Job for network.service failed because the control process exited with error code问题

最新推荐文章于 2024-08-26 10:43:37 发布
最新推荐文章于 2024-08-26 10:43:37 发布
阅读量9.3k 收藏 13
点赞数 9
文章标签： linux 虚拟机 centos
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_38384994/article/details/111413168
版权

在centos7下，输入service network restart 命令，报以下错误 : Job for network.service failed because the control process exited with error code. See “systemctl status network.service” and “journalctl -xe” for details. 下面介绍一下我的解决方法

  1. 在 /etc/sysconfig/network-scripts目录下删除掉别的ifcfg-xxx(只保留一个你网卡同名的文档) 我的是ifcfg-ens33
  2. 配置文件的mac地址可能不匹配，输入 ipaddr查询 (00:0c:29:6a:86:9a) 这个就是mac地址 ,将/etc/sysconfig/network-scripts/ifcfg-xxx中的HWADDR（如果没有就添加上）改成这个MAC地址在这里插入图片描述
    3.停用Networkmanager 服务
    systemctl stop NetworkManager systemctl disable NetworkManager
    4.然后执行systemctl status network.service问题得以解决
苦痛自渡~冷暖自知
关注
Job for network.service failed because the control process exited with error code. See “systemctl st
weixin_38996555的博客
06-02 1万+
Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.一、由于Xshell掉了，重新连接失败。先ping一下，看网络是否通的二、重启network服务，发现报错三、根据提示查看报错信息四、解决方法1.查验配置文件是否错误2.可能与NetworkManage
安装新光口网卡报错：【Job for network.service failed because the control process exited with error code】解决方案
SuYu_Wang的博客
05-09 4694
新装网卡配置后无法启动网络。报错：Job for network.service failed because the control process exited with error code
CentOS7 网卡重启失败！Job for network.service failed because the control process exited with error code...
小驴程序源
10-21 9631
问题描述： CentOS 7 重新设置了IP（static），重新启动网卡时出错。 执行命令：systemctl restart network 或者/etc/rc.d/init.d/network restart 提示：Job for network.service failed because the control process exited with error...
如何解决报错：Job for jenkins.service failed because the control process exited with error code
最新发布
weixin_45754647的博客
08-26 171
使用systemctl和journalctl查看错误信息。检查端口、Java 环境和配置文件。解决问题后重新启动 Jenkins 服务。
Job for network.service failed because the control process exited with error code.
热门推荐
weixin_53572775的博客
08-12 4万+
在我们重启网卡时,发生如下报错: [root@real_server2 network-scripts]# systemctl restart network Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details 首先我们要学会查看报错内容,这句话的
Job for network.service failed because the control process exited with error code. See "systemc的解决办法
Spring Boot-Common On With You
09-22 3万+
问题概述 关于这个问题，博主是在虚拟机迁移的过程中遇到的，迁移完成后，需要对网络进行重新分配，配置完成后，重启网络服务时，报错：“ Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "jou...
Linux虚拟机网络“Job for network.service failed because the control process exited with error code”
天青Azure的博客
10-07 737
问题描述： ping出现Network is unreachable 解决过程： 重启网卡：service network restart ,报错 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. 状态为failed sudo systemctl
Docker报错Job for docker.service failed because the control process exited with error code.
米粥粥的博客
10-14 3903
配置加速镜像之后启动docker一直报错 Job for docker.service failed because the control process exited with error code. See “systemctl status docker.service” and “journalctl -xe” for details. 查看docker状态之后显示如下信息 83906 ...
Job for network. service failed because the control process exited with error code,
08-22
- *1* [Job for network.service failed because the control process exited with error code.](https://blog.csdn.net/weixin_46142986/article/details/130702280)[target="_blank" data-report-click={"spm":...
两行命令解决Job for network.service failed because the control process exited with error code. 问题
qq_46034741的博客
03-22 1万+
在使用linux系统时我们修改network配置后经常要用到systemctl restart network命令重启网卡是修改生效，但是使用这个命令经常会包一下错误 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. 这是什么原因造成的呢？其
Job for network.service failed because the control process exited with error code.报错解决方法
hanyuan_828005的博客
11-12 2万+
centOS 7虚拟机下载修改程序后静态ip会出现报错,报错内容如下: Job for network.service failed because the control process exited with error code.See “systemctl status network.service” and “journalctl -xe” for details(由于控制进程退出并显示错误代码，因此network.service的作业失败。有关详细信息，请参见“ systemctl sta.
解决centos重启网络报错：Job for network.service failed because the control process exited with error code.
MurmanskHarbor的博客
05-13 2798
解决centos重启网络报错：Job for network.service failed because the control process exited with error code.
关于Job for network.service failed because the control process exited with error code.
weixin_69007450的博客
11-13 2万+
关于Job for network.service failed because the control process exited with error code.
虚拟机启动network服务启动失败：ob for network.service failed because the control process exited with error code
伟迷不正的博客
07-10 6808
虚拟机启动network服务启动失败：ob for network.service failed because the control process exited with error code
虚拟机报错：Job for network.service failed because the control process exited with error code
hzp666的博客
04-16 1514
1.错误： 今天又打开虚拟机准备搞大数据集群，由于有段时间没开机，开机后发现连不上网，ifconfig后连ip地址都没了： 2.解决方案： 网上有很多说法，大多都是重新vi /etc/sysconfig/network-scripts/ifcfg-ens33 配置静态ip的, 其实是网卡不工作了，最后只有一种方法管用： 3条指令： 3.原因： 在CentOS系统上，目前有NetworkManager和network两种网络管理工具。如果两种都配置会引起冲突。由于一般我们都是使用 network
解决 Linux 网络 “Job for network.service failed because the control process exite”问题
weixin_45131680的博客
10-27 5194
经常会有人在centOS 7下更改完静态ip后发现network服务重启不了，翻遍了网络，尝试了各种方法，终于解决了。现把各种解决方法归纳整理，希望能让大家少走点歪路。
评论 2
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值