Android 8.0 RIL源码分析（一）

1.去电流程三中跟踪到最后的时候可以看到其调用了RIL的dail方法
这里继续以此分析其从RIL到Modem的流程

 @Override
    public void dial(String address, int clirMode, UUSInfo uusInfo, Message result) {
        //获取radio对象
        IRadio radioProxy = getRadioProxy(result);
        if (radioProxy != null) {
            //构建RIL请求消息
            RILRequest rr = obtainRequest(RIL_REQUEST_DIAL, result,
                    mRILDefaultWorkSource);

            Dial dialInfo = new Dial();
            dialInfo.address = convertNullToEmptyString(address);
            dialInfo.clir = clirMode;
            if (uusInfo != null) {
                UusInfo info = new UusInfo();
                info.uusType = uusInfo.getType();
                info.uusDcs = uusInfo.getDcs();
                info.uusData = new String(uusInfo.getUserData());
                dialInfo.uusInfo.add(info);
            }

            if (RILJ_LOGD) {
                // Do not log function arg for privacy
                riljLog(rr.serialString() + "> " + requestToString(rr.mRequest));
            }

            try {
                //调用dial方法
                radioProxy.dial(rr.mSerial, dialInfo);
            } catch (RemoteException | RuntimeException e) {
                handleRadioProxyExceptionForRR(rr, "dial", e);
            }
        }
    }

1.1使用单例模式通过获取Radio对象，可以看到其获取的是HIDL的对象，并且设置的回复方法mRadioResponse，可以参见RIL架构分析。

protected IRadio getRadioProxy(Message result) {
    ...
        try {
            //获取HIDL的服务并设置setResponseFunctions
            mRadioProxy = IRadio.getService(HIDL_SERVICE_NAME[mPhoneId == null ? 0 : mPhoneId]);
            if (mRadioProxy != null) {
                mRadioProxy.linkToDeath(mRadioProxyDeathRecipient,
                        mRadioProxyCookie.incrementAndGet());
                //设置mRadioResponse和mRadioIndication
                mRadioProxy.setResponseFunctions(mRadioResponse, mRadioIndication);
            } else {
                riljLoge("getRadioProxy: mRadioProxy == null");
            }
        } catch (RemoteException | RuntimeException e) {
            mRadioProxy = null;
            riljLoge("RadioProxy getService/setResponseFunctions: " + e);
        }
    ...
}

可以看到其通过HIDL方式获取到Radio对象后，进一步调用此对象的dial方法
继续查找远端的Radio类
发现RadioImpl继承了IRadio

struct RadioImpl : public V1_1::IRadio

2.在 ril_service 中实现了dial方法，继续跟进此方法

Return<void> RadioImpl::dial(int32_t serial, const Dial& dialInfo) {
#if VDBG
    RLOGD("dial: serial %d", serial);
#endif
    //构建请求对象，Event侧和reference测协定的统一格式,当从event测发送到reference测时需要标准化为此对象
    RequestInfo *pRI = android::addRequestToList(serial, mSlotId, RIL_REQUEST_DIAL);
    if (pRI == NULL) {
        return Void();
    }
    RIL_Dial dial = {};
    RIL_UUS_Info uusInfo = {};
    int32_t sizeOfDial = sizeof(dial);

    if (!copyHidlStringToRil(&dial.address, dialInfo.address, pRI)) {
        return Void();
    }
    dial.clir = (int) dialInfo.clir;

    if (dialInfo.uusInfo.size() != 0) {
        uusInfo.uusType = (RIL_UUS_Type) dialInfo.uusInfo[0].uusType;
        uusInfo.uusDcs = (RIL_UUS_DCS) dialInfo.uusInfo[0].uusDcs;

        if (dialInfo.uusInfo[0].uusData.size() == 0) {
            uusInfo.uusData = NULL;
            uusInfo.uusLength = 0;
        } else {
            if (!copyHidlStringToRil(&uusInfo.uusData, dialInfo.uusInfo[0].uusData, pRI)) {
                memsetAndFreeStrings(1, dial.address);
                return Void();
            }
            uusInfo.uusLength = dialInfo.uusInfo[0].uusData.size();
        }

        dial.uusInfo = &uusInfo;
    }
    //
    CALL_ONREQUEST(RIL_REQUEST_DIAL, &dial, sizeOfDial, pRI, mSlotId);

    memsetAndFreeStrings(2, dial.address, uusInfo.uusData);

    return Void();
}

疑问点:为何没有进入EventLoop循环？？？？
在Android7.0上是通过Select获取Socke发送过来的消息，然后通过EventLoop进行处理，最后调用到processCommandsCallback之后进行处理。和同事沟通后HIDL发送消息也会被Select获取到，之后一路调用到ev->func(ev->fd, 0, ev->param); ，但在8.0上没有processCommandsCallback处理，这里笔者也未追溯到其如何进一步处理，后续会进一步进行分析。但从现有源码来看其是调用到了RadioImpl的dial方法进行处理。

3.继续跟踪CALL_ONREQUEST
搜索CALL_ONREQUEST，可以看到其实际调用的是s_vendorFunctions->onRequest

#define CALL_ONREQUEST(a, b, c, d, e) s_vendorFunctions->onRequest((a), (b), (c), (d))

在registerService方法中看到s_vendorFunctions其实是传进来的callbacks实例，即RIL_RadioFunctions对象，这里具体分析可以见Android 8.0RIL框架分析。

在ril.c中继续跟踪OnRequest方法，回到之前rild.c的main中，我们看到其先调用rilInit进行初始化，之后返回了funcs,在传如RIL_register进行注册
跟进到reference-ril.c的 onRequest 方法

/**
 * Call from RIL to us to make a RIL_REQUEST
 *
 * Must be completed with a call to RIL_onRequestComplete()
 *
 * RIL_onRequestComplete() may be called from any thread, before or after
 * this function returns.
 *
 * Because onRequest function could be called from multiple different thread,
 * we must ensure that the underlying at_send_command_* function
 * is atomic.
 */
static void
onRequest (int request, void *data, size_t datalen, RIL_Token t)
{
    ATResponse *p_response;
    int err;

    RLOGD("onRequest: %s", requestToString(request));

    /* Ignore all requests except RIL_REQUEST_GET_SIM_STATUS
     * when RADIO_STATE_UNAVAILABLE.
     */
    if (sState == RADIO_STATE_UNAVAILABLE
        && request != RIL_REQUEST_GET_SIM_STATUS
    ) {
        RIL_onRequestComplete(t, RIL_E_RADIO_NOT_AVAILABLE, NULL, 0);
        return;
    }

    /* Ignore all non-power requests when RADIO_STATE_OFF
     * (except RIL_REQUEST_GET_SIM_STATUS)
     */
    if (sState == RADIO_STATE_OFF
        && !(request == RIL_REQUEST_RADIO_POWER
            || request == RIL_REQUEST_GET_SIM_STATUS)
    ) {
        RIL_onRequestComplete(t, RIL_E_RADIO_NOT_AVAILABLE, NULL, 0);
        return;
    }
    //可以看到只有两种情况是单独处理的，其他的在switch中处理
    switch (request) {
            ...
            case RIL_REQUEST_DIAL:
            requestDial(data, datalen, t);
            break;
            ...
        }
}

4.继续跟进requestDial方法

static void requestDial(void *data, size_t datalen __unused, RIL_Token t)
{
    RIL_Dial *p_dial;
    char *cmd;
    const char *clir;
    int ret;

    p_dial = (RIL_Dial *)data;

    switch (p_dial->clir) {
        case 1: clir = "I"; break;  /*invocation*/
        case 2: clir = "i"; break;  /*suppression*/
        default:
        case 0: clir = ""; break;   /*subscription default*/
    }

    asprintf(&cmd, "ATD%s%s;", p_dial->address, clir);
    //发送AT命令
    ret = at_send_command(cmd, NULL);

    free(cmd);

    /* success or failure is ignored by the upper layer here.
       it will call GET_CURRENT_CALLS and determine success that way */
    //结束时调用
    RIL_onRequestComplete(t, RIL_E_SUCCESS, NULL, 0);
}

5.继续跟踪at_send_command

int at_send_command (const char *command, ATResponse **pp_outResponse)
{
    int err;

    err = at_send_command_full (command, NO_RESULT, NULL,
                                    NULL, 0, pp_outResponse);

    return err;
}

6.继续跟进at_send_command_full

/**
 * Internal send_command implementation
 *
 * timeoutMsec == 0 means infinite timeout
 */
static int at_send_command_full (const char *command, ATCommandType type,
                    const char *responsePrefix, const char *smspdu,
                    long long timeoutMsec, ATResponse **pp_outResponse)
{
    int err;
    bool inEmulator;

    if (0 != pthread_equal(s_tid_reader, pthread_self())) {
        /* cannot be called from reader thread */
        return AT_ERROR_INVALID_THREAD;
    }
    inEmulator = isInEmulator();
    if (inEmulator) {
        pthread_mutex_lock(&s_writeMutex);
    }
    pthread_mutex_lock(&s_commandmutex);
    //继续发送
    err = at_send_command_full_nolock(command, type,
                    responsePrefix, smspdu,
                    timeoutMsec, pp_outResponse);

    pthread_mutex_unlock(&s_commandmutex);
    if (inEmulator) {
        pthread_mutex_unlock(&s_writeMutex);
    }

    if (err == AT_ERROR_TIMEOUT && s_onTimeout != NULL) {
        s_onTimeout();
    }

    return err;
}

7.继续跟进at_send_command_full_nolock

/**
 * Internal send_command implementation
 * Doesn't lock or call the timeout callback
 *
 * timeoutMsec == 0 means infinite timeout
 */

static int at_send_command_full_nolock (const char *command, ATCommandType type,
                    const char *responsePrefix, const char *smspdu,
                    long long timeoutMsec, ATResponse **pp_outResponse)
{
    int err = 0;
    struct timespec ts;

    if(sp_response != NULL) {
        err = AT_ERROR_COMMAND_PENDING;
        goto error;
    }
    //给modem发送AT消息
    err = writeline (command);

    if (err < 0) {
        goto error;
    }

    s_type = type;
    s_responsePrefix = responsePrefix;
    s_smsPDU = smspdu;

    //创建sp_respose作为回应
    sp_response = at_response_new();

    if (timeoutMsec != 0) {
        setTimespecRelative(&ts, timeoutMsec);
    }
    //发送完后阻塞线程
    while (sp_response->finalResponse == NULL && s_readerClosed == 0) {
        if (timeoutMsec != 0) {
            //进入阻塞状态，待另一个线程满足s_commandcond后解除
            err = pthread_cond_timedwait(&s_commandcond, &s_commandmutex, &ts);
        } else {
            err = pthread_cond_wait(&s_commandcond, &s_commandmutex);
        }
        //超时结束
        if (err == ETIMEDOUT) {
            err = AT_ERROR_TIMEOUT;
            goto error;
        }
    }

    if (pp_outResponse == NULL) {
        at_response_free(sp_response);
    } else {
        /* line reader stores intermediate responses in reverse order */
        reverseIntermediates(sp_response);
        //将回应发给请求的线程
        *pp_outResponse = sp_response;
    }

    sp_response = NULL;

    if(s_readerClosed > 0) {
        err = AT_ERROR_CHANNEL_CLOSED;
        goto error;
    }

    err = 0;
error:
    clearPendingCommand();

    return err;
}

可以看到这里做了两个重要的操作：
1.通过writeLine发送数据给modem
2.阻塞当前线程等待modem回应

8.这样数据就发送到了modem了

/**
 * Sends string s to the radio with a \r appended.
 * Returns AT_ERROR_* on error, 0 on success
 *
 * This function exists because as of writing, android libc does not
 * have buffered stdio.
 */
static int writeline (const char *s)
{
    size_t cur = 0;
    size_t len = strlen(s);
    ssize_t written;

    if (s_fd < 0 || s_readerClosed > 0) {
        return AT_ERROR_CHANNEL_CLOSED;
    }
    //AT命令的打印
    RLOGD("AT> %s\n", s);

    AT_DUMP( ">> ", s, strlen(s) );

    /* the main string */
    while (cur < len) {
        do {
            s_fd是modem和rilc的串口
            written = write (s_fd, s + cur, len - cur);
        } while (written < 0 && errno == EINTR);

        if (written < 0) {
            return AT_ERROR_GENERIC;
        }

        cur += written;
    }

    /* the \r  */
    //以r结尾
    do {
        written = write (s_fd, "\r" , 1);
    } while ((written < 0 && errno == EINTR) || (written == 0));

    if (written < 0) {
        return AT_ERROR_GENERIC;
    }

    return 0;
}

本文参考了以下博客
http://blog.csdn.net/u010961631/article/details/9446377