ssm框架基础配置

s-s-m整合(spring springmvc mabatis) 参考

1.导入所需的jar包
2.配置web.xml文件
2.1 spring 的监听
2.2 springmvc前端控制器
2.3 spring 解决中文乱码的过滤器
等
3.配置三大框架的配置文件
3.1 applicationContext.xml (spring)
3.2 spring-servlet.xml (springmvc)
3.3 mybatis-config.xml (mybatis)


4. jdbc.properties 配置文件 这里数据源链接使用的c3p0

web.xml的基本配置
注意了:配置文件一定要和web.xml中的配置名字一样
<!-- spring监听器 -->
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>classpath:applicationContext.xml</param-value>
</context-param>

<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<!-- springmvc前端控制器 -->
<servlet>
<servlet-name>spring</servlet-name>
<servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
<init-param>
<param-name>contextConfigLocation</param-name>
<param-value>classpath:spring-servlet.xml</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>spring</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<!-- spring解决中文乱码的过滤器 -->
<filter>
<filter-name>characterEncodingFilter</filter-name>
<filter-class>org.springframework.web.filter.CharacterEncodingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>UTF-8</param-value>
</init-param>
<init-param>
<param-name>forceEncoding</param-name>
<param-value>true</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>characterEncodingFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>

以下为三打框架的配置文件参考
*******************************************************************************************************************
1. applicationContext.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:p="http://www.springframework.org/schema/p"
xmlns:tx="http://www.springframework.org/schema/tx"
xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.5.xsd
http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.5.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">

<!-- Properties文件读取配置，base的properties -->
<context:property-placeholder location="classpath:jdbc.properties" />

<!-- data source -->
<bean id="dataSource"
class="com.mchange.v2.c3p0.ComboPooledDataSource">
<property name="driverClass" value="${datasource.driverClassName}"></property>
<property name="jdbcUrl" value="${datasource.url}"></property>
<property name="user" value="${datasource.username}"></property>
<property name="password" value="${datasource.password}"></property>
<!--当连接池中的连接耗尽的时候c3p0一次同时获取的连接数。Default: 3 -->
<property name="acquireIncrement" value="${c3p0.acquireIncrement}"></property>
<!--初始化时获取三个连接，取值应在minPoolSize与maxPoolSize之间。Default: 3 -->
<property name="initialPoolSize" value="${c3p0.initialPoolSize}"></property>
<property name="minPoolSize" value="${c3p0.minPoolSize}"></property>
<property name="maxPoolSize" value="${c3p0.maxPoolSize}"></property>
<!--最大空闲时间,60秒内未使用则连接被丢弃。若为0则永不丢弃。Default: 0 -->
<property name="maxIdleTime" value="${c3p0.maxIdleTime}"></property>
<!--每60秒检查所有连接池中的空闲连接。Default: 0 -->
<property name="idleConnectionTestPeriod" value="${c3p0.idleConnectionTestPeriod}"></property>
<!-- JDBC的标准参数，用以控制数据源内加载的PreparedStatements数量。但由于预缓存的statements
属于单个connection而不是整个连接池。所以设置这个参数需要考虑到多方面的因素。
如果maxStatements与maxStatementsPerConnection均为0，则缓存被关闭。Default: 0-->
<property name="maxStatements" value="${c3p0.maxStatements}"></property>
<!-- c3p0是异步操作的，缓慢的JDBC操作通过帮助进程完成。扩展这些操作可以有效的提升性能 通过
多线程实现多个操作同时被执行。Default: 3-->
<property name="numHelperThreads" value="${c3p0.numHelperThreads}"></property>
</bean>

<!-- 定义 SqlSessionFactory -->
<bean id="sqlSessionFactory" class="org.mybatis.spring.SqlSessionFactoryBean"
scope="singleton">
<property name="dataSource" ref="dataSource" />
<property name="configLocation" value="classpath:mybatis-config.xml" />
</bean>

<!-- (事务管理)transaction manager, use JtaTransactionManager for global tx -->
<bean id="transactionManager"
class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
<property name="dataSource" ref="dataSource" />
</bean>

<!-- 配置事务通知属性 -->
<tx:advice id="txAdvice" transaction-manager="transactionManager">
<!-- 定义事务传播属性 -->
<tx:attributes>
<tx:method name="insert*" propagation="REQUIRED" />
<tx:method name="update*" propagation="REQUIRED" />
<tx:method name="edit*" propagation="REQUIRED" />
<tx:method name="save*" propagation="REQUIRED" />
<tx:method name="add*" propagation="REQUIRED" />
<tx:method name="new*" propagation="REQUIRED" />
<tx:method name="set*" propagation="REQUIRED" />
<tx:method name="remove*" propagation="REQUIRED" />
<tx:method name="delete*" propagation="REQUIRED" />
<tx:method name="change*" propagation="REQUIRED" />
<tx:method name="get*" propagation="REQUIRED" read-only="true" />
<tx:method name="select*" propagation="REQUIRED" read-only="true" />
<tx:method name="query*" propagation="REQUIRED" read-only="true" />
<tx:method name="find*" propagation="REQUIRED" read-only="true" />
<tx:method name="load*" propagation="REQUIRED" read-only="true" />
<tx:method name="*" propagation="REQUIRED" read-only="true" />
</tx:attributes>
</tx:advice>


<!-- 配置事务切面 -->
<aop:config>
<aop:pointcut id="serviceOperation"
expression="execution(* com.xxxx.xxx.service..*.*(..))" />
<aop:advisor advice-ref="txAdvice" pointcut-ref="serviceOperation" />

</aop:config>


<!-- Mybatis-Spring 会自动为我们注册Mapper对应的MapperFactoryBean对象 -->
<!-- Mapper接口所在包名，Spring会自动查找其下的Mapper -->
<!-- 给所有的dao接口自动添加实现类 -->
<bean class="org.mybatis.spring.mapper.MapperScannerConfigurer">
<property name="basePackage" value="com.xxxx.xxx.dao" />
</bean>

<!-- 自动扫描组件，这里要把controler下面的 controller去除，他们是在springmvc的配置文件中配置的，如果不去除会影响事务管理的。 -->
<context:component-scan base-package="com.xxxx.ssm">
<context:exclude-filter type="annotation" expression="org.springframework.stereotype.Controller" />

</context:component-scan>

</beans>
*********************************************************************************************************************
2.spring-servlet.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:p="http://www.springframework.org/schema/p"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:jee="http://www.springframework.org/schema/jee"
xmlns:tx="http://www.springframework.org/schema/tx"
xmlns:mvc="http://www.springframework.org/schema/mvc"
xsi:schemaLocation="
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-4.2.xsd
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-4.2.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-4.2.xsd
http://www.springframework.org/schema/jee http://www.springframework.org/schema/jee/spring-jee-4.2.xsd
http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-4.2.xsd
http://www.springframework.org/schema/mvc http://www.springframework.org/schema/mvc/spring-mvc-4.2.xsd">

<!-- 扫描包 -->
<context:component-scan base-package="com.wskj.ssm">
<!-- 扫描所有的controller 但是不扫描service-->
<context:include-filter type="annotation" expression="org.springframework.stereotype.Controller" />
<context:exclude-filter type="annotation" expression="org.springframework.stereotype.Service" />
</context:component-scan>

<!-- 启用注解 -->
<mvc:annotation-driven></mvc:annotation-driven>

<!-- 静态资源映射 -->
<mvc:resources location="/resource/" mapping="/static/**"></mvc:resources>
<mvc:resources location="/files/" mapping="/files/**"></mvc:resources>

<!-- 页面解析器。prefix：前缀， suffix：后缀 -->
<bean
class="org.springframework.web.servlet.view.InternalResourceViewResolver">
<property name="prefix" value="/WEB-INF/jsp/" />
<property name="suffix" value=".jsp" />
</bean>

<!-- json的支持 -->
<bean id="messageAdapter"
class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter">
<property name="messageConverters">
<list>
<!-- Support JSON -->
<bean
class="org.springframework.http.converter.json.MappingJackson2HttpMessageConverter" />
</list>
</property>
</bean>


<bean id="exceptionMessageAdapter"
class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerExceptionResolver">
<property name="messageConverters">
<list>
<!-- Support JSON -->
<bean
class="org.springframework.http.converter.json.MappingJackson2HttpMessageConverter" />
</list>
</property>
</bean>

<!-- 文件上传 -->
<bean id="multipartResolver"
class="org.springframework.web.multipart.commons.CommonsMultipartResolver"
p:maxUploadSize="34564356345456"
p:defaultEncoding="utf-8">
<!-- <property name="defaultEncoding" value="utf-8"></property> -->
</bean>

<!-- 配置springmvc的拦截器 -->
<!-- <mvc:interceptors>
<mvc:interceptor> -->
<!-- 设置要拦截的url地址 -->
<!-- <mvc:mapping path="/**"/> -->
<!-- 设置不拦截的url -->
<!-- <mvc:exclude-mapping path="/login.do"/>
<mvc:exclude-mapping path="/static/**"/>
--><!-- 设置拦截器 -->
<!-- <bean class="com.wskj.ssm.interceptors.LoginInterceptor"></bean>
</mvc:interceptor>
</mvc:interceptors> -->

</beans>
******************************************************************************************************************
3.mybatis-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE configuration
PUBLIC "-//mybatis.org//DTD Config 3.0//EN"
"http://mybatis.org/dtd/mybatis-3-config.dtd">

<configuration>
<!-- 参数-->
<settings>
<!-- changes from the defaults -->
<setting name="cacheEnabled" value="false" />
<setting name="useGeneratedKeys" value="true" />
<setting name="defaultExecutorType" value="REUSE" />
<setting name="lazyLoadingEnabled" value="false" />
</settings>

<typeAliases>
<!--这里给实体类取别名，方便在mapper配置文件中使用-->
<package name="com.xxxx.xxx.pojo"/>
</typeAliases>
<!--自动加载mapper配置文件 -->
<mappers>
<package name="com.xxxx.xxx.dao"/>
</mappers>

</configuration>
***************************************************************************************************************
4. jdbc.properties 配置文件（可以直接写在spring的配置文件中）
datasource.driverClassName=com.mysql.jdbc.Driver
datasource.url=jdbc:mysql://192.168.1.1:3306/shoppingdb
datasource.username=root
datasource.password=123456
c3p0.acquireIncrement=3
c3p0.initialPoolSize=3
c3p0.idleConnectionTestPeriod=60
c3p0.minPoolSize=5
c3p0.maxPoolSize=100
c3p0.maxStatements=100
c3p0.numHelperThreads=10
c3p0.maxIdleTime=60
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
mybatis 貌似是没有级联操作
这里分享个技巧
jdbc.properties中的url地址最后加上allowMultiQueries=true
url=jdbc:mysql://192.168.1.1:3306/liubao2?useUnicode=true&characterencoding=utf8&allowMultiQueries=true

让mysql驱动默认开启批量操作
然后就可以这样写了
<delete id="deletephotoalbumbyid" parameterType="java.lang.Integer">
delete from photos where xid=#{id};
delete from photoalbum where xid=#{id}
</delete>
这样就可以同时执行两条sql语句了
*****************************************************************************************************************
其实都是细节性的问题,细节决定成败!!!
--奋斗中的刘阿宝