苹果无线充电方案与5W无线充电方案对比

无线充电方案7.5W与5W对比

今年的流行词就是——无线充电了,我也开始渐渐发现身边的许多电子设备上附加了无线充电功能。说实话,目前这项技术虽然说也有10W的功率给手机快速无线充电,但是在炎热的夏天,室温在28℃以上,手机无线充电的功率基本上维持在5W的功率。到了冬天,环境温度在20℃以下,就会保持快速无线充电,给手机充电的速度还是可以接受的。

这里写图片描述
既然无线充电给手机充电并不快,为什么这么多的公司都要加入这个项目呢?淘宝上搜索,估计有上百款不同种类的产品,而且产品详情都会说7.5W、10W、5W,这些都是什么意思呢?实际充电效果如何呢?今天我们来对比测试一下。
目前10W无线充电主要是三星和华为手机,大部分方案都是以三星手机作为匹配对象,因为三星有无线充电功能的手机比较多,比如三星S6、S7、S8、S9等等,他们已经将无线充电功能作为手机标配了。7.5W无线充电以苹果手机为主,如iPhone8、iPhoneX都支持无线充电。不过,三星官方的无线充电器可以给三星手机10W快速无线充电,却只能给苹果提供5W的无线充电,反之亦然。所以第三方方案公司开发了同时兼容这两家规格的无线充电方案。

这里写图片描述

先看一下7.5W无线充电测试情况。(测试条件:Qc2.0充电器9V输出,环境温度29℃,iPhone8PLUS手机,不开空调,不开风扇。)
从下图中可以看到,在前面10分钟会跳到7.5W快速无线充电,之后一直都维持在5W充电,iPhone8PLUS手机充满电需要4个多小时。

这里写图片描述

再看5W的无线充电器测试情况:(测试条件:Qc2.0充电器5V输出,环境温度29℃,三星S7手机,不开空调,不开风扇。)三星S7充满电在2小时20分钟。

这里写图片描述

在上图中的曲线可以看到,电流会在0.5-1A之间跳动,这是因为手机内部的电池上带有温度感应器,我们测试发现iPhone手机外壳温度超过30℃后,功率就会降低到5W甚至更低,直到温度低于30℃后,功率又上升到7.5W。而三星S7手机的外部温度超过40℃左右,功率会变化。
无线充电就是利用电磁感应的原理,只要工作就不可避免会出现发热,环境温度高,热量未散发出去,手机就会自动降低充电功率,防止出现安全事故。
无线充电这么不给力,为什么手机厂商还在大力推广呢,无线充电器厂商也在不断的布局自己的市场,就连身边的电器产品都增加了这个功能,这是什么原因呢?
那是因为无线充电比较方便,特别是身边的所有电器如:台灯、桌面日历、蓝牙音箱、FM收音机等等都能充电时,这项技术的便捷性就体现出来了。随手一放,它就开始安静的充电了,管它充多充少,反正身边到处都能充:吃饭时餐厅桌面能充,工作时有立式无线充,路途中有充电宝无线充,睡觉后还有床头桌也能充。
这就是无线充电的未来!
文章出自深圳市旭鑫胜电子有限公司 无线充舒工,转载的。

  • 2
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
Automotive Wireless Transmitter Controller Features • Conforms to the latest version WPC “Qi” specification • Supports wide DC input voltage range of 6 V (limited duration at Start/Stop operation) to 16 V for automotive battery input • Supports Foreign Object Detection (FOD) • Low-power system standby available using Freescale Touch technology • Provides free positioning solutions by using WPC A or B type multi-coil technology • Uses rail voltage control or phase shift control with fixed operating frequency to control power transfer to help alleviate automotive system interference • Supports the key FOB avoidance function • Supports the operation frequency dithering technology to eliminate the AM band interference • Improved EMC performance for automotive certification • Supports CAN/LIN/IIC/SCI/SPI interfaces • LED for system status indication • Over-voltage/current/temperature protection • Software based solution to provide maximum design freedom and product differentiation • AEC-Q100 grade 2 certification • Dual-mode capable Overview Description The WCT100xA is a wireless power transmitter controller that integrates all required functions for WPC “Qi” compliant wireless power transmitter design. The WCT100xA transmitter IC manages the power transfer by receiving commands from the receiver. Receivers are detected by using either standard protocol methods or Freescale touch sensor technology. Once the mobile device is detected, the WCT100xA controls the power transfer by adjusting rail voltage or phase shift of power stage according to message packets sent by mobile device. To maximize the design freedom and product differentiation, the WCT100xA supports any 5W coil topology capable of supporting WPC Qi-based implementation. In addition, the system supports both WPC and PMA protocols. The WCT100xA also includes CAN/LIN/IIC/SCI/SPI interfaces, over-voltage/current/temperature protection and FOD method to protect from overheating by misplaced metallic foreign object
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值