关于BGP的负载实验之四

关于EBGP的负载

1、实验目的：查看EBGP的负载
2、实验工具：GNS3
3、实验拓扑

R1、R2、R3、R4、R5各自属于一个区域分别为AS1、AS2、AS3、AS4、AS5、
实验方式:开始针对EBGP的负载，查看BGP表与路由表。

一、R3相关配置

interface Loopback0
 ip address 3.3.3.3 255.255.255.255
!
interface Ethernet0/0
 ip address 10.1.1.1 255.255.255.252
 half-duplex
!
interface Ethernet0/1
 ip address 30.1.1.1 255.255.255.252
 half-duplex
!
interface Ethernet0/2
 ip address 50.1.1.1 255.255.255.252
 half-duplex
!
router ospf 10
 log-adjacency-changes
 network 10.1.1.0 0.0.0.3 area 0
 network 30.1.1.0 0.0.0.3 area 0
 network 50.1.1.0 0.0.0.3 area 0
!
router bgp 300
 no synchronization
 bgp log-neighbor-changes
 network 3.3.3.3 mask 255.255.255.255
 neighbor 10.1.1.2 remote-as 100
 neighbor 30.1.1.2 remote-as 100
 neighbor 50.1.1.2 remote-as 100
 no auto-summary

二、R1相关配置

interface Ethernet0/0
 ip address 10.1.1.2 255.255.255.252
 half-duplex
!
interface Ethernet0/1
 ip address 20.1.1.1 255.255.255.252
 half-duplex
!
router ospf 10
 log-adjacency-changes
 network 10.1.1.0 0.0.0.3 area 0
 network 20.1.1.0 0.0.0.3 area 0
!
router bgp 100
 no synchronization
 bgp log-neighbor-changes
 neighbor 10.1.1.1 remote-as 300
 neighbor 20.1.1.2 remote-as 200
 no auto-summary

三、R2相关配置

interface Loopback0