Android U 匹配不到APN，无法发起数据建立的问题分析

问题

打开数据开关后，没有data PDN请求发起，因此无法上网。

根据日志确定是没有找到合适的data profile，原因一般有：

1、APN 没有配置

2、APN 类型/网络能力不满足——APN type或bearer

3、APN 配置了但被disable了——APN proofile的carrierEnable值

日志分析

fail log：

APN 被disable了，所以无法匹配。

//preferred=true说明当前选中的是此条APN

11-20 15:01:51.409140  2316  3480 D DPM-0   : getApnSettingForNetworkRequest: networkType=13 isMtkImsDataSupport=true hasEimsCapability=false mPreferredDataProfile=[DataProfile=[ApnSetting]....] dataProfilesCount=0 dataProfiles=[] mAllDataProfiles=[[DataProfile=[ApnSetting] INTERNET, 3080, xxxxxx, internet, , null, , null, null, 0, supl | hipri | default, IPV4V6, IP, false, 0, true, 0, 0, 0, 0, 0, gid, xxxxx000000000000, false, UNKNOWN, UNKNOWN, 0, -1, -1, false, 961, TrafficDescriptor={mDnn=internet, null}, preferred=true]...]
11-20 15:01:51.410224  2316  3480 D DPM-0   : Can't find any data profile that can satisfy [NetworkRequest [ NONE id=0, [ Capabilities: DUN&TRUSTED&NOT_VPN&NOT_VCN_MANAGED Uid: 1001 UnderlyingNetworks: Null] ], mPriority=30, state=UNSATISFIED, mAttachedDataNetwork=null, isMetered=true, created time=15:01:51.407, evaluation result=null]
11-20 15:01:51.411224  1366  1366 D ImsManager: [1] Registration callback removed.
11-20 15:01:51.413463  2316  3480 D DPM-0   : Unable to find a data profile for [NetworkRequest [ NONE id=0, [ Capabilities: DUN&TRUSTED&NOT_VPN&NOT_VCN_MANAGED Uid: 1001 UnderlyingNetworks: Null] ], mPriority=30, state=UNSATISFIED, mAttachedDataNetwork=null, isMetered=true, created time=15:01:51.408, evaluation result=null]

正常日志：

dataProfilesCount 指明网络能力匹配的APN数

11-20 15:19:20.723854  2316  2316 D DPM-0   : getApnSettingForNetworkRequest: networkType=13 isMtkImsDataSupport=true hasEimsCapability=false mPreferredDataProfile=[DataProfile=[ApnSetting] ....] dataProfilesCount=1 dataProfiles=[[DataProfile=[ApnSetting] 

11-20 15:19:20.725075  2316  2316 V DPM-0   : Satisfied profile: [DataProfile=[ApnSetting]

11-20 15:19:20.725871  2316  2316 D DPM-0   : The final available profile: [DataProfile=[ApnSetting] 

11-20 15:19:20.729504  2316  2316 D DNC-0   : Data evaluation: evaluation reason:NEW_REQUEST, Data allowed reason: NORMAL, candidate profile=[DataProfile=[ApnSetting] 

11-20 15:19:20.730116  2316  2316 D DNC-0   : onSetupDataNetwork: dataProfile=[DataProfile=[ApnSetting] 

11-20 15:19:20.731688  2316  2316 D DNC-0   : Creating data network on WWAN with [DataProfile=[ApnSetting] 

11-20 15:19:20.768286  2316  2316 D DSM-C-0 : setupDataCall

11-20 15:19:20.769505  2316  2316 D DN-114-C: ConnectingState: setupData: accessNetwork=EUTRAN, [DataProfile=[ApnSetting] ...], isModemRoaming=false, allowRoaming=true, PDU session id=0, matchAllRuleAllowed=true
11-20 15:19:20.776007  2316  2682 D RILJ    :

 [0868]> SETUP_DATA_CALL,reason=NORMAL,accessNetworkType=EUTRAN,dataProfile=[DataProfile=[ApnSetting] ..],isRoaming=false,allowRoaming=true,linkProperties=null,pduSessionId=0,sliceInfo=null,trafficDescriptor=TrafficDescriptor={mDnn=VZWADMIN, null},matchAllRuleAllowed=true [PHONE0]

11-20 15:19:21.063568  2316  2674 D RILJ    : [0868]< SETUP_DATA_CALL DataCallResponse: { cause=NONE(0x0) retry=-1 cid=1803 linkStatus=2 protocolType=2 ifname=ccmni3 addresses=[10.128.159.113/32, 2600:100f:f00c:330f:0:56:6fe2:e801/64] dnses=[/2001:4888:53:ff00:524:d::, /2001:4888:52:ff00:528:d::, /198.224.166.135, /198.224.167.135] gateways=[/10.128.159.113, /::] pcscf=[] mtu=1428 mtuV4=1428 mtuV6=1428 handoverFailureMode=unknown pduSessionId=0 defaultQos=EpsQos { qosClassId=8 downlink=Bandwidth { maxBitrateKbps=0 guaranteedBitrateKbps=0} uplink=Bandwidth { maxBitrateKbps=0 guaranteedBitrateKbps=0}} qosBearerSessions=[] sliceInfo=null trafficDescriptors=[]} [PHONE0]

 代码分析

DataProfileManager.java - 【frameworks/opt/telephony】

/**
 * Get the APN setting for the network request.
 *
 * @param networkRequest The network request.
 * @param networkType The current data network type.
 * @param ignorePermanentFailure {@code true} to ignore {@link ApnSetting#getPermanentFailed()}.
 * This should be set to true for condition-based retry/setup.
 * @return The APN setting. {@code null} if can't find any satisfiable data profile.
 */
private @Nullable ApnSetting getApnSettingForNetworkRequest(
        @NonNull TelephonyNetworkRequest networkRequest, @NetworkType int networkType,
        boolean ignorePermanentFailure) {
    if (!networkRequest.hasAttribute(
            TelephonyNetworkRequest.CAPABILITY_ATTRIBUTE_APN_SETTING)) {
        loge("Network request does not have APN setting attribute.");
        return null;
    }

    //1、优先选择preferred APN，如果满足并且不处于PermanentFailure状态则直接请求
    // If the preferred data profile can be used, always use it if it can satisfy the network
    // request with current network type (even though it's been marked as permanent failed.)
    if (mPreferredDataProfile != null
            && networkRequest.canBeSatisfiedBy(mPreferredDataProfile)
            && mPreferredDataProfile.getApnSetting() != null
            && mPreferredDataProfile.getApnSetting().canSupportNetworkType(networkType)) {
        if (ignorePermanentFailure || !mPreferredDataProfile.getApnSetting()
                .getPermanentFailed()) {
            return mPreferredDataProfile.getApnSetting();
        }
        log("The preferred data profile is permanently failed. Only condition based retry "
                + "can happen.");
        return null;
    }

    //2、如果没有首选数据配置文件，则过滤掉不能满足网络请求的数据配置文件
    //Note：找不到profile 一般就是这里匹配不到了
    // Filter out the data profile that can't satisfy the request.
    // Preferred data profile should be returned in the top of the list.
    List<DataProfile> dataProfiles = mAllDataProfiles.stream()
            .filter(networkRequest::canBeSatisfiedBy)
            // The longest time hasn't used data profile will be in the front so all the data
            // profiles can be tried.
            .sorted(Comparator.comparing(DataProfile::getLastSetupTimestamp))    //并按照它们的最后设置时间进行排序，将最长时间未使用的数据配置文件放在列表的前面
            .collect(Collectors.toList());
    for (DataProfile dataProfile : dataProfiles) {    //然后尝试筛选并使用它们来满足网络请求。
        logv("Satisfied profile: " + dataProfile + ", last setup="
                + DataUtils.elapsedTimeToString(dataProfile.getLastSetupTimestamp()));
    }
    if (dataProfiles.size() == 0) {
        log("Can't find any data profile that can satisfy " + networkRequest);
        return null;
    }

    // Check if the remaining data profiles can used in current data network type.
    dataProfiles = dataProfiles.stream()
            .filter(dp -> dp.getApnSetting() != null
                    && dp.getApnSetting().canSupportNetworkType(networkType))
            .collect(Collectors.toList());
    if (dataProfiles.size() == 0) {
        log("Can't find any data profile for network type "
                + TelephonyManager.getNetworkTypeName(networkType));
        return null;
    }

    // Check if preferred data profile set id matches.
    dataProfiles = dataProfiles.stream()
            .filter(dp -> dp.getApnSetting() != null
                    && (dp.getApnSetting().getApnSetId()
                    == Telephony.Carriers.MATCH_ALL_APN_SET_ID
                    || dp.getApnSetting().getApnSetId() == mPreferredDataProfileSetId))
            .collect(Collectors.toList());
    if (dataProfiles.size() == 0) {
        log("Can't find any data profile has APN set id matched. mPreferredDataProfileSetId="
                + mPreferredDataProfileSetId);
        return null;
    }

    // Check if data profiles are permanently failed.
    dataProfiles = dataProfiles.stream()
            .filter(dp -> ignorePermanentFailure || !dp.getApnSetting().getPermanentFailed())
            .collect(Collectors.toList());
    if (dataProfiles.size() == 0) {
        log("The suitable data profiles are all in permanent failed state.");
        return null;
    }

    return dataProfiles.get(0).getApnSetting();
}

排查接口

canBeSatisfiedBy in TelephonyNetworkRequest.java -【frameworks/opt/telephony】

canHandleType in ApnSetting.java【frameworks/base/telephony】

匹配不到关键就是在网络能力评估的过程，canBeSatisfiedBy会根据APN类型筛选能力匹配的项，在canHandleType检查完APN可用性之后，返回enable且符合网络的APN。

/**
* Check if this network request can be satisfied by a data profile.
*
* @param dataProfile The data profile to check.
* @return {@code true} if this network request can be satisfied by the data profile.
*/
public boolean canBeSatisfiedBy(@NonNull DataProfile dataProfile) {
    // If the network request can be translated to OS/App id, then check if the data profile's
    // OS/App id can satisfy it.
    if (hasAttribute(CAPABILITY_ATTRIBUTE_TRAFFIC_DESCRIPTOR_OS_APP_ID)
            && getOsAppId() != null) {
        // The network request has traffic descriptor type capabilities. Match the traffic
        // descriptor.
        if (dataProfile.getTrafficDescriptor() != null && Arrays.equals(getOsAppId().getBytes(),
                dataProfile.getTrafficDescriptor().getOsAppId())) {
            return true;
        }
    }

    // If the network request can be translated to APN setting or DNN in traffic descriptor,
    // then check if the data profile's APN setting can satisfy it.
    if ((hasAttribute(CAPABILITY_ATTRIBUTE_APN_SETTING)
            || hasAttribute(CAPABILITY_ATTRIBUTE_TRAFFIC_DESCRIPTOR_DNN))
            && dataProfile.getApnSetting() != null) {
        // Fallback to the legacy APN type matching.
        List<Integer> apnTypes = Arrays.stream(getCapabilities()).boxed()
                .map(DataUtils::networkCapabilityToApnType)
                .filter(apnType -> apnType != ApnSetting.TYPE_NONE)
                .collect(Collectors.toList());
        // In case of enterprise network request, the network request will have internet,
        // but APN type will not have default type as the enterprise apn should not be used
        // as default network. Ignore default type of the network request if it
        // has enterprise type as well. This will make sure the network request with
        // internet and enterprise will be satisfied with data profile with enterprise at the
        // same time default network request will not get satisfied with enterprise data
        // profile.
        // TODO b/232264746
        if (apnTypes.contains(ApnSetting.TYPE_ENTERPRISE)) {
            apnTypes.remove((Integer) ApnSetting.TYPE_DEFAULT);
        }

        return apnTypes.stream().allMatch(dataProfile.getApnSetting()::canHandleType);
    }
    return false;
}

/** @hide */
public boolean canHandleType(@ApnType int type) {
    if (!mCarrierEnabled) {
        return false;
    }
    // DEFAULT can handle HIPRI.
    return hasApnType(type);
}

定位原因的方法

查看APNSettings配置是否正确，以上问题就是APN配置了但被disable了。

[DataProfile=[ApnSetting] INTERNET, 3080, xxxxxx, internet, , null, , null, null, 0, supl | hipri | default, IPV4V6, IP, false, 0, true, 0, 0, 0, 0, 0, gid, xxxxx000000000000, false, UNKNOWN, UNKNOWN, 0, -1, -1, false, 961, TrafficDescriptor={mDnn=internet, null}, preferred=true]

根据ApnSettings实体节后打印信息，mCarrierEnabled就是上述日志false的位置。

/**
 * Returns the string representation of ApnSetting.
 *
 * This method prints null for unset elements. The output doesn't contain password or user.
 * @hide
 */
public String toString() {
    StringBuilder sb = new StringBuilder();
    sb.append("[ApnSetting] ")
            .append(mEntryName)
            .append(", ").append(mId)
            .append(", ").append(mOperatorNumeric)
            .append(", ").append(mApnName)
            .append(", ").append(mProxyAddress)
            .append(", ").append(UriToString(mMmsc))
            .append(", ").append(mMmsProxyAddress)
            .append(", ").append(portToString(mMmsProxyPort))
            .append(", ").append(portToString(mProxyPort))
            .append(", ").append(mAuthType).append(", ");
    final String[] types = getApnTypesStringFromBitmask(mApnTypeBitmask).split(",");
    sb.append(TextUtils.join(" | ", types));
    sb.append(", ").append(PROTOCOL_INT_MAP.get(mProtocol));
    sb.append(", ").append(PROTOCOL_INT_MAP.get(mRoamingProtocol));
    sb.append(", ").append(mCarrierEnabled);    //APN启用情况
    sb.append(", ").append(mProfileId);
    sb.append(", ").append(mPersistent);
    sb.append(", ").append(mMaxConns);
    sb.append(", ").append(mWaitTime);
    sb.append(", ").append(mMaxConnsTime);
    sb.append(", ").append(mMtuV4);
    sb.append(", ").append(mMtuV6);
    sb.append(", ").append(MVNO_TYPE_INT_MAP.get(mMvnoType));
    sb.append(", ").append(mMvnoMatchData);
    sb.append(", ").append(mPermanentFailed);
    sb.append(", ").append(TelephonyManager.convertNetworkTypeBitmaskToString(
            mNetworkTypeBitmask));
    sb.append(", ").append(TelephonyManager.convertNetworkTypeBitmaskToString(
            mLingeringNetworkTypeBitmask));
    sb.append(", ").append(mApnSetId);
    sb.append(", ").append(mCarrierId);
    sb.append(", ").append(mSkip464Xlat);
    sb.append(", ").append(mAlwaysOn);
    sb.append(", ").append(Objects.hash(mUser, mPassword));
    return sb.toString();
}

其他

代码网站阅读：AndroidXRef