usb/printerr文件之usb_bsp.c_usb　bsp-CSDN博客

本文链接：https://blog.csdn.net/qq_33772147/article/details/131050885

该代码实现了一个针对STM32USBOTG外设的板级支持包（BSP），包括初始化函数、配置VBUS、驱动VBUS的函数以及精确延时功能。代码中定义了不同模式下的GPIO配置，并提供了微秒和毫秒级别的延时函数。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

/************************ (C) COPYRIGHT YICHIP *************************
* File Name : usb_bsp.c
* Author : YICHIP
* Version : V1.0.0
* Date : 21-May-2019
* Description : USB-OTG Core layer.
*****************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "usb_bsp.h"
#include "usb_conf.h"

/** @addtogroup USBH_USER
* @{
*/

/** @defgroup USB_BSP
* @brief This file is responsible to offer board support package
* @{
*/

/** @defgroup USB_BSP_Private_Defines
* @{
*/
//#define USE_ACCURATE_TIME
#define TIM_MSEC_DELAY 0x01
#define TIM_USEC_DELAY 0x02
#define HOST_OVRCURR_PORT GPIOE
#define HOST_OVRCURR_LINE GPIO_Pin_1
#define HOST_OVRCURR_PORT_SOURCE GPIO_PortSourceGPIOE
#define HOST_OVRCURR_PIN_SOURCE GPIO_PinSource1
#define HOST_OVRCURR_PORT_RCC RCC_APB2Periph_GPIOE
#define HOST_OVRCURR_EXTI_LINE EXTI_Line1
#define HOST_OVRCURR_IRQn EXTI1_IRQn

#ifdef USE_STM3210C_EVAL
#define HOST_POWERSW_PORT_RCC RCC_APB2Periph_GPIOC
#define HOST_POWERSW_PORT GPIOC
#define HOST_POWERSW_VBUS GPIO_Pin_9
#else
#ifdef USE_USB_OTG_FS
#define HOST_POWERSW_PORT_RCC RCC_AHB1Periph_GPIOH
#define HOST_POWERSW_PORT GPIOH
#define HOST_POWERSW_VBUS GPIO_Pin_5
#endif
#endif

#define HOST_SOF_OUTPUT_RCC RCC_APB2Periph_GPIOA
#define HOST_SOF_PORT GPIOA
#define HOST_SOF_SIGNAL GPIO_Pin_8

/**
* @}
*/

/** @defgroup USB_BSP_Private_TypesDefinitions
* @{
*/
/**
* @}
*/

/** @defgroup USB_BSP_Private_Macros
* @{
*/
/**
* @}
*/

/** @defgroup USBH_BSP_Private_Variables
* @{
*/
ErrorStatus HSEStartUpStatus;
#ifdef USE_ACCURATE_TIME
volatile uint32_t BSP_delay = 0;
#endif
/**
* @}
*/

/** @defgroup USBH_BSP_Private_FunctionPrototypes
* @{
*/

#ifdef USE_ACCURATE_TIME
static void BSP_SetTime(uint8_t Unit);
static void BSP_Delay(uint32_t nTime,uint8_t Unit);
static void USB_OTG_BSP_TimeInit ( void );
#endif
/**
* @}
*/

/** @defgroup USB_BSP_Private_Functions
* @{
*/

/**
* @brief USB_OTG_BSP_Init
* Initilizes BSP configurations
* @param None
* @retval None
*/

void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev)
{

}
/**
* @brief USB_OTG_BSP_EnableInterrupt
* Configures USB Global interrupt
* @param None
* @retval None
*/
void USB_OTG_BSP_EnableInterrupt(USB_OTG_CORE_HANDLE *pdev)
{

}

/**
* @brief BSP_Drive_VBUS
* Drives the Vbus signal through IO
* @param state : VBUS states
* @retval None
*/

void USB_OTG_BSP_DriveVBUS(USB_OTG_CORE_HANDLE *pdev, uint8_t state)
{

}

/**
* @brief USB_OTG_BSP_ConfigVBUS
* Configures the IO for the Vbus and OverCurrent
* @param None
* @retval None
*/

void USB_OTG_BSP_ConfigVBUS(USB_OTG_CORE_HANDLE *pdev)
{
#ifdef USE_USB_OTG_FS
GPIO_InitTypeDef GPIO_InitStructure;

#ifdef USE_STM3210C_EVAL
RCC_APB2PeriphClockCmd(HOST_POWERSW_PORT_RCC, ENABLE);


/* Configure Power Switch Vbus Pin */
GPIO_InitStructure.GPIO_Pin = HOST_POWERSW_VBUS;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(HOST_POWERSW_PORT, &GPIO_InitStructure);
#else
#ifdef USE_USB_OTG_FS
RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOH , ENABLE);

GPIO_InitStructure.GPIO_Pin = HOST_POWERSW_VBUS;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
GPIO_Init(HOST_POWERSW_PORT,&GPIO_InitStructure);
#endif
#endif

/* By Default, DISABLE is needed on output of the Power Switch */
GPIO_SetBits(HOST_POWERSW_PORT, HOST_POWERSW_VBUS);

USB_OTG_BSP_mDelay(200); /* Delay is need for stabilising the Vbus Low
in Reset Condition, when Vbus=1 and Reset-button is pressed by user */
#endif
}

/**
* @brief USB_OTG_BSP_TimeInit
* Initializes delay unit using Timer2
* @param None
* @retval None
*/
static void USB_OTG_BSP_TimeInit ( void )
{

}

/**
* @brief USB_OTG_BSP_uDelay
* This function provides delay time in micro sec
* @param usec : Value of delay required in micro sec
* @retval None
*/
void USB_OTG_BSP_uDelay (const uint32_t usec)
{

#ifdef USE_ACCURATE_TIME
BSP_Delay(usec,TIM_USEC_DELAY);
#else
volatile uint32_t count = 0;
const uint32_t utime = (120 * usec / 7);
do
{
if ( ++count > utime )
{
return ;
}
}
while (1);
#endif

}

/**
* @brief USB_OTG_BSP_mDelay
* This function provides delay time in milli sec
* @param msec : Value of delay required in milli sec
* @retval None
*/
void USB_OTG_BSP_mDelay (const uint32_t msec)
{
#ifdef USE_ACCURATE_TIME
BSP_Delay(msec,TIM_MSEC_DELAY);
#else
USB_OTG_BSP_uDelay(msec * 1000);
#endif

}

/**
* @brief USB_OTG_BSP_TimerIRQ
* Time base IRQ
* @param None
* @retval None
*/

void USB_OTG_BSP_TimerIRQ (void)
{
#ifdef USE_ACCURATE_TIME
// if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET)
// {
// TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
// if (BSP_delay > 0x00)
// {
// BSP_delay--;
// }
// else
// {
// TIM_Cmd(TIM2,DISABLE);
// }
// }
#endif
}

#ifdef USE_ACCURATE_TIME
/**
* @brief BSP_Delay
* Delay routine based on TIM2
* @param nTime : Delay Time
* @param unit : Delay Time unit : mili sec / micro sec
* @retval None
*/
static void BSP_Delay(uint32_t nTime, uint8_t unit)
{

// BSP_delay = nTime;
// BSP_SetTime(unit);
// while(BSP_delay != 0);
// TIM_Cmd(TIM2,DISABLE);
}

/**
* @brief BSP_SetTime
* Configures TIM2 for delay routine based on TIM2
* @param unit : msec /usec
* @retval None
*/
static void BSP_SetTime(uint8_t unit)
{
// TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
//
// TIM_Cmd(TIM2,DISABLE);
// TIM_ITConfig(TIM2, TIM_IT_Update, DISABLE);
//
//
// if(unit == TIM_USEC_DELAY)
// {
// TIM_TimeBaseStructure.TIM_Period = 11;
// }
// else if(unit == TIM_MSEC_DELAY)
// {
// TIM_TimeBaseStructure.TIM_Period = 11999;
// }
// TIM_TimeBaseStructure.TIM_Prescaler = 5;
// TIM_TimeBaseStructure.TIM_ClockDivision = 0;
// TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
//
// TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
// TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
//
// TIM_ARRPreloadConfig(TIM2, ENABLE);
//
// /* TIM IT enable */
// TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
//
// /* TIM2 enable counter */
// TIM_Cmd(TIM2, ENABLE);
}

#endif

/**
* @}
*/

/************************ (C) COPYRIGHT Yichip Microelectronics *****END OF FILE****/

以下为.h文件：

/************************ (C) COPYRIGHT YICHIP *************************
* File Name : usb_bsp.h
* Author : YICHIP
* Version : V1.0.0
* Date : 21-May-2019
* Description : Specific api's relative to the used hardware platform.
*****************************************************************************/

#ifndef __USB_BSP_H__
#define __USB_BSP_H__

#ifdef __cplusplus
extern "C" {
#endif

/* Include ------------------------------------------------------------------*/
#include "usb_core.h"
#include "usb_conf.h"
/* Exported types -----------------------------------------------------------*/
/* Exported constants -------------------------------------------------------*/
/* Exported macro -----------------------------------------------------------*/
/* Exported functions -------------------------------------------------------*/
/* Exported variables -------------------------------------------------------*/
/** @addtogroup USB_OTG_DRIVER
* @{
*/

/** @defgroup USB_BSP
* @brief This file is the
* @{
*/

/** @defgroup USB_BSP_Exported_Defines
* @{
*/
/**
* @}
*/

/** @defgroup USB_BSP_Exported_Types
* @{
*/
/**
* @}
*/

/** @defgroup USB_BSP_Exported_Macros
* @{
*/
/**
* @}
*/

/** @defgroup USB_BSP_Exported_Variables
* @{
*/
/**
* @}
*/

/** @defgroup USB_BSP_Exported_FunctionsPrototype
* @{
*/
void BSP_Init(void);

void USB_OTG_BSP_Init (USB_OTG_CORE_HANDLE *pdev);
void USB_OTG_BSP_uDelay (const uint32_t usec);
void USB_OTG_BSP_mDelay (const uint32_t msec);
void USB_OTG_BSP_EnableInterrupt (USB_OTG_CORE_HANDLE *pdev);
#ifdef USE_HOST_MODE
void USB_OTG_BSP_ConfigVBUS(USB_OTG_CORE_HANDLE *pdev);
void USB_OTG_BSP_DriveVBUS(USB_OTG_CORE_HANDLE *pdev,uint8_t state);
#endif
/**
* @}
*/

#ifdef __cplusplus
}
#endif

#endif /* __USB_BSP_H__ */