ug nxopen 二次开发cam部分添加操作和程序组

思路：
1.添加操作，也就是平面铣，轮廓铣，多轴铣…成为主类型，由UF_CAM_opt_ask_types得到；
每个下面有许多子类型，由UF_CAM_opt_ask_subtypes得到，改变第二个参数可以改变得到的四个视图是哪个视图。然后想要那个子类型就添加就好了
程序里有打印子类型的方法，可以试一下看看有哪些子类型和主类型
2.添加程序组
3.将操作加入到程序组里面
代码如下

int type_count = 0; 
        int subtype_count = 0;
    int error_code = 0;
        int ii = 0, jj = 0, kk = 0;
        int ll = 1;
        int uchoice = 0;
        int prog_sub_cnt = 0;
     int mthd_sub_cnt = 0;
    int geom_sub_cnt = 0;
    int tool_sub_cnt = 0;
        int knt = 0;
        int choice = 0;
        int numop = 0;
        int obj_count = 1;
        int istr;

    char const **type_names, **subtype_names = 0; 
        char const **prog_sub_names, **mthd_sub_names, **geom_sub_names, **tool_sub_names; 
        char reason[UF_NCGROUP_MAX_REASON_BUFSIZE];
        char errorstrg[133];
    

        char *uTool[3] = {"Tool_1","Tool_2","Tool_3"};

        char *uMethod[3] = {"Roughing","Semi-Finish","Flowcut"};

        char uOper[] [38] = {"CAVITY_MILL","CONTOUR_AREA","FLOWCUT_SINGLE"};

        char *uPrognam = {"UserGroup"};
        
    tag_t *operTag = 0;
        tag_t setupTag;
    tag_t partTag, progTag = NULL_TAG, mthdTag, geomTag = NULL_TAG, toolTag;
        tag_t progRootTag, mthdRootTag, geomRootTag, toolRootTag; 
    tag_t prog_null; 
    tag_t geom_null; 
    tag_t mthd_null; 
    tag_t tool_null;
        tag_t wrkp_tag;

    logical answer;
        logical generate;
	char buffer[256];//以上参数直接从ug自带实例复制过来的，有的没用到
	// TODO: add your code here
	UF_initialize();
	UF_CAM_opt_ask_types( &type_count, &type_names );//得到主类型
	UF_UI_open_listing_window();
	if(type_count > 0)//此循环将主类型打印出来
	{
		sprintf(buffer, "type count = %d\n", type_count );
		UF_UI_write_listing_window(buffer);
                for ( knt = 0; knt < type_count; knt++ )
				{
				sprintf(buffer,"TypeName(%d) is %s\n", knt, type_names[knt]);
				UF_UI_write_listing_window(buffer);
				}
	}


	UF_SETUP_ask_setup( &setupTag );
	
	if(type_count > 0)//次循环打印多轴铣的操作子类型
	{
	UF_CAM_opt_ask_subtypes( type_names[2], UF_CAM_OPT_STYPE_CLS_OPER, &subtype_count, &subtype_names );
	sprintf(buffer, "subtype count = %d\n", subtype_count );
	UF_UI_write_listing_window(buffer);
                for ( knt = 0; knt < subtype_count; knt++ )
				{
				sprintf(buffer,"SubTypeName(%d) is %s\n", knt, subtype_names[knt]);
				UF_UI_write_listing_window(buffer);
				}
	}

	UF_CAM_opt_ask_subtypes( type_names[2], UF_CAM_OPT_STYPE_CLS_PROG, &prog_sub_cnt,&prog_sub_names );//此处得到程序视图的所有文件
	sprintf(buffer, "prog_subtype count = %d\n", prog_sub_cnt );
	UF_UI_write_listing_window(buffer);
                for ( knt = 0; knt < prog_sub_cnt; knt++ )
				{
				sprintf(buffer,"prog_SubTypeName(%d) is %s\n", knt, prog_sub_names[knt]);
				UF_UI_write_listing_window(buffer);
				}
	//创建操作（我用的是多轴铣，所以直接就选择了type_names[2]）
	operTag = (tag_t *)UF_allocate_memory( sizeof( operTag ) * subtype_count, &error_code );
	 UF_OPER_create( (char *) type_names[2], (char *)subtype_names[0], &operTag[0]);
	//创建程序组
	 UF_NCPROG_create( (char *)type_names[2], (char *)prog_sub_names[0], &progTag );
     UF_OBJ_set_name( progTag, uPrognam );
     UF_SETUP_ask_program_root( setupTag, &progRootTag );
	 UF_NCGROUP_accept_member( progRootTag, progTag );
	 //在程序组中加入操作
	 UF_NCGROUP_accept_member( progTag, operTag[0] );

	 UF_DISP_refresh ();

	UF_terminate();

注意：

1. UF_DISP_refresh ();必须要加，不然显示不出来
2. 这个加入的操作不能用，因为还要加刀具啊，部件啊，具体参数之类的
3. UF_CAM_opt_ask_subtypes( type_names[2], UF_CAM_OPT_STYPE_CLS_PROG, &prog_sub_cnt,&prog_sub_names );//此处得到程序视图的所有文件
   这句话就是这个东西
   
   得到的结果就一个PROGRAM。