elasticsearch集群无法启动正常情况（ECS服务器）

因为之前项目中都是使用一台做es服务器（没有资源做集群的），今天特意从阿里云上买了2台低配置的机器做练手用，下面记一下ES集群启动遇到的问题：

1、elasticsearch.yml的配置（主节点的配置）

	# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: es_cluster
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-1
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
#network.host: 192.168.0.1
network.host: 0.0.0.0
http.port: 9200
transport.tcp.port: 9300
#
# Set a custom port for HTTP:
#
#http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when new node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.zen.ping.unicast.hosts: ["47.100.222.11:9300"]
#
# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
#
discovery.zen.minimum_master_nodes: 1
#
# For more information, consult the zen discovery module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true  
http.cors.allow-origin: "*"

2、elasticsearch.yml（数据节点的配置）

# ======================== Elasticsearch Configuration =========================
    #
    # NOTE: Elasticsearch comes with reasonable defaults for most settings.
    #       Before you set out to tweak and tune the configuration, make sure you
    #       understand what are you trying to accomplish and the consequences.
    #
    # The primary way of configuring a node is via this file. This template lists
    # the most important settings you may want to configure for a production cluster.
    #
    # Please consult the documentation for further information on configuration options:
    # https://www.elastic.co/guide/en/elasticsearch/reference/index.html
    #
    # ---------------------------------- Cluster -----------------------------------
    #
    # Use a descriptive name for your cluster:
    #集群名称
    cluster.name: es_cluster
    #
    # ------------------------------------ Node ------------------------------------
    #
    # Use a descriptive name for the node:
    #节点名称
    node.name: node-2
    #
    # Add custom attributes to the node:
    #
    #node.attr.rack: r1
    #
    # ----------------------------------- Paths ------------------------------------
    #
    # Path to directory where to store the data (separate multiple locations by comma):
    #
    #path.data: /path/to/data
    #
    # Path to log files:
    #
    #path.logs: /path/to/logs
    #
    # ----------------------------------- Memory -----------------------------------
    #
    # Lock the memory on startup:
    #
    #bootstrap.memory_lock: true
    #
    # Make sure that the heap size is set to about half the memory available
    # on the system and that the owner of the process is allowed to use this
    # limit.
    #
    # Elasticsearch performs poorly when the system is swapping the memory.
    #
    # ---------------------------------- Network -----------------------------------
    #
    # Set the bind address to a specific IP (IPv4 or IPv6):
    #
    #network.host: 192.168.0.1
    #
    # Set a custom port for HTTP:
    network.host: 0.0.0.0
    http.port: 9200
    transport.tcp.port: 9300
    #
    # For more information, consult the network module documentation.
    #
    # --------------------------------- Discovery ----------------------------------
    #
    # Pass an initial list of hosts to perform discovery when new node is started:
    # The default list of hosts is ["127.0.0.1", "[::1]"]
    #
    discovery.zen.ping.unicast.hosts: ["47.100.222.11:9300"]
    #
    # Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
    #
    discovery.zen.minimum_master_nodes: 2
    #
    # For more information, consult the zen discovery module documentation.
    #
    # ---------------------------------- Gateway -----------------------------------
    #
    # Block initial recovery after a full cluster restart until N nodes are started:
    #
    #gateway.recover_after_nodes: 3
    #
    # For more information, consult the gateway module documentation.
    #
    # ---------------------------------- Various -----------------------------------
    #
    # Require explicit names when deleting indices:
    #
    #action.destructive_requires_name: true

3、启动节点，第一台启动成功，第二台连接不上集群

原因分析：第一台发布时绑定的发布地址是内网地址，第二台机器默认访问第一台电脑的发布地址，由于两台服务器不是内网相通的，只能通过外网访问，所以第二台机器连接不上集群。

4、解决方案

手动配置第一台主节点的发布地址，将发布地址设置成外网地址即可
在主节点的elasticsearch.yml中增加内容
network.publish_host: 47.100.222.11

重新启动，成功！！

参考文档
https://www.cnblogs.com/liuchuanfeng/articles/7059268.html
https://bbs.aliyun.com/read/324048.html

祝好运！！