CHAP 认证配置

CHAP 认证配置
3.1 问题
如图配置 设备 IP 地址
配置 R1 为认证端，R2为被认证端
认证方式为 CHAP，用户名为 Cisco ，密码为 CCIE
3.2 方案
搭建实验环境，如图-3所示。

图-3

3.3 步骤
实现此案例需要按照如下步骤进行。

1）配置接口IP地址

<Huawei>undo terminal monitor 
<Huawei>system-view 
[Huawei]sysname R1
[R1]interface Pos 6/0/0
[R1-Pos6/0/0]ip address  100.1.1.1 24
[R1-Pos6/0/0]quit
<Huawei>undo terminal monitor 
<Huawei>system-view 
[Huawei]sysname R2
[R2]interface Pos 6/0/0
[R2-Pos6/0/0]ip address  100.1.1.2 24
[R2-Pos6/0/0]quit

2）配置被认证端 – R2

[R2]interface Pos 6/0/0
[R2-Pos6/0/0] ppp chap user Cisco
[R2-Pos6/0/0] ppp chap password cipher CCIE
[R2-Pos6/0/0] quit

3）配置认证端 – R1

[R1]aaa
[R1-aaa]local-user Cisco password cipher CCIE
[R1-aaa]local-user Cisco service-type ppp 
[R1-aaa]quit
[R1]interface Pos 6/0/0
[R1-Pos6/0/0]ppp authentication-mode chap
[R1-Pos6/0/0]ppp chap user Cisco
[R1-Pos6/0/0]quit

4）测试 R1与R2之间的互通性

[R1]interface Pos 6/0/0
[R1-Pos6/0/0]shutdown
[R1-Pos6/0/0]undo shutdown
<R1>ping 100.1.1.2
  PING 100.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=50 ms
    Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms
  --- 100.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/26/50 ms