-
- *Copyright(c)2016,烟台大学计算机与控制工程学院
- *All right reserved.
- *文件名称:停车场模拟.cpp
- *作者:宋雨静
- *完成日期;2015年10月20日
- *版本号;v1.0
- *
- *问题描述:
- 设停车场是一个可停放n辆汽车的狭长死胡同,南边封口,汽车只能从北边进出(这样的停车场世间少有)。
- 汽车在停车场内按车辆到达时间的先后顺序,最先到达的第一辆车停放在车场的最南端,
- 依次向北排开。若车场内已停满n辆汽车,则后来的汽车只能在门外的候车场上等候,一旦有车开走,
- 则排在候车场上的第一辆车即可开入。当停车场内某辆车要离开时,
- 在它之后进入的车辆必须先退出车场为它让路(假定停车场内设有供车辆进出的便道,所有的司机也必须在车内随时待命),
- 待该辆车开出外,其他车辆再按原次序进入车场。每辆停放在车场的车在它离开停车场时,要按停留的时间长短交纳费用。
- 试为停车场编制按上述要求进行管理的模拟程序。
- 这里写图片描述
- 提示:
- 以栈模拟停车场,以队列模拟车场外的候车场,有车离开时,供车辆进出的便道也应该用栈表示。
- 按照从键盘读入的输入数据序列进行模拟管理。
- 汽车到达和离开时,每一组输入数据包括汽车牌照号码(设为整数)以及到达或离去的时刻(为简单化,也设为整数,如1,代表停车场开始营业的第1小时)。
- 对每一组输入数据进行操作后的输出信息为:若是车辆到达,则输出汽车在停车场内或修车场上的停车位置;
- 若是车辆离去,则输出汽车在停车场内停留的时间和应交纳的费用(在候车场上停留的时间不收费)。
- 栈以顺序结构实现,队列以链表结构实现。
- *输入描述:根据要求输入数字
- *程序输出:根据输入的数字判断停车场与候车场的情况
- */
- #include <stdio.h>
- #include <malloc.h>
- #define N 3 /*停车场内最多的停车数*/
- #define M 4 /*候车场内最多的停车数*/
- #define Price 2 /*每单位时间停车费用*/
- typedef struct
- {
- int CarNo[N]; /*车牌号*/
- int CarTime[N]; /*进场时间*/
- int top; /*栈指针*/
- } SqStack; /*定义顺序栈类型,用于描述停车场*/
- typedef struct
- {
- int CarNo[M]; /*车牌号*/
- int front,rear; /*队首和队尾指针*/
- } SqQueue; /*定义循环队类型,用于描述候车场*/
- /*以下为顺序栈的基本运算算法*/
- void InitStack(SqStack *&s)
- {
- s=(SqStack *)malloc(sizeof(SqStack));
- s->top=-1;
- }
- int StackEmpty(SqStack *s)
- {
- return(s->top==-1);
- }
- int StackFull(SqStack *s)
- {
- return(s->top==N-1);
- }
- int Push(SqStack *&s,int e1,int e2)
- {
- if (s->top==N-1)
- return 0;
- s->top++;
- s->CarNo[s->top]=e1;
- s->CarTime[s->top]=e2;
- return 1;
- }
- int Pop(SqStack *&s,int &e1,int &e2)
- {
- if (s->top==-1)
- return 0;
- e1=s->CarNo[s->top];
- e2=s->CarTime[s->top];
- s->top--;
- return 1;
- }
- void DispStack(SqStack *s)
- {
- int i;
- for (i=s->top; i>=0; i--)
- printf("%d ",s->CarNo[i]);
- printf("\n");
- }
- /*以下为循环队列的基本运算算法*/
- void InitQueue(SqQueue *&q)
- {
- q=(SqQueue *)malloc (sizeof(SqQueue));
- q->front=q->rear=0;
- }
- int QueueEmpty(SqQueue *q)
- {
- return(q->front==q->rear);
- }
- int QueueFull(SqQueue *q) /*判断队满*/
- {
- return ((q->rear+1)%M==q->front);
- }
- int enQueue(SqQueue *&q,int e) /*进队*/
- {
- if ((q->rear+1)%M==q->front) /*队满*/
- return 0;
- q->rear=(q->rear+1)%M;
- q->CarNo[q->rear]=e;
- return 1;
- }
- int deQueue(SqQueue *&q,int &e) /*出队*/
- {
- if (q->front==q->rear) /*队空的情况*/
- return 0;
- q->front=(q->front+1)%M;
- e=q->CarNo[q->front];
- return 1;
- }
- void DispQueue(SqQueue *q) /*输出队中元素*/
- {
- int i;
- i=(q->front+1)%M;
- printf("%d ",q->CarNo[i]);
- while ((q->rear-i+M)%M>0)
- {
- i=(i+1)%M;
- printf("%d ",q->CarNo[i]);
- }
- printf("\n");
- }
- //main函数用于模拟停车场的工作
- int main()
- {
- int comm;
- int no,e1,time,e2;
- int i,j;
- SqStack *St,*St1; //St是停车场,St1是在有车离开时,记录为该车移开位置的车辆
- SqQueue *Qu; //Qu是候车场
- InitStack(St);
- InitStack(St1);
- InitQueue(Qu);
- do
- {
- printf("输入指令(1:到达 2:离开 3:显示停车场 4:显示候车场 0:退出):");
- scanf("%d",&comm);
- switch(comm)
- {
- case 1: /*汽车到达*/
- printf("输入车号和时间(设车号和时间均为整数): ");
- scanf("%d%d",&no,&time);
- if (!StackFull(St)) /*停车场不满*/
- {
- Push(St,no,time);
- printf(" >>停车场位置:%d\n",St->top+1);
- }
- else /*停车场满*/
- {
- if (!QueueFull(Qu)) /*候车场不满*/
- {
- enQueue(Qu,no);
- printf(" >>候车场位置:%d\n",Qu->rear);
- }
- else
- printf(" >>候车场已满,不能停车\n");
- }
- break;
- case 2: /*汽车离开*/
- printf("输入车号和时间(设车号和时间均为整数): ");
- scanf("%d%d",&no,&time);
- for (i=0; i<=St->top && St->CarNo[i]!=no; i++); //在栈中找
- if (i>St->top)
- printf(" >>未找到该编号的汽车\n");
- else
- {
- for (j=i; j<=St->top; j++)
- {
- Pop(St,e1,e2);
- Push(St1,e1,e2); /*倒车到临时栈St1中*/
- }
- Pop(St,e1,e2); /*该汽车离开*/
- printf(" >>%d汽车停车费用:%d\n",no,(time-e2)*Price);
- while (!StackEmpty(St1)) /*将临时栈St1重新回到St中*/
- {
- Pop(St1,e1,e2);
- Push(St,e1,e2);
- }
- if (!QueueEmpty(Qu)) /*队不空时,将队头进栈St*/
- {
- deQueue(Qu,e1);
- Push(St,e1,time); /*以当前时间开始计费*/
- }
- }
- break;
- case 3: /*显示停车场情况*/
- if (!StackEmpty(St))
- {
- printf(" >>停车场中的车辆:"); /*输出停车场中的车辆*/
- DispStack(St);
- }
- else
- printf(" >>停车场中无车辆\n");
- break;
- case 4: /*显示候车场情况*/
- if (!QueueEmpty(Qu))
- {
- printf(" >>候车场中的车辆:"); /*输出候车场中的车辆*/
- DispQueue(Qu);
- }
- else
- printf(" >>候车场中无车辆\n");
- break;
- case 0: /*结束*/
- if (!StackEmpty(St))
- {
- printf(" >>停车场中的车辆:"); /*输出停车场中的车辆*/
- DispStack(St);
- }
- if (!QueueEmpty(Qu))
- {
- printf(" >>候车场中的车辆:"); /*输出候车场中的车辆*/
- DispQueue(Qu);
- }
- break;
- default: /*其他情况*/
- printf(" >>输入的命令错误\n");
- break;
- }
- }
- while(comm!=0);
- return 0;
- }
运行结果:
第七周项目六 停车场模拟
最新推荐文章于 2019-04-04 20:35:00 发布
-
运行结果: