1、配置静态IP地址:
# vim /etc/network/interfaces
原内容有如下4行:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
以上表示默认使用DHCP分配IP,修改为如下:
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
#iface eth0 inet dhcp
iface eth0 inet static
address 192.168.80.129
netmask 255.255.255.0
gateway 192.168.80.2
保存退出。
注意:只需要设置address(IP地址)、netmask(子网掩码)、gateway(网关)这三项就OK,network和broadcast这两项参数是可以不写的。