常量和属性
/*************************常量********************************/
//默认初始化容量,容量必须是2的幂
static final int DEFAULT_INITIAL_CAPACITY = 1 << 4; // aka 16
//最大容量,2^31
static final int MAXIMUM_CAPACITY = 1 << 30;
//默认的负载因子
static final float DEFAULT_LOAD_FACTOR = 0.75f;
//树化的临界值。大于8,由链表转红黑树
static final int TREEIFY_THRESHOLD = 8;
//拆分红黑树临界值。小于6,由红黑树转链表
static final int UNTREEIFY_THRESHOLD = 6;
//桶中结构转化为红黑树对应的table的最小数量
static final int MIN_TREEIFY_CAPACITY = 64;
/**************************属性*******************************/
//桶,存储元素的数组,总是2的幂次倍
transient Node<K,V>[] table;
//存放具体元素的集
transient Set<Map.Entry<K,V>> entrySet;
// 元素的个数,包含链表和红黑树中的元素
transient int size;
// 每次扩容和更改map结构的计数器
transient int modCount;
// 临界值 当实际大小(容量*填充因子)超过临界值时,会进行扩容
int threshold;
// 填充因子
final float loadFactor;
构造方法
//无参构造方法,只对loadFactor属性进行了赋值
public HashMap() {
this.loadFactor = DEFAULT_LOAD_FACTOR; // all other fields defaulted
}
//构造方法调用
public HashMap(int initialCapacity) {
this(initialCapacity, DEFAULT_LOAD_FACTOR);
}
//真正的双参数构造方法
public HashMap(int initialCapacity, float loadFactor) {
// 初始容量不能小于0,否则报错
if (initialCapacity < 0)
throw new IllegalArgumentException("Illegal initial capacity: " +
initialCapacity);
// 初始容量不能大于最大值,否则为最大值
if (initialCapacity > MAXIMUM_CAPACITY)
initialCapacity = MAXIMUM_CAPACITY;
// 填充因子不能小于或等于0,不能为非数字
if (loadFactor <= 0 || Float.isNaN(loadFactor))
throw new IllegalArgumentException("Illegal load factor: " +
loadFactor);
// 初始化填充因子
this.loadFactor = loadFactor;
// 初始化threshold大小
this.threshold = tableSizeFor(initialCapacity);
}
内置类
Node<K,V>
/**
* hashMap子节点
* Basic hash bin node, used for most entries. (See below for
* TreeNode subclass, and in LinkedHashMap for its Entry subclass.)
*/
static class Node<K,V> implements Map.Entry<K,V> {
final int hash;
final K key;
V value;
Node<K,V> next;
Node(int hash, K key, V value, Node<K,V> next) {
this.hash = hash;
this.key = key;
this.value = value;
this.next = next;
}
public final K getKey() { return key; }
public final V getValue() { return value; }
public final String toString() { return key + "=" + value; }
public final int hashCode() {
return Objects.hashCode(key) ^ Objects.hashCode(value);
}
public final V setValue(V newValue) {
V oldValue = value;
value = newValue;
return oldValue;
}
public final boolean equals(Object o) {
if (o == this)
return true;
if (o instanceof Map.Entry) {
Map.Entry<?,?> e = (Map.Entry<?,?>)o;
if (Objects.equals(key, e.getKey()) &&
Objects.equals(value, e.getValue()))
return true;
}
return false;
}
}
方法
tableSizeFor方法
/**
* Returns a power of two size for the given target capacity.
*/
static final int tableSizeFor(int cap) {
int n = cap - 1;
n |= n >>> 1;
n |= n >>> 2;
n |= n >>> 4;
n |= n >>> 8;
n |= n >>> 16;
return (n < 0) ? 1 : (n >= MAXIMUM_CAPACITY) ? MAXIMUM_CAPACITY : n + 1;
}
reSize方法
/**
* Initializes or doubles table size. If null, allocates in
* accord with initial capacity target held in field threshold.
* Otherwise, because we are using power-of-two expansion, the
* elements from each bin must either stay at same index, or move
* with a power of two offset in the new table.
*
* 为什么需要扩容?
* 为了解决哈希冲突导致的链化影响查询效率的问题,扩容会缓解该问题。
*
* @return the table
*/
final Node<K,V>[] resize() {
//oldTab:引用扩容前的哈希表
Node<K,V>[] oldTab = table;
//oldCap:表示扩容之前table数组的长度
int oldCap = (oldTab == null) ? 0 : oldTab.length;
//oldThr:表示扩容之前的扩容阈值,触发本次扩容的阈值
int oldThr = threshold;
//newCap:扩容之后table数组的大小
//newThr:扩容之后,下次再次触发扩容的条件
int newCap, newThr = 0;
//条件如果成立说明 hashMap中的散列表已经初始化过了,这是一次正常扩容
if (oldCap > 0) {
//扩容之前的table数组大小已经达到 最大阈值后,则不扩容,且设置扩容条件为 int 最大值。
if (oldCap >= MAXIMUM_CAPACITY) {
threshold = Integer.MAX_VALUE;
return oldTab;
}
//oldCap左移一位实现数值翻倍,并且赋值给newCap, newCap 小于数组最大值限制 且 扩容之前的阈值 >= 16
//这种情况下,则 下一次扩容的阈值 等于当前阈值翻倍
else if ((newCap = oldCap << 1) < MAXIMUM_CAPACITY &&
oldCap >= DEFAULT_INITIAL_CAPACITY)
newThr = oldThr << 1; // double threshold
}
//oldCap == 0,说明hashMap中的散列表是null
//1.new HashMap(initCap, loadFactor);
//2.new HashMap(initCap);
//3.new HashMap(map); 并且这个map有数据
else if (oldThr > 0) // initial capacity was placed in threshold
newCap = oldThr;
//oldCap == 0,oldThr == 0
//new HashMap();
else { // zero initial threshold signifies using defaults
newCap = DEFAULT_INITIAL_CAPACITY;//16
newThr = (int)(DEFAULT_LOAD_FACTOR * DEFAULT_INITIAL_CAPACITY);//12
}
//newThr为零时,通过newCap和loadFactor计算出一个newThr
if (newThr == 0) {
float ft = (float)newCap * loadFactor;
newThr = (newCap < MAXIMUM_CAPACITY && ft < (float)MAXIMUM_CAPACITY ?
(int)ft : Integer.MAX_VALUE);
}
threshold = newThr;
//创建出一个更长 更大的数组
@SuppressWarnings({"rawtypes","unchecked"})
Node<K,V>[] newTab = (Node<K,V>[])new Node[newCap];
table = newTab;
//说明,hashMap本次扩容之前,table不为null
if (oldTab != null) {
for (int j = 0; j < oldCap; ++j) {
//当前node节点
Node<K,V> e;
//说明当前桶位中有数据,但是数据具体是 单个数据,还是链表 还是 红黑树 并不知道
if ((e = oldTab[j]) != null) {
//方便JVM GC时回收内存
oldTab[j] = null;
//第一种情况:当前桶位只有一个元素,从未发生过碰撞,这情况 直接计算出当前元素应存放在 新数组中的位置,然后
//扔进去就可以了
if (e.next == null)
newTab[e.hash & (newCap - 1)] = e;
//第二种情况:当前节点已经树化,本期先不讲,下一期讲,红黑树。QQ群:865-373-238
else if (e instanceof TreeNode)
((TreeNode<K,V>)e).split(this, newTab, j, oldCap);
else { // preserve order
//第三种情况:桶位已经形成链表
//低位链表:存放在扩容之后的数组的下标位置,与当前数组的下标位置一致。
Node<K,V> loHead = null, loTail = null;
//高位链表:存放在扩容之后的数组的下表位置为 当前数组下标位置 + 扩容之前数组的长度
Node<K,V> hiHead = null, hiTail = null;
Node<K,V> next;
do {
next = e.next;
//hash -> .... 1 1111
//hash -> .... 0 1111
//oldCap -> .... 1 0000
/**
*
* 例子:扩容前同一个hash桶里面的node节点,分2种情况。
*
* hash -> 1000 0101 0101 1101
oldCap -> 0000 0000 0000 0111 8
--------------------------------------
0000 0000 0000 0101 index[5]
hash -> 1000 0101 0101 1101
newCap -> 0000 0000 0000 1111 16
--------------------------------------
0000 0000 0000 1101 index[13]
*
*/
if ((e.hash & oldCap) == 0) {
if (loTail == null)
loHead = e;
else
loTail.next = e;
loTail = e;
}
else {
if (hiTail == null)
hiHead = e;
else
hiTail.next = e;
hiTail = e;
}
} while ((e = next) != null);
if (loTail != null) {
loTail.next = null;
newTab[j] = loHead;
}
if (hiTail != null) {
hiTail.next = null;
newTab[j + oldCap] = hiHead;
}
}
}
}
}
return newTab;
}
putVal方法
/**
* Implements Map.put and related methods
*
* @param hash hash for key key经过hash扰动的hash值
* @param key the key
* @param value the value to put
* @param onlyIfAbsent if true, don't change existing value
* @param evict if false, the table is in creation mode.
* @return previous value, or null if none
*/
final V putVal(int hash, K key, V value, boolean onlyIfAbsent, boolean evict) {
//tab:引用当前hashMap的散列表
//p:表示当前散列表的元素
//n:表示散列表数组的长度
//i:表示路由寻址 结果
Node<K,V>[] tab; Node<K,V> p; int n, i;
//延迟初始化逻辑,第一次调用putVal时会初始化hashMap对象中的最耗费内存的散列表
if ((tab = table) == null || (n = tab.length) == 0)
n = (tab = resize()).length;
//最简单的一种情况:寻址找到的桶位 刚好是 null,这个时候,直接将当前k-v=>node 扔进去就可以了
if ((p = tab[i = (n - 1) & hash]) == null)
tab[i] = newNode(hash, key, value, null);
else {
//e:不为null的话,找到了一个与当前要插入的key-value一致的key的元素
//k:表示临时的一个key
Node<K,V> e; K k;
//表示桶位中的该元素,与你当前插入的元素的key完全一致,表示后续需要进行替换操作
if (p.hash == hash &&
((k = p.key) == key || (key != null && key.equals(k))))
e = p;
//表示桶位中的该元素是一个红黑树结构
else if (p instanceof TreeNode)
e = ((TreeNode<K,V>)p).putTreeVal(this, tab, hash, key, value);
else {
//表示桶位中的该元素是一个链表的结构,
for (int binCount = 0; ; ++binCount) {
//条件成立的话,说明迭代到最后一个元素了,也没找到一个与你要插入的key一致的node
//说明需要加入到当前链表的末尾
if ((e = p.next) == null) {
p.next = newNode(hash, key, value, null);
//条件成立,,说明链表长度满足树化标准,需要树化了
//“binCount >= 7”:p从链表.index(0)开始,当binCount == 7时,p.index == 7,newNode.index == 8;
//也就是说,当链表已经有8个节点了,此时再新链上第9个节点,在成功添加了这个新节点之后,立马做链表转红黑树。
if (binCount >= TREEIFY_THRESHOLD - 1) // -1 for 1st
//树化操作
treeifyBin(tab, hash);
break;
}
//条件成立,说明已经找到了相同key的node
if (e.hash == hash &&
((k = e.key) == key || (key != null && key.equals(k))))
break;
p = e;
}
}
//e不等于null,条件成立说明,找到了一个与你插入元素key完全一致的数据,需要进行替换
if (e != null) { // existing mapping for key
V oldValue = e.value;
if (!onlyIfAbsent || oldValue == null)
e.value = value;
afterNodeAccess(e);
return oldValue;
}
}
//modCount:表示散列表结构被修改的次数,替换Node元素的value不计数
++modCount;
//插入新元素,size自增,如果自增后的值大于扩容阈值,则触发扩容。
if (++size > threshold)
resize();
afterNodeInsertion(evict);
return null;
}