blog.csdn.net/qq_24122661/article/details/125595272

版权

网络同时被 2 个专栏收录

30 篇文章 11 订阅

订阅专栏

锐捷

28 篇文章 25 订阅

订阅专栏

一、交换机虚拟化（VSU）

1、物理线路连接（盒式交换机一般只能使用SFP+接口建立VSU）

2.配置VSU参数

第一台交换机：
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#switch virtual domain 1
Ruijie(config-vs-domain)#switch 1
Ruijie(config-vs-domain)#switch 1 priority 150
Ruijie(config-vs-domain)#switch 1 description Switch-1
Ruijie(config-vs-domain)#exit
Ruijie(config)#vsl-port 
Ruijie(config-vsl-port)#port-member interface tenGigabitEthernet 0/49
Ruijie(config-vsl-port)#end
Ruijie#switch convert mode virtual
Convert mode will backup and delete config file, and reload the switch. Are you sure to continue[yes/no]:y

第二台交换机：
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#switch virtual domain 1
Ruijie(config-vs-domain)#switch 2
Ruijie(config-vs-domain)#switch 2 priority 120
Ruijie(config-vs-domain)#switch 2 description Switch-2
Ruijie(config-vs-domain)#exit
Ruijie(config)#vsl-port 
Ruijie(config-vsl-port)#port-member interface tenGigabitEthernet 0/49
Ruijie(config-vsl-port)#end
Ruijie#switch convert mode virtual
Convert mode will backup and delete config file, and reload the switch. Are you sure to continue[yes/no]:y

等待交换机重启，成功建立VSU后，开始配置BFD双机检测

Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#interface range gigabitEthernet 1/0/48,2/0/48
Ruijie(config-if-range)#no switchport
Ruijie(config-if-range)#exit
Ruijie(config)#switch virtual domain 1
Ruijie(config-vs-domain)#dual-active bfd interface gigabitEthernet 1/0/48
Ruijie(config-vs-domain)#dual-active bfd interface gigabitEthernet 2/0/48
Ruijie(config-vs-domain)#end
Ruijie#write

VSU配置完成

二、AC虚拟化（VAC）

1、物理线路连接（盒式AC可使用千兆RJ45电口或SFP光口建立VAC）

2.配置VSU参数

第一台AC：
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#virtual-ac domain 1
Ruijie(config-vac-domain)#device 1
Ruijie(config-vac-domain)#device 1 priority 150
Ruijie(config-vac-domain)#device 1 description AC-1
Ruijie(config-vac-domain)#exit
Ruijie(config)#vac-port 
Ruijie(config-vac-port)#port-member interface GigabitEthernet 0/2 copper
Ruijie(config-vac-port)#end
Ruijie#device convert mode virtual
Convert mode will backup and delete config file, and reload the switch. Are you sure to continue[yes/no]:y

第一台AC：
Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#virtual-ac domain 1
Ruijie(config-vac-domain)#device 2
Ruijie(config-vac-domain)#device 2 priority 120
Ruijie(config-vac-domain)#device 2 description AC-2
Ruijie(config-vac-domain)#exit
Ruijie(config)#vac-port 
Ruijie(config-vac-port)#port-member interface GigabitEthernet 0/2 copper
Ruijie(config-vac-port)#end
Ruijie#device convert mode virtual
Convert mode will backup and delete config file, and reload the switch. Are you sure to continue[yes/no]:y

等待AC重启，成功建立VAC后，开始配置BFD双机检测

Ruijie>enable
Ruijie#configure terminal
Ruijie(config)#interface range gigabitEthernet 1/0/3,2/0/3
Ruijie(config-if-range)#no switchport
Ruijie(config-if-range)#exit
Ruijie(config)#virtual-ac domain 1
Ruijie(config-vac-domain)#dual-active bfd interface gigabitEthernet 1/0/3
Ruijie(config-vac-domain)#dual-active bfd interface gigabitEthernet 2/0/3
Ruijie(config-vs-domain)#end
Ruijie#write

VAC配置完成