netcat
Command Summary:
command | 解释 |
---|---|
-4 | Use IPv4 |
-6 | Use IPv6 |
-b | Allow broadcast |
-C | Send CRLF as line-ending |
-D | Enable the debug socket option |
-d | Detach from stdin |
-F | Pass socket fd |
-h | This help text |
-I length | TCP receive buffer length |
-i interval | Delay interval for lines sent, ports scanned |
-k | Keep inbound sockets open for multiple connects |
-l | Listen mode, for inbound connects |
-M ttl | Outgoing TTL / Hop Limit |
-m minttl | Minimum incoming TTL / Hop Limit |
-N | Shutdown the network socket after EOF on stdin |
-n | Suppress name/port resolutions |
-O length | TCP send buffer length |
-P proxyuser | Username for proxy authentication |
-p port | Specify local port for remote connects |
-q secs | quit after EOF on stdin and delay of secs |
-r | Randomize remote ports |
-S | Enable the TCP MD5 signature option |
-s source | Local source address |
-T | keyword TOS value |
-t | Answer TELNET negotiation |
-U | Use UNIX domain socket |
-u | UDP mode |
-V rtable | Specify alternate routing table |
-v | Verbose |
-W recvlimit | Terminate after receiving a number of packets |
-w timeout | Timeout for connects and final net reads |
-X proto | Proxy protocol: “4”, “5” (SOCKS) or “connect” |
-x addr[:port] | Specify proxy address and port |
-Z | DCCP mode |
-z | Zero-I/O mode [used for scanning] |
常用 nc -vzw 1 61.135.169.125 80
查看开放端口