nginx 基本使用
更多干货
概述
nginx 的安装
下载地址: http://nginx.org/download/nginx-1.4.2.tar.gz
安装准备: nginx依赖于pcre库,要先安装pcre
yum install pcre pcre-devel
cd /usr/local/src/
wget http://nginx.org/download/nginx-1.4.2.tar.gz
tar zxvf nginx-1.4.2.tar.gz
cd nginx-1.4.2
./configure --prefix=/usr/local/nginx
make && make install
启动:
cd /ulsr/local/nginx, 看到如下4个目录
./
....conf 配置文件
... html 网页文件
...logs 日志文件
...sbin 主要二进制程序
[root@localhost nginx]# ./sbin/nginx
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
....
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
nginx: [emerg] still could not bind()
不能绑定80端口,80端口已经被占用
(有时是自己装了apache,nginx等,还有更多情况是操作系统自带了apache并作为服务启动)
解决: 把占用80端口的软件或服务关闭即可.
Nginx的信号控制
具体语法:
Kill -信号选项 nginx的主进程号
Kill -HUP 4873
Kill -信号控制 `cat /xxx/path/log/nginx.pid`
Kil; -USR1 `cat /xxx/path/log/nginx.pid`
Nginx配置段
// 全局区
worker_processes 1; // 有1个工作的子进程,可以自行修改,但太大无益,因为要争夺CPU,一般设置为 CPU数*核数
Event {
// 一般是配置nginx连接的特性
// 如1个word能同时允许多少连接
worker_connections 1024; // 这是指 一个子进程最大允许连1024个连接
}
http { //这是配置http服务器的主要段
Server1 { // 这是虚拟主机段
Location { //定位,把特殊的路径或文件再次定位 ,如image目录单独处理
} /// 如.php单独处理
}
Server2 {
}
}
例子1: 基于域名的虚拟主机
```
server {
listen 80; #监听端口
server_name a.com; #监听域名
location / {
root /var/www/a.com; #根目录定位
index index.html;
}
}
```
例子2: 基于端口的虚拟主机配置
server {
listen 8080;
server_name 192.168.1.204;
location / {
root /var/www/html8080;
index index.html;
}
}
日志管理
我们观察nginx的server段,可以看到如下类似信息
#access_log logs/host.access.log main;
这说明 该server, 它的访问日志的文件是 logs/host.access.log ,
使用的格式”main”格式.
除了main格式,你可以自定义其他格式.
main格式是什么?
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
main格式是我们定义好一种日志的格式,并起个名字,便于引用.
以上面的例子, main类型的日志,记录的 remote_addr…. http_x_forwarded_for等选项.
1: 日志格式 是指记录哪些选项
默认的日志格式: main
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
如默认的main日志格式,记录这么几项
远程IP- 远程用户/用户时间 请求方法(如GET/POST) 请求体body长度 referer来源信息
http-user-agent用户代理/蜘蛛 ,被转发的请求的原始IP
http_x_forwarded_for:在经过代理时,代理把你的本来IP加在此头信息中,传输你的原始IP
2: 声明一个独特的log_format并命名
log_format mylog '$remote_addr- "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
在下面的server/location,我们就可以引用 mylog
在server段中,这样来声明
Nginx允许针对不同的server做不同的Log ,(有的web服务器不支持,如lighttp)
access_log logs/access_8080.log mylog;
声明log log位置 log格式;
实际应用: shell+定时任务+nginx信号管理,完成日志按日期存储
分析思路:
-
凌晨00:00:01,把昨天的日志重命名,放在相应的目录下
-
再USR1信息号控制nginx重新生成新的日志文件
具体脚本:
#!/bin/bash
base_path='/usr/local/nginx/logs'
log_path=$(date -d yesterday +"%Y%m")
day=$(date -d yesterday +"%d")
mkdir -p $base_path/$log_path
mv $base_path/access.log $base_path/$log_path/access_$day.log
#echo $base_path/$log_path/access_$day.log
kill -USR1 `cat /usr/local/nginx/logs/nginx.pid`
定时任务
Crontab 编辑定时任务
01 00 * * * /xxx/path/b.sh 每天0时1分(建议在02-04点之间,系统负载小)
location 语法
location 有”定位”的意思, 根据Uri来进行不同的定位.
在虚拟主机的配置中,是必不可少的,location可以把网站的不同部分,定位到不同的处理方式上.比如, 碰到.php, 如何调用PHP解释器? --这时就需要location
location 的语法
location [=|~|~*|^~] patt {
}
中括号可以不写任何参数,此时称为一般匹配也可以写参数 因此,大类型可以分为3种
location = patt {} [精准匹配]
location patt{} [一般匹配]
location ~ patt{} [正则匹配]
如何发挥作用?: 首先看有没有精准匹配,如果有,则停止匹配过程.
location = patt {
config A
}
如果 $uri == patt,匹配成功,使用configA
location = / {
root /var/www/html/;
index index.htm index.html;
}
location / {
root /usr/local/nginx/html;
index index.html index.htm;
}
如果访问 http://xxx.com/
定位流程是
-
精准匹配中 ”/” ,得到index页为 index.htm
-
再次访问 /index.htm , 此次内部转跳uri已经是”/index.htm” , 根目录为/usr/local/nginx/html
-
最终结果,访问了 /usr/local/nginx/html/index.htm
再来看,正则也来参与.
location / {
root /usr/local/nginx/html;
index index.html index.htm;
}
location ~ image {
root /var/www/image;
index index.html;
}
-
如果我们访问 http://xx.com/image/logo.png
-
此时, “/” 与”/image/logo.png” 匹配
-
同时,”image”正则 与”image/logo.png”也能匹配,谁发挥作用?
-
正则表达式的成果将会使用.
图片真正会访问 /var/www/image/logo.png
location / {
root /usr/local/nginx/html;
index index.html index.htm;
}
location /foo {
root /var/www/html;
index index.html;
}
我们访问 http://xxx.com/foo 对于uri “/foo”, 两个location的patt,都能匹配他们 即 ‘/’能从左前缀匹配 ‘/foo’, ‘/foo’也能左前缀匹配’/foo’, 此时, 真正访问 /var/www/html/index.html 原因:’/foo’匹配的更长,因此使用之.;
rewrite 重写
if (条件) {} 设定条件,再进行重写
set #设置变量
return #返回状态码
break #跳出rewrite
rewrite #重写
If 语法格式
If 空格 (条件) {
重写模式
}
条件又怎么写?
答:3种写法
1: “=”来判断相等, 用于字符串比较
2: “~” 用正则来匹配(此处的正则区分大小写)
~* 不区分大小写的正则
3: -f -d -e来判断是否为文件,为目录,是否存在.
例子:
if ($remote_addr = 192.168.1.100) {
return 403;
}
if ($http_user_agent ~ MSIE) {
rewrite ^.*$ /ie.htm;
break; #(不break会循环重定向)
}
if (!-e $document_root$fastcgi_script_name) {
rewrite ^.*$ /404.html break;
}
注, 此处还要加break,
以 xx.com/dsafsd.html这个不存在页面为例, 我们观察访问日志, 日志中显示的访问路径,依然是GET /dsafsd.html HTTP/1.1 提示: 服务器内部的rewrite和302跳转不一样.
跳转的话URL都变了,变成重新http请求404.html, 而内部rewrite, 上下文没变, 就是说 fastcgi_script_name 仍然是 dsafsd.html,因此 会循环重定向.
set 是设置变量用的, 可以用来达到多条件判断时作标志用. 达到apache下的 rewrite_condition的效果
如下: 判断IE并重写,且不用break; 我们用set变量来达到目的
if ($http_user_agent ~* msie) {
set $isie 1;
}
if ($fastcgi_script_name = ie.html) {
set $isie 0;
}
if ($isie 1) {
rewrite ^.*$ ie.html;
}
Rewrite语法
Rewrite 正则表达式 定向后的位置 模式
Goods-3.html ---->Goods.php?goods_id=3
goods-([\d]+)\.html ---> goods.php?goods_id =$1
location /ecshop {
index index.php;
rewrite goods-([\d]+)\.html$ /ecshop/goods.php?id=$1;
rewrite article-([\d]+)\.html$ /ecshop/article.php?id=$1;
rewrite category-(\d+)-b(\d+)\.html /ecshop/category.php?id=$1&brand=$2;
rewrite category-(\d+)-b(\d+)-min(\d+)-max(\d+)-attr([\d\.]+)\.html /ecshop/category.php?id=$1&brand=$2&price_min=$3&price_max=$4&filter_attr=$5;
rewrite category-(\d+)-b(\d+)-min(\d+)-max(\d+)-attr([\d+\.])-(\d+)-([^-]+)-([^-]+)\.html /ecshop/category.php?id=$1&brand=$2&price_min=$3&price_max=$4&filter_attr=$5&page=$6&sort=$7&order=$8;
}
注意:用url重写时, 正则里如果有”{}”,正则要用双引号包起来