mini2440通过nfs挂载linux文件夹

linux

1.安装nfs服务器

sudo apt-get install nfs-kernel-server

2.修改配置文件/etc/exports

vim /etc/exports

在最后一行加上

/home/stu/nfs *(rw,sync,no_root_squash,no_subtree_check)

其中/home/stu/nfs是你要挂载的目录

3.端口映射

sudo service rpcbind restart

4.重启

sudo service nfs-kernel-server restart

5.测试

showmount -e

mini2440

mount -t nfs -o nolock 192.168.0.102:/home/stu/nfs /mnt

要传送比较大的文件时用这个命令

mount -t nfs -o intr,nolock,rsize=1024,wsize=1024 192.168.0.102:/home/stu/nfs /mnt

/mnt是mini2440上的目录
192.168.0.102是linux主机的IP地址
挂载前要保证mini2440开发板能ping通linux主机
linux的/home/stu/nfs将挂载在mini2440的/mnt

---

2440通过nfs里的内核启动

1.先reboot进入u-boot界面
2.设置ipaddr和serverip

OpenJTAG> set ipaddr 192.168.1.17
OpenJTAG> set serverip 192.168.1.103
OpenJTAG> save

3.ping主机，看能不能通

OpenJTAG> ping 192.168.1.103
ERROR: resetting DM9000 -> not responding
dm9000 i/o: 0x20000000, id: 0x90000a46 
DM9000: running in 16 bit mode
MAC: 08:00:3e:26:0a:5b
could not establish link
host 192.168.1.103 is alive

看到alive已经可以通
4.通过nfs启动内核

nfs 32000000 192.168.1.103:/home/book/nfs/uImage_4_3;bootm 32000000