MTK平台唤醒源分类

SPM R12寄存器记录MCU的唤醒源，MCU被唤醒时log中会将具体唤醒源打印：

#define R12_PCM_TIMER_EVENT                   (1U << 0) ----> SPM 定时器唤醒，基本不会有，只有当系统没有其他唤醒源时，超过1h，才会有此timer唤醒，可以理解为SPM 里面的看门狗
#define R12_SPM_TWAM_IRQ_B                    (1U << 1) ----> SPM 用来debug的中断，不会有
#define R12_KP_IRQ_B                          (1U << 2) ----> 按键中断
#define R12_APWDT_EVENT_B                     (1U << 3) ----> AP侧的WDT(看门狗)中断
#define R12_APXGPT1_EVENT_B                   (1U << 4) ----> APXGPT，这个是system timer，对应到软件的hrtimer，只有在idle时才有
#define R12_CONN2AP_SPM_WAKEUP_B              (1U << 5) ----> CONN，WCN的中断，wifi/BT/GPS/FM的唤醒
#define R12_EINT_EVENT_B                      (1U << 6) ----> 外部中断唤醒，譬如PMIC EINT，这类唤醒比较常见
#define R12_CONN_WDT_IRQ_B                    (1U << 7) ----> CONN的WDT(看门狗)中断
#define R12_CCIF0_EVENT_B                     (1U << 8) ----> Modem的CCIF0唤醒，譬如，网络唤醒，网络URC唤醒，这类唤醒比较常见
#define R12_LOWBATTERY_IRQ_B                  (1U << 9) ----> 低电池唤醒，基本没有
#define R12_SC_SSPM2SPM_WAKEUP                (1U << 10) ----> SSPM唤醒，基本没有
#define R12_SC_SCP2SPM_WAKEUP                 (1U << 11) ----> sensor hub唤醒
#define R12_SC_ADSP2SPM_WAKEUP                (1U << 12) ----> ADSP 也就是audio之类的唤醒，基本没有
#define R12_PCM_WDT_EVENT_B                   (1U << 13) ---->跟1是类似
#define R12_USBX_CDSC_B                       (1U << 14) ---->USB 唤醒
#define R12_USBX_POWERDWN_B                   (1U << 15) ---->USB 唤醒
#define R12_SYS_TIMER_EVENT_B                 (1U << 16) ---->跟4类似
#define R12_EINT_EVENT_SECURE_B               (1U << 17) ---->跟 SECURE EINT唤醒
#define R12_CCIF1_EVENT_B                     (1U << 18) ---->跟8类似
#define R12_UART0_IRQ_B                       (1U << 19) ---->uart 0唤醒
#define R12_AFE_IRQ_MCU_B                     (1U << 20) ---->AFE，audio相关的唤醒
#define R12_THERMAL_CTRL_EVENT_B              (1U << 21) ---->Thermal的唤醒
#define R12_SYS_CIRQ_IRQ_B                    (1U << 22) ----> CIRQ的唤醒，系统休眠时会将GIC backup到CIRQ
#define R12_MD2AP_PEER_WAKEUP_EVENT           (1U << 23) ----> 数据业务唤醒
#define R12_CSYSPWREQ_B                       (1U << 24) ----> debug用
#define R12_MD1_WDT_B                         (1U << 25) ----> Modem的WDT(看门狗)唤醒
#define R12_AP2AP_PEER_WAKEUP_EVENT           (1U << 26) ----> 数据业务唤醒
#define R12_SEJ_EVENT_B                       (1U << 27) ----> SEJ模块唤醒
#define R12_SPM_CPU_WAKEUP_EVENT              (1U << 28) ----> CPU唤醒
#define R12_CPU_IRQOUT                        (1U << 29) ----> CPU唤醒
#define R12_CPU_WFI                           (1U << 30) ----> CPU唤醒
#define R12_MCUSYS_IDLE_TO_EMI_ALL            (1U << 31) ----> CPU唤醒