配置手动模式的链路聚合

1、配置基础：交换机S1和S2名称、关闭接口的自协商功能、接口速率设为100Mbit/s

<Huawei>system-view
[Huawei]sysname S1
[S1]interface g0/0/9
[S1-GigabitEthernet0/0/9]undo negotiation auto 
[S1-GigabitEthernet0/0/9]speed 100
[S1-GigabitEthernet0/0/9]q
[S1]interface g0/0/10
[S1-GigabitEthernet0/0/10]undo negotiation auto
[S1-GigabitEthernet0/0/10]speed 100
[S1-GigabitEthernet0/0/10]q
[S1]

S2同理

2、验证S1和S2的G0/0/9和G0/0/10接口速率配置成功

3、配置手动模式的链路聚合

[S1]
[S1]int eth 1
[S1-Eth-Trunk1]trunkport GigabitEthernet 0/0/9
[S1-Eth-Trunk1]trunkport GigabitEthernet 0/0/10
[S1-Eth-Trunk1]q
[S1]dis etn t	
[S1]dis etn t1
Error: Unrecognized command found at '^' position.
[S1]dis eth t1
            ^
Error: Wrong parameter found at '^' position.
[S1]dis eth
Eth-Trunk1's state information is:
WorkingMode: NORMAL         Hash arithmetic: According to SIP-XOR-DIP         
Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              
Operate status: up          Number Of Up Port In Trunk: 2                     
--------------------------------------------------------------------------------
PortName                      Status      Weight 
GigabitEthernet0/0/9          Up          1      
GigabitEthernet0/0/10         Up          1    

S2同理；

或进入接口后加入链路聚合组

验证eth-trunk的配置结果

[S1]dis eth-trunk 1