Harbor安装

1. 下载相应的压缩包:Harbor
   这里我下载的是1.9.3

2. 解压:tar xvf harbor-offline-installer-v1.9.3.tgz

3. 配置相应的信息：在harbor.yml文件中，找到hostname，然后将其后边的数据改成你的机器的IP地址:hostname: 192.168.10.1

4. 安装:sudo ./install.sh
   如果在这一步出现error:ERROR: for proxy Cannot start service proxy: driver failed programming external connectivity on endpoint nginx (015acd61ed19a8a2b6f21e58246b1dcabd42c0b09f9beaf6ae1be3c174a5824e): Error starting userland proxy: listen tcp 0.0.0.0:80: bind: address already in use ERROR: Encountered errors while bringing up the project.
   相应的解决方法：

			1.sudo su#进入root模式
			2.netstat -nlp#找到80端口的进程对应的PID
			3.kill PID#这个PID指的是第二步找到的
	可以用此方法去解决所有类似端口占用，ip绑定的问题。

Part2:
这里博主又尝试去安装了下最新版本的v1.10.6。这里其实没啥不同的，但是有几点，我还是要提醒下大家:

• 首先根据配置相应的HTTPS的认证的教程
• 根据上面的教程配置完以后，在你的Harbor.yml中需要修改两处:

第一处是hostname:
你可以写你的本机的ip，也可以通过修改设置/etc/hosts中设置相应的ip–域名的映射关系进行绑定你的域名。比如我这里设置的就是
192.168.10.2 zailushang.com
certificate: /etc/docker/certs.d/zailushang.com/zailushang.com.cert
private_key: /etc/docker/certs.d/zailushang.com/zailushang.com.key
这两处是根据上边那个官网配置的HTTP认证的那个路径设置的，你需要根据你自己的来，如果你按照的是官网的方法，那么跟我的基本上就是Hostname不一样而已。

# Configuration file of Harbor

# The IP address or hostname to access admin UI and registry service.
# DO NOT use localhost or 127.0.0.1, because Harbor needs to be accessed by external clients.
hostname: zailushang.com

# http related config
http:
  # port for http, default is 80. If https enabled, this port will redirect to https port
  port: 80

# https related config
https:
  # https port for harbor, default is 443
  port: 443
  # The path of cert and key files for nginx
  certificate: /etc/docker/certs.d/zailushang.com/zailushang.com.cert
  private_key: /etc/docker/certs.d/zailushang.com/zailushang.com.key

# Uncomment external_url if you want to enable external proxy
# And when it enabled the hostname will no longer used
# external_url: https://reg.mydomain.com:8433

# The initial password of Harbor admin
# It only works in first time to install harbor
# Remember Change the admin password from UI after launching Harbor.
harbor_admin_password: Harbor12345

# Harbor DB configuration
database:
  # The password for the root user of Harbor DB. Change this before any production use.
  password: root123
  # The maximum number of connections in the idle connection pool. If it <=0, no idle connections are retained.
  max_idle_conns: 50
  # The maximum number of open connections to the database. If it <= 0, then there is no limit on the number of open connections.
  # Note: the default number of connections is 100 for postgres.
  max_open_conns: 100

# The default data volume
data_volume: /data

# Harbor Storage settings by default is using /data dir on local filesystem
# Uncomment storage_service setting If you want to using external storage
# storage_service:
#   # ca_bundle is the path to the custom root ca certificate, which will be injected into the truststore
#   # of registry's and chart repository's containers.  This is usually needed when the user hosts a internal storage with self signed certificate.
#   ca_bundle:

#   # storage backend, default is filesystem, options include filesystem, azure, gcs, s3, swift and oss
#   # for more info about this configuration please refer https://docs.docker.com/registry/configuration/
#   filesystem:
#     maxthreads: 100
#   # set disable to true when you want to disable registry redirect
#   redirect:
#     disabled: false

# Clair configuration
clair:
  # The interval of clair updaters, the unit is hour, set to 0 to disable the updaters.
  updaters_interval: 12

jobservice:
  # Maximum number of job workers in job service
  max_job_workers: 10

notification:
  # Maximum retry count for webhook job
  webhook_job_max_retry: 10

chart:
  # Change the value of absolute_url to enabled can enable absolute url in chart
  absolute_url: disabled

# Log configurations
log:
  # options are debug, info, warning, error, fatal
  level: info
  # configs for logs in local storage
  local:
    # Log files are rotated log_rotate_count times before being removed. If count is 0, old versions are removed rather than rotated.
    rotate_count: 50
    # Log files are rotated only if they grow bigger than log_rotate_size bytes. If size is followed by k, the size is assumed to be in kilobytes.
    # If the M is used, the size is in megabytes, and if G is used, the size is in gigabytes. So size 100, size 100k, size 100M and size 100G
    # are all valid.
    rotate_size: 200M
    # The directory on your host that store log
    location: /var/log/harbor

  # Uncomment following lines to enable external syslog endpoint.
  # external_endpoint:
  #   # protocol used to transmit log to external endpoint, options is tcp or udp
  #   protocol: tcp
  #   # The host of external endpoint
  #   host: localhost
  #   # Port of external endpoint
  #   port: 5140

#This attribute is for migrator to detect the version of the .cfg file, DO NOT MODIFY!
_version: 1.10.0

# Uncomment external_database if using external database.
# external_database:
#   harbor:
#     host: harbor_db_host
#     port: harbor_db_port
#     db_name: harbor_db_name
#     username: harbor_db_username
#     password: harbor_db_password
#     ssl_mode: disable
#     max_idle_conns: 2
#     max_open_conns: 0
#   clair:
#     host: clair_db_host
#     port: clair_db_port
#     db_name: clair_db_name
#     username: clair_db_username
#     password: clair_db_password
#     ssl_mode: disable
#   notary_signer:
#     host: notary_signer_db_host
#     port: notary_signer_db_port
#     db_name: notary_signer_db_name
#     username: notary_signer_db_username
#     password: notary_signer_db_password
#     ssl_mode: disable
#   notary_server:
#     host: notary_server_db_host
#     port: notary_server_db_port
#     db_name: notary_server_db_name
#     username: notary_server_db_username
#     password: notary_server_db_password
#     ssl_mode: disable

# Uncomment external_redis if using external Redis server
# external_redis:
#   host: redis
#   port: 6379
#   password:
#   # db_index 0 is for core, it's unchangeable
#   registry_db_index: 1
#   jobservice_db_index: 2
#   chartmuseum_db_index: 3
#   clair_db_index: 4

# Uncomment uaa for trusting the certificate of uaa instance that is hosted via self-signed cert.
# uaa:
#   ca_file: /path/to/ca

# Global proxy
# Config http proxy for components, e.g. http://my.proxy.com:3128
# Components doesn't need to connect to each others via http proxy.
# Remove component from `components` array if want disable proxy
# for it. If you want use proxy for replication, MUST enable proxy
# for core and jobservice, and set `http_proxy` and `https_proxy`.
# Add domain to the `no_proxy` field, when you want disable proxy
# for some special registry.
proxy:
  http_proxy:
  https_proxy:
  # no_proxy endpoints will appended to 127.0.0.1,localhost,.local,.internal,log,db,redis,nginx,core,portal,postgresql,jobservice,registry,registryctl,clair,chartmuseum,notary-server
  no_proxy:
  components:
    - core
    - jobservice
    - clair

最后登录Harbor:

				https://192.168.10.2
				或者
				https://zailushang.com
		用户名:admin
		密码:  Harbor12345
	这个是默认的，记得自己去修改

---

今天又有了点小知识分享下:你只需要在同一个局域网下的一台电脑上安装一个Harbor即可。其它的都可以通过一些小操作就可以实现直接登录上Harbor。

• 第一步:

		在/etc/docker/daemon.json上增加一条规则即可:
		{  
    		"insecure-registries" : [ "192.168.1.106" ,"zailushang.com" ]  
		}
		sudo systemctl daemon-reload
		sudo systemctl docker restart
		注意:
		192.168.1.106是你的Harbor所安装的机器的IP地址
		zailushang.com这个是你在Harbor所安装的机器上的/etc/hosts里加的映射:
				192.168.1.106 zailushang.com
		

• 第二步

	在你想要登录Harbor的机器中加上:zailushang.com的映射
		sudo vim /etc/hosts
			192.168.1.106	zailushang.com
	然后就可以登录了
			docker login zailushang.com
			或者
			docker login 192.168.1.106