单片机设计_指纹识别系统(AT89C51)

指纹识别系统

想要更多项目私wo!!!

一、电路设计

此电路由最小系统板、LCD1602液晶模块和AS608指纹模块组成。

二、运行效果

三、主代码

/*想要更多项目私wo!!!*/
#include "sys.h"
#include "delay.h"
#include "usart.h"
#include "lcd.h"
#include "key.h"
#include "touch.h"	  
#include "malloc.h" 
#include "usmart.h"  
#include "MMC_SD.h"   
#include "ff.h"  
#include "exfuns.h"    
#include "fontupd.h"
#include "text.h"	
#include "usart2.h"
#include "AS608.h"
#include "timer.h"

#define usart2_baund  57600//串口2波特率，根据指纹模块波特率更改

SysPara AS608Para;//指纹模块AS608参数
u16 ValidN;//模块内有效模板个数
u8** kbd_tbl;
const  u8* kbd_menu[15]={"del_fp"," : ","add_fp","1","2","3","4","5","6","7","8","9","DEL","0","Enter",};//按键表
const  u8* kbd_delFR[15]={"BACK"," : ","del_all","1","2","3","4","5","6","7","8","9","DEL","0","Enter",};//按键表

void Add_FR(void);	//录指纹
void Del_FR(void);	//删除指纹
void press_FR(void);//刷指纹
void ShowErrMessage(u8 ensure);//显示确认码错误信息
void AS608_load_keyboard(u16 x,u16 y,u8 **kbtbl);//加载虚拟键盘
u8  AS608_get_keynum(u16 x,u16 y);//获取键盘数
u16 GET_NUM(void);//获取数值  

int main(void)
{		 
	u8 ensure;
	u8 key_num;
	char *str;	

  Stm32_Clock_Init(9);	//系统时钟设置
	delay_init(72);			  //延时初始化
	uart_init(72,115200); //串口1初始化，用于支持USMART  	  
	LCD_Init();						//初始化液晶 
	KEY_Init();						//按键初始化	  													    
	usmart_dev.init(72);	//usmart初始化	
 	usart2_init(36,usart2_baund);	//初始化串口2,用于与指纹模块通讯
	PS_StaGPIO_Init();	  //初始化FR读状态引脚	
	tp_dev.init();				//触摸屏初始化
 	mem_init();						//初始化内存池	    
 	exfuns_init();				//为fatfs相关变量申请内存  
 	f_mount(fs[1],"1:",1); //挂载FLASH.
	POINT_COLOR=RED;
	while(font_init()) 			//检查字库
	{	    
		LCD_ShowString(60,50,240,16,16,"Font Error!");
		delay_ms(200);				  
		LCD_Fill(60,50,240,66,WHITE);//清除显示
		delay_ms(200);		
	}
	if(!(tp_dev.touchtype&0x80))//如果是电阻屏
	{
		Show_Str_Mid(0,30,"Adjust the touch screen?",16,240);
		POINT_COLOR=BLUE;
		Show_Str_Mid(0,60,"YES: KEY1   NO: KEY0",16,240);	
		while(1)
		{
			key_num=KEY_Scan(0);
			if(key_num==KEY0_PRES)
				break;
			if(key_num==KEY1_PRES)
			{
				LCD_Clear(WHITE);
				TP_Adjust();  	 //屏幕校准 
				TP_Save_Adjdata();//保存校准参数
				break;				
			}
		}
	}
	/*加载指纹识别实验界面*/
	LCD_Clear(WHITE);
	POINT_COLOR=RED;
	Show_Str_Mid(0,0,"AS608 Fingerprint module test",16,240);	    			    	 
	Show_Str_Mid(0,20,"Author: @ALIENTEK",16,240);				    	 
 	POINT_COLOR=BLUE;
	Show_Str_Mid(0,40,"Connect with AS608....",16,240);	
	while(PS_HandShake(&AS608Addr))//与AS608模块握手
	{
		LCD_Fill(0,40,240,80,WHITE);
		Show_Str_Mid(0,40,"Cannot connect with AS608!",16,240);
		delay_ms(1000);
		LCD_Fill(0,40,240,80,WHITE);
		Show_Str_Mid(0,40,"Try to connect again....",16,240);	
		delay_ms(1000);	  
	}
	LCD_Fill(0,40,240,320,WHITE);
	Show_Str_Mid(0,40,"Connect success!",16,240);//通讯成功
	str=mymalloc(30);
	sprintf(str,"Baudrate:%d   Addr:%x",usart2_baund,AS608Addr);//显示波特率
	Show_Str(0,60,240,16,(u8*)str,16,0);
	delay_ms(100);
	ensure=PS_ValidTempleteNum(&ValidN);//读库指纹个数
	if(ensure!=0x00)
		ShowErrMessage(ensure);//显示确认码错误信息	
	ensure=PS_ReadSysPara(&AS608Para);  //读AS608模块参数 
	if(ensure==0x00)
	{
		mymemset(str,0,50);
		sprintf(str,"RemainNum:%d    Level:%d",AS608Para.PS_max-ValidN,AS608Para.PS_level);//显示剩余指纹数量和安全等级
		Show_Str(0,80,240,16,(u8*)str,16,0);
	}
	else
		ShowErrMessage(ensure);	
	myfree(str);
	AS608_load_keyboard(0,170,(u8**)kbd_menu);//加载虚拟键盘
	while(1)
	{
		key_num=AS608_get_keynum(0,170);	
		if(key_num)
		{
			if(key_num==1)Del_FR();		//删指纹
			if(key_num==3)Add_FR();		//录指纹									
		}
		if(PS_Sta)	 //检测PS_Sta状态，如果有手指按下
		{
			press_FR();//刷指纹			
		}				 
	} 	
}