从头用脚分析FFmpeg源码 - avcodec_send_packet | avcodec_receive_frame

Adonis_sz

已于 2023-04-27 16:14:43 修改

阅读量1k

点赞数 1

文章标签： ffmpeg 音视频 c

于 2023-03-30 11:48:31 首次发布

本文链接：https://blog.csdn.net/qq_35585843/article/details/129841984

版权

avcodec_send_packet和avcodec_receive_frame是一对孪生兄弟，avcodec_send_packet把需要解码的AVPacket送到解码器中，avcodec_receive_frame则是得到解码完成后的frame。
这两个函数都是通过调用decode_receive_frame_internal来实现的。

avcodec_send_packet 作用

把未经过解码的AVPacket送到AVCodecContext中解码。
FFmpeg的说明如下：

/**
 * Supply raw packet data as input to a decoder.
 *
 * Internally, this call will copy relevant AVCodecContext fields, which can
 * influence decoding per-packet, and apply them when the packet is actually
 * decoded. (For example AVCodecContext.skip_frame, which might direct the
 * decoder to drop the frame contained by the packet sent with this function.)
 *
 * @return 0 on success, otherwise negative error code:
 *      AVERROR(EAGAIN):   input is not accepted in the current state - user
 *                         must read output with avcodec_receive_frame() (once
 *                         all output is read, the packet should be resent, and
 *                         the call will not fail with EAGAIN).
 *      AVERROR_EOF:       the decoder has been flushed, and no new packets can
 *                         be sent to it (also returned if more than 1 flush
 *                         packet is sent)
 *      AVERROR(EINVAL):   codec not opened, it is an encoder, or requires flush
 *      AVERROR(ENOMEM):   failed to add packet to internal queue, or similar
 *      other errors: legitimate decoding errors
 */
int avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt);

/**
 * Supply a raw video or audio frame to the encoder. Use avcodec_receive_packet()
 * to retrieve buffered output packets.
 * @return 0 on success, otherwise negative error code:
 *      AVERROR(EAGAIN):   input is not accepted in the current state - user
 *                         must read output with avcodec_receive_packet() (once
 *                         all output is read, the packet should be resent, and
 *                         the call will not fail with EAGAIN).
 *      AVERROR_EOF:       the encoder has been flushed, and no new frames can
 *                         be sent to it
 *      AVERROR(EINVAL):   codec not opened, refcounted_frames not set, it is a
 *                         decoder, or requires flush
 *      AVERROR(ENOMEM):   failed to add packet to internal queue, or similar
 *      other errors: legitimate encoding errors
 */
int avcodec_send_frame(AVCodecContext *avctx, const AVFrame *frame);

简而言之，avcodec_send_packet就是把AVPacket送到AVCodecContext，然后让AVCodecContext解码。avcodec_receive_frame获得解码后的AVFrame。
需要注意的是，AVCodecContext必须经过avcodec_open2函数打开，输入的AVPacket会在内部增加一个ref，所以如果要free，外部也应该调用av_packet_unref。

avcodec_send_packet 源码

把avpk送到avci->bsf中，等待解码。然后通过判断avci->buffer_frame->buf[0]是否null来决定是否调用decode_receive_frame_internal来接受解码后的frame。

int attribute_align_arg avcodec_send_packet(AVCodecContext *avctx, const AVPacket *avpkt)
{
    AVCodecInternal *avci = avctx->internal;
    int ret;

	// 未open和编码器都不行
    if (!avcodec_is_open(avctx) || !av_codec_is_decoder(avctx->codec))
        return AVERROR(EINVAL);

	// 检测是否应该先flush
    if (avctx->internal->draining)
        return AVERROR_EOF;

    if (avpkt && !avpkt->size && avpkt->data)
        return AVERROR(EINVAL);

    av_packet_unref(avci->buffer_pkt);
    // avci->buffer_pkt也reference输入的avpkt
    // 相当于一次copy （不一定是深copy）
    if (avpkt && (avpkt->data || avpkt->side_data_elems)) {
        ret = av_packet_ref(avci->buffer_pkt, avpkt);
        if (ret < 0)
            return ret;
    }

	// 把avci->buffer_pkt送到avci->bsf中
	// 即将avci->buffer_pkt copy到avci->bsf->internal->buffer_pkt，然后可以经过bsf。
	// AVBSFContext一般是对AVPacket进行某些格式上的转换，比如对h264来说，存在AVCC和ANNEXB两种格式，这里就是把AVCC格式转换成为ANNEXB
    ret = av_bsf_send_packet(avci->bsf, avci->buffer_pkt);
    if (ret < 0) {
        av_packet_unref(avci->buffer_pkt);
        return ret;
    }

    if (!avci->buffer_frame->buf[0]) {
    	//这个函数会在avcodec_send_packet或者avcodec_receive_frame中调用
    	//avci->buffer_frame->buf[0]为null，就在avcodec_send_packet中调用
    	//avci->buffer_frame->buf[0]不为null，就在avcodec_receive_frame中调用
    	//decode_receive_frame_internal中
        ret = decode_receive_frame_internal(avctx, avci->buffer_frame);
        if (ret < 0 && ret != AVERROR(EAGAIN) && ret != AVERROR_EOF)
            return ret;
    }

    return 0;
}

avcodec_receive_frame 源码

int attribute_align_arg avcodec_receive_frame(AVCodecContext *avctx, AVFrame *frame)
{
    AVCodecInternal *avci = avctx->internal;
    int ret, changed;

    av_frame_unref(frame);

	// 判断是否调用过avcodec_open2函数，是否为解码器
    if (!avcodec_is_open(avctx) || !av_codec_is_decoder(avctx->codec))
        return AVERROR(EINVAL);

	// 根据avci->buffer_frame->buf[0]判断是否存在解码完成的帧，如果存在就直接move到frame中。
	// 如果没有就调用decode_receive_frame_internal把AVPacket送去解码线程，然后获得解码之后的AVFrame。
    if (avci->buffer_frame->buf[0]) {
        av_frame_move_ref(frame, avci->buffer_frame);
    } else {
        ret = decode_receive_frame_internal(avctx, frame);
        if (ret < 0)
            return ret;
    }

    if (avctx->codec_type == AVMEDIA_TYPE_VIDEO) {
        ret = apply_cropping(avctx, frame);
        if (ret < 0) {
            av_frame_unref(frame);
            return ret;
        }
    }

    avctx->frame_number++;

    if (avctx->flags & AV_CODEC_FLAG_DROPCHANGED) {

        if (avctx->frame_number == 1) {
            avci->initial_format = frame->format;
            switch(avctx->codec_type) {
            case AVMEDIA_TYPE_VIDEO:
                avci->initial_width  = frame->width;
                avci->initial_height = frame->height;
                break;
            case AVMEDIA_TYPE_AUDIO:
                avci->initial_sample_rate = frame->sample_rate ? frame->sample_rate :
                                                                 avctx->sample_rate;
                avci->initial_channels       = frame->channels;
                avci->initial_channel_layout = frame->channel_layout;
                break;
            }
        }

        if (avctx->frame_number > 1) {
            changed = avci->initial_format != frame->format;

            switch(avctx->codec_type) {
            case AVMEDIA_TYPE_VIDEO:
                changed |= avci->initial_width  != frame->width ||
                           avci->initial_height != frame->height;
                break;
            case AVMEDIA_TYPE_AUDIO:
                changed |= avci->initial_sample_rate    != frame->sample_rate ||
                           avci->initial_sample_rate    != avctx->sample_rate ||
                           avci->initial_channels       != frame->channels ||
                           avci->initial_channel_layout != frame->channel_layout;
                break;
            }

            if (changed) {
                avci->changed_frames_dropped++;
                av_log(avctx, AV_LOG_INFO, "dropped changed frame #%d pts %"PRId64
                                            " drop count: %d \n",
                                            avctx->frame_number, frame->pts,
                                            avci->changed_frames_dropped);
                av_frame_unref(frame);
                return AVERROR_INPUT_CHANGED;
            }
        }
    }
    return 0;
}

decode_receive_frame_internal 源码

获取解码后的frame。

static int decode_receive_frame_internal(AVCodecContext *avctx, AVFrame *frame)
{
    AVCodecInternal *avci = avctx->internal;
    int ret;

    av_assert0(!frame->buf[0]);

	// 只有少部分解码器会实现这个函数，实现这个函数的解码器不会实现多线程解码，比如mjpeg
	// mediacodec的解码器，也会实现这个函数，在这个函数中，是从bsf中获取的avpacket。
    if (avctx->codec->receive_frame) {
        ret = avctx->codec->receive_frame(avctx, frame);
        if (ret != AVERROR(EAGAIN))
            av_packet_unref(avci->last_pkt_props);
    } else
    	//大部分都是调用这个函数
        ret = decode_simple_receive_frame(avctx, frame);

    if (ret == AVERROR_EOF)
        avci->draining_done = 1;

    if (!ret) {
        frame->best_effort_timestamp = guess_correct_pts(avctx,
                                                         frame->pts,
                                                         frame->pkt_dts);

        /* the only case where decode data is not set should be decoders
         * that do not call ff_get_buffer() */
        av_assert0((frame->private_ref && frame->private_ref->size == sizeof(FrameDecodeData)) ||
                   !(avctx->codec->capabilities & AV_CODEC_CAP_DR1));

        if (frame->private_ref) {
            FrameDecodeData *fdd = (FrameDecodeData*)frame->private_ref->data;

            if (fdd->post_process) {
                ret = fdd->post_process(avctx, frame);
                if (ret < 0) {
                    av_frame_unref(frame);
                    return ret;
                }
            }
        }
    }

    /* free the per-frame decode data */
    av_buffer_unref(&frame->private_ref);

    return ret;
}

decode_simple_receive_frame 源码

通过调用decode_simple_internal来实现解码AVPacket，然后获取解码后的frame。

static int decode_simple_receive_frame(AVCodecContext *avctx, AVFrame *frame)
{
    int ret;
    int64_t discarded_samples = 0;

    while (!frame->buf[0]) {
        if (discarded_samples > avctx->max_samples)
            return AVERROR(EAGAIN);
        ret = decode_simple_internal(avctx, frame, &discarded_samples);
        if (ret < 0)
            return ret;
    }

    return 0;
}

decode_simple_internal 源码

avcodec_send_packet和avcodec_receive_frame中最核心的函数，大部分的编码格式都会调用到这里解码。

/*
 * The core of the receive_frame_wrapper for the decoders implementing
 * the simple API. Certain decoders might consume partial packets without
 * returning any output, so this function needs to be called in a loop until it
 * returns EAGAIN.
 **/
static inline int decode_simple_internal(AVCodecContext *avctx, AVFrame *frame, int64_t *discarded_samples)
{
    AVCodecInternal   *avci = avctx->internal;
    DecodeSimpleContext *ds = &avci->ds;
    AVPacket           *pkt = ds->in_pkt;
    int got_frame, actual_got_frame;
    int ret;

    if (!pkt->data && !avci->draining) {
        av_packet_unref(pkt);
        // 从avci->bsf中获得AVPacket，然后设置到pkt中
        ret = ff_decode_get_packet(avctx, pkt);
        if (ret < 0 && ret != AVERROR_EOF)
            return ret;
    }

    // Some codecs (at least wma lossless) will crash when feeding drain packets
    // after EOF was signaled.
    if (avci->draining_done)
        return AVERROR_EOF;

    if (!pkt->data &&
        !(avctx->codec->capabilities & AV_CODEC_CAP_DELAY ||
          avctx->active_thread_type & FF_THREAD_FRAME))
        return AVERROR_EOF;

    got_frame = 0;

	// 多线程解码 或者 单线程
    if (HAVE_THREADS && avctx->active_thread_type & FF_THREAD_FRAME) {
    	// 多线程解码
    	// 先调用avcodec_open2打开多个解码线程，然后这里实现多线程解码
        ret = ff_thread_decode_frame(avctx, frame, &got_frame, pkt);
    } else {
    	//调用对应AVCodec的decode方法，h264默认解码器的话，就会调用ffmpeg内置的h264解码器
        ret = avctx->codec->decode(avctx, frame, &got_frame, pkt);

        if (!(avctx->codec->caps_internal & FF_CODEC_CAP_SETS_PKT_DTS))
            frame->pkt_dts = pkt->dts;
        if (avctx->codec->type == AVMEDIA_TYPE_VIDEO) {
            if(!avctx->has_b_frames)
                frame->pkt_pos = pkt->pos;
            //FIXME these should be under if(!avctx->has_b_frames)
            /* get_buffer is supposed to set frame parameters */
            if (!(avctx->codec->capabilities & AV_CODEC_CAP_DR1)) {
                if (!frame->sample_aspect_ratio.num)  frame->sample_aspect_ratio = avctx->sample_aspect_ratio;
                if (!frame->width)                    frame->width               = avctx->width;
                if (!frame->height)                   frame->height              = avctx->height;
                if (frame->format == AV_PIX_FMT_NONE) frame->format              = avctx->pix_fmt;
            }
        }
    }
    emms_c();
    actual_got_frame = got_frame;

    if (avctx->codec->type == AVMEDIA_TYPE_VIDEO) {
    	//discard 丢弃掉了
        if (frame->flags & AV_FRAME_FLAG_DISCARD)
            got_frame = 0;
    } else if (avctx->codec->type == AVMEDIA_TYPE_AUDIO) {
        uint8_t *side;
        buffer_size_t side_size;
        uint32_t discard_padding = 0;
        uint8_t skip_reason = 0;
        uint8_t discard_reason = 0;

		//设置frame的一些参数
        if (ret >= 0 && got_frame) {
            if (frame->format == AV_SAMPLE_FMT_NONE)
                frame->format = avctx->sample_fmt;
            if (!frame->channel_layout)
                frame->channel_layout = avctx->channel_layout;
            if (!frame->channels)
                frame->channels = avctx->channels;
            if (!frame->sample_rate)
                frame->sample_rate = avctx->sample_rate;
        }

        side= av_packet_get_side_data(avci->last_pkt_props, AV_PKT_DATA_SKIP_SAMPLES, &side_size);
        //跳过skip_samples帧数
        if(side && side_size>=10) {
            avci->skip_samples = AV_RL32(side) * avci->skip_samples_multiplier;
            discard_padding = AV_RL32(side + 4);
            av_log(avctx, AV_LOG_DEBUG, "skip %d / discard %d samples due to side data\n",
                   avci->skip_samples, (int)discard_padding);
            skip_reason = AV_RL8(side + 8);
            discard_reason = AV_RL8(side + 9);
        }

        if ((frame->flags & AV_FRAME_FLAG_DISCARD) && got_frame &&
            !(avctx->flags2 & AV_CODEC_FLAG2_SKIP_MANUAL)) {
            avci->skip_samples = FFMAX(0, avci->skip_samples - frame->nb_samples);
            got_frame = 0;
            *discarded_samples += frame->nb_samples;
        }

        if (avci->skip_samples > 0 && got_frame &&
            !(avctx->flags2 & AV_CODEC_FLAG2_SKIP_MANUAL)) {
            if(frame->nb_samples <= avci->skip_samples){
                got_frame = 0;
                *discarded_samples += frame->nb_samples;
                avci->skip_samples -= frame->nb_samples;
                av_log(avctx, AV_LOG_DEBUG, "skip whole frame, skip left: %d\n",
                       avci->skip_samples);
            } else {
                av_samples_copy(frame->extended_data, frame->extended_data, 0, avci->skip_samples,
                                frame->nb_samples - avci->skip_samples, avctx->channels, frame->format);
                if(avctx->pkt_timebase.num && avctx->sample_rate) {
                    int64_t diff_ts = av_rescale_q(avci->skip_samples,
                                                   (AVRational){1, avctx->sample_rate},
                                                   avctx->pkt_timebase);
                    if(frame->pts!=AV_NOPTS_VALUE)
                        frame->pts += diff_ts;
#if FF_API_PKT_PTS
FF_DISABLE_DEPRECATION_WARNINGS
                    if(frame->pkt_pts!=AV_NOPTS_VALUE)
                        frame->pkt_pts += diff_ts;
FF_ENABLE_DEPRECATION_WARNINGS
#endif
                    if(frame->pkt_dts!=AV_NOPTS_VALUE)
                        frame->pkt_dts += diff_ts;
                    if (frame->pkt_duration >= diff_ts)
                        frame->pkt_duration -= diff_ts;
                } else {
                    av_log(avctx, AV_LOG_WARNING, "Could not update timestamps for skipped samples.\n");
                }
                av_log(avctx, AV_LOG_DEBUG, "skip %d/%d samples\n",
                       avci->skip_samples, frame->nb_samples);
                *discarded_samples += avci->skip_samples;
                frame->nb_samples -= avci->skip_samples;
                avci->skip_samples = 0;
            }
        }

        if (discard_padding > 0 && discard_padding <= frame->nb_samples && got_frame &&
            !(avctx->flags2 & AV_CODEC_FLAG2_SKIP_MANUAL)) {
            if (discard_padding == frame->nb_samples) {
                *discarded_samples += frame->nb_samples;
                got_frame = 0;
            } else {
                if(avctx->pkt_timebase.num && avctx->sample_rate) {
                    int64_t diff_ts = av_rescale_q(frame->nb_samples - discard_padding,
                                                   (AVRational){1, avctx->sample_rate},
                                                   avctx->pkt_timebase);
                    frame->pkt_duration = diff_ts;
                } else {
                    av_log(avctx, AV_LOG_WARNING, "Could not update timestamps for discarded samples.\n");
                }
                av_log(avctx, AV_LOG_DEBUG, "discard %d/%d samples\n",
                       (int)discard_padding, frame->nb_samples);
                frame->nb_samples -= discard_padding;
            }
        }

        if ((avctx->flags2 & AV_CODEC_FLAG2_SKIP_MANUAL) && got_frame) {
            AVFrameSideData *fside = av_frame_new_side_data(frame, AV_FRAME_DATA_SKIP_SAMPLES, 10);
            if (fside) {
                AV_WL32(fside->data, avci->skip_samples);
                AV_WL32(fside->data + 4, discard_padding);
                AV_WL8(fside->data + 8, skip_reason);
                AV_WL8(fside->data + 9, discard_reason);
                avci->skip_samples = 0;
            }
        }
    }

    if (avctx->codec->type == AVMEDIA_TYPE_AUDIO &&
        !avci->showed_multi_packet_warning &&
        ret >= 0 && ret != pkt->size && !(avctx->codec->capabilities & AV_CODEC_CAP_SUBFRAMES)) {
        av_log(avctx, AV_LOG_WARNING, "Multiple frames in a packet.\n");
        avci->showed_multi_packet_warning = 1;
    }

    if (!got_frame)
        av_frame_unref(frame);

    if (ret >= 0 && avctx->codec->type == AVMEDIA_TYPE_VIDEO && !(avctx->flags & AV_CODEC_FLAG_TRUNCATED))
        ret = pkt->size;

#if FF_API_AVCTX_TIMEBASE
    if (avctx->framerate.num > 0 && avctx->framerate.den > 0)
        avctx->time_base = av_inv_q(av_mul_q(avctx->framerate, (AVRational){avctx->ticks_per_frame, 1}));
#endif

    /* do not stop draining when actual_got_frame != 0 or ret < 0 */
    /* got_frame == 0 but actual_got_frame != 0 when frame is discarded */
    if (avci->draining && !actual_got_frame) {
        if (ret < 0) {
            /* prevent infinite loop if a decoder wrongly always return error on draining */
            /* reasonable nb_errors_max = maximum b frames + thread count */
            int nb_errors_max = 20 + (HAVE_THREADS && avctx->active_thread_type & FF_THREAD_FRAME ?
                                avctx->thread_count : 1);

            if (avci->nb_draining_errors++ >= nb_errors_max) {
                av_log(avctx, AV_LOG_ERROR, "Too many errors when draining, this is a bug. "
                       "Stop draining and force EOF.\n");
                avci->draining_done = 1;
                ret = AVERROR_BUG;
            }
        } else {
            avci->draining_done = 1;
        }
    }

#if FF_API_OLD_ENCDEC
    avci->compat_decode_consumed += ret;
#endif

    if (ret >= pkt->size || ret < 0) {
        av_packet_unref(pkt);
        av_packet_unref(avci->last_pkt_props);
    } else {
        int consumed = ret;

        pkt->data                += consumed;
        pkt->size                -= consumed;
        avci->last_pkt_props->size -= consumed; // See extract_packet_props() comment.
        pkt->pts                  = AV_NOPTS_VALUE;
        pkt->dts                  = AV_NOPTS_VALUE;
        avci->last_pkt_props->pts = AV_NOPTS_VALUE;
        avci->last_pkt_props->dts = AV_NOPTS_VALUE;
    }

    if (got_frame)
        av_assert0(frame->buf[0]);

    return ret < 0 ? ret : 0;
}

ff_thread_decode_frame 源码

多线程解码实现，在此之前，通过需要先通过调用avcodec_open2创建多个线程。
然后在这个函数中，先调用submit_packet()函数提交packet到下一个解码线程，然后调用数组中最前面线程进行解码。相关代码如下：

int ff_thread_decode_frame(AVCodecContext *avctx,
                           AVFrame *picture, int *got_picture_ptr,
                           AVPacket *avpkt)
{
    FrameThreadContext *fctx = avctx->internal->thread_ctx;
    int finished = fctx->next_finished;
    PerThreadContext *p;
    int err;

    /* release the async lock, permitting blocked hwaccel threads to
     * go forward while we are in this function */
    async_unlock(fctx);

    /*
     * Submit a packet to the next decoding thread.
     */

    p = &fctx->threads[fctx->next_decoding];
    // PerThreadContext是对应线程的上下文，这是在调用avcodec_open2时候创建的。
    // 这里是把avpkt转移到p->avpkt，然后触发PerThreadContext的input_cond信号量，告诉对应的解码线程，可以开始解码了。
    // 具体的解码实现在pthread_frame.c文件中的frame_worker_thread函数。
    err = submit_packet(p, avctx, avpkt);
    if (err)
        goto finish;

    /*
     * If we're still receiving the initial packets, don't return a frame.
     */

    if (fctx->next_decoding > (avctx->thread_count-1-(avctx->codec_id == AV_CODEC_ID_FFV1)))
        fctx->delaying = 0;

    if (fctx->delaying) {
        *got_picture_ptr=0;
        if (avpkt->size) {
            err = avpkt->size;
            goto finish;
        }
    }

    /*
     * Return the next available frame from the oldest thread.
     * If we're at the end of the stream, then we have to skip threads that
     * didn't output a frame/error, because we don't want to accidentally signal
     * EOF (avpkt->size == 0 && *got_picture_ptr == 0 && err >= 0).
     */

    do {
        p = &fctx->threads[finished++];
		//上面通过调用submit_packet提交AVPacket给解码线程后，这里就等待output_cond完成
        if (atomic_load(&p->state) != STATE_INPUT_READY) {
            pthread_mutex_lock(&p->progress_mutex);
            while (atomic_load_explicit(&p->state, memory_order_relaxed) != STATE_INPUT_READY)
                pthread_cond_wait(&p->output_cond, &p->progress_mutex);
            pthread_mutex_unlock(&p->progress_mutex);
        }
		//获取解码后的frame，然后把frame给到picture。
        av_frame_move_ref(picture, p->frame);
        *got_picture_ptr = p->got_frame;
        picture->pkt_dts = p->avpkt->dts;
        err = p->result;

        /*
         * A later call with avkpt->size == 0 may loop over all threads,
         * including this one, searching for a frame/error to return before being
         * stopped by the "finished != fctx->next_finished" condition.
         * Make sure we don't mistakenly return the same frame/error again.
         */
        p->got_frame = 0;
        p->result = 0;

        if (finished >= avctx->thread_count) finished = 0;
    } while (!avpkt->size && !*got_picture_ptr && err >= 0 && finished != fctx->next_finished);

    update_context_from_thread(avctx, p->avctx, 1);

    if (fctx->next_decoding >= avctx->thread_count) fctx->next_decoding = 0;

    fctx->next_finished = finished;

    /* return the size of the consumed packet if no error occurred */
    if (err >= 0)
        err = avpkt->size;
finish:
    async_lock(fctx);
    return err;
}

Adonis_sz

关注

1
点赞
踩
6

收藏

觉得还不错? 一键收藏
2
评论
从头用脚分析FFmpeg源码 - avcodec_send_packet | avcodec_receive_frame

然后通过判断avci->buffer_frame->buf[0]是否null来决定是否调用decode_receive_frame_internal来接受解码后的frame。需要注意的是，AVCodecContext必须经过avcodec_open2函数打开，输入的AVPacket会在内部增加一个ref，所以如果要free，外部也应该调用av_packet_unref。avcodec_send_packet和avcodec_receive_frame中最核心的函数，大部分的编码格式都会调用到这里解码。
复制链接

扫一扫