Redis—B站学习—redis解析配置文件
一、Redis(分布式内存数据库)配置文件，其中:GENERAL通用，SECURITY安全，LIMITS限制是Redis的通用配置
1.Units单位
配置大小单位,开头定义了一些基本的度量单位，只支持bytes，不支持bit对大小写不敏感# Redis configuration file example. # # Note that in order to read the configuration file, Redis must be # started with the file path as first argument: # # ./redis-server /path/to/redis.conf # Note on units: when memory size is needed, it is possible to specify # it in the usual form of 1k 5GB 4M and so forth: # # 1k => 1000 bytes # 1kb => 1024 bytes # 1m => 1000000 bytes # 1mb => 1024*1024 bytes # 1g => 1000000000 bytes # 1gb => 1024*1024*1024 bytes # # units are case insensitive so 1GB 1Gb 1gB are all the same.
2.INCLUDES单位
和我们的Struts2配置文件类似，可以通过includes包含，redis.conf可以作为总闸，包含其他################################## INCLUDES ################################### # Include one or more other config files here. This is useful if you # have a standard template that goes to all Redis servers but also need # to customize a few per-server settings. Include files can include # other files, so use this wisely. # # Notice option "include" won't be rewritten by command "CONFIG REWRITE" # from admin or Redis Sentinel. Since Redis always uses the last processed # line as value of a configuration directive, you'd better put includes # at the beginning of this file to avoid overwriting config change at runtime. # # If instead you are interested in using includes to override configuration # options, it is better to use include as the last line. # # include /path/to/local.conf # include /path/to/other.conf
3.GENERAL单位
-
GENERAL单位的配置文件内容:通用的标准化配置################################# GENERAL ##################################### //配置文件中daemonize守护线程，默认是NO # By default Redis does not run as a daemon. Use 'yes' if you need it. # Note that Redis will write a pid file in /var/run/redis.pid when daemonized. daemonize yes # If you run Redis from upstart or systemd, Redis can interact with your # supervision tree. Options: # supervised no - no supervision interaction # supervised upstart - signal upstart by putting Redis into SIGSTOP mode # supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET # supervised auto - detect upstart or systemd method based on # UPSTART_JOB or NOTIFY_SOCKET environment variables # Note: these supervision methods only signal "process is ready." # They do not enable continuous liveness pings back to your supervisor. supervised no //进程管道id文件的路径 # If a pid file is specified, Redis writes it where specified at startup # and removes it at exit. # # When the server runs non daemonized, no pid file is created if none is # specified in the configuration. When the server is daemonized, the pid file # is used even if not specified, defaulting to "/var/run/redis.pid". # # Creating a pid file is best effort: if Redis is not able to create it # nothing bad happens, the server will start and run normally. pidfile /var/run/redis_6379.pid //说明服务器的日志级别，默认有四个日志级别 # Specify the server verbosity level. # This can be one of: # debug (a lot of information, useful for development/testing) # verbose (many rarely useful info, but not a mess like the debug level) # notice (moderately verbose, what you want in production probably) # warning (only very important / critical messages are logged) loglevel notice //日志的名字 # Specify the log file name. Also the empty string can be used to force # Redis to log on the standard output. Note that if you use standard # output for logging but daemonize, logs will be sent to /dev/null logfile "" //是否把日志输出到syslog中，默认是关闭 # To enable logging to the system logger, just set 'syslog-enabled' to yes, # and optionally update the other syslog parameters to suit your needs. # syslog-enabled no //指定syslog里的日志标志(这里时以redis作为系统日志的开头) # Specify the syslog identity. # syslog-ident redis //指定syslog设备，值可以是USER或LOCAL0-LOCAL7 # Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7. # syslog-facility local0 //默认redis有16个库，刚进客户端默认0库 # Set the number of databases. The default database is DB 0, you can select # a different one on a per-connection basis using SELECT <dbid> where # dbid is a number between 0 and 'databases'-1 databases 16 # By default Redis shows an ASCII art logo only when started to log to the # standard output and if the standard output is a TTY. Basically this means # that normally a logo is displayed only in interactive sessions. # # However it is possible to force the pre-4.0 behavior and always show a # ASCII art logo in startup logs by setting the following option to yes. always-show-logo yes
4.NETWORK配置部分
NETWORK配置部分:连接配置类似发送心跳################################## NETWORK ##################################### # By default, if no "bind" configuration directive is specified, Redis listens # for connections from all the network interfaces available on the server. # It is possible to listen to just one or multiple selected interfaces using # the "bind" configuration directive, followed by one or more IP addresses. # # Examples: # # bind 192.168.1.100 10.0.0.1 # bind 127.0.0.1 ::1 # # ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the # internet, binding to all the interfaces is dangerous and will expose the # instance to everybody on the internet. So by default we uncomment the # following bind directive, that will force Redis to listen only into # the IPv4 loopback interface address (this means Redis will be able to # accept connections only from clients running into the same computer it # is running). # # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES # JUST COMMENT THE FOLLOWING LINE. # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ bind 127.0.0.1 # Protected mode is a layer of security protection, in order to avoid that # Redis instances left open on the internet are accessed and exploited. # # When protected mode is on and if: # # 1) The server is not binding explicitly to a set of addresses using the # "bind" directive. # 2) No password is configured. # # The server only accepts connections from clients connecting from the # IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain # sockets. # # By default protected mode is enabled. You should disable it only if # you are sure you want clients from other hosts to connect to Redis # even if no authentication is configured, nor a specific set of interfaces # are explicitly listed using the "bind" directive. protected-mode yes //默认端口号 # Accept connections on the specified port, default is 6379 (IANA #815344). # If port 0 is specified Redis will not listen on a TCP socket. port 6379 //tcp-backlog设置tcp的backlog，backlog其实是一个连接队列， //backlog队列总和=未完成三次握手队列 + 已经完成三次握手队列。 //在高并发环境下你需要一个高backlog值来避免慢客户端连接问题。 //注意Linux内核会将这个值减小到/proc/sys/net/core/somaxconn的值， //所以需要确认增大somaxconn和tcp_max_syn_backlog两个值 //来达到想要的效果 # TCP listen() backlog. # # In high requests-per-second environments you need an high backlog in order # to avoid slow clients connections issues. Note that the Linux kernel # will silently truncate it to the value of /proc/sys/net/core/somaxconn so # make sure to raise both the value of somaxconn and tcp_max_syn_backlog # in order to get the desired effect. tcp-backlog 511 # Unix socket. # # Specify the path for the Unix socket that will be used to listen for # incoming connections. There is no default, so Redis will not listen # on a unix socket when not specified. # # unixsocket /tmp/redis.sock # unixsocketperm 700 //客户端和Redis服务端的连接超时时间，默认是0，表示永不超时,一直连接着。 # Close the connection after a client is idle for N seconds (0 to disable) timeout 0 //单位为秒，如果设置为0，则不会进行Keepalive检测，建议设置成60 # TCP keepalive. # # If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence # of communication. This is useful for two reasons: # # 1) Detect dead peers. # 2) Take the connection alive from the point of view of network # equipment in the middle. # # On Linux, the specified value (in seconds) is the period used to send ACKs. # Note that to close the connection the double of the time is needed. # On other kernels the period depends on the kernel configuration. # # A reasonable value for this option is 300 seconds, which is the new # Redis default starting with Redis 3.2.1. tcp-keepalive 300
5.SNAPSHOTTING部分
- SNAPSHOTTING配置文件详情
################################ SNAPSHOTTING ################################ # # Save the DB on disk: # # save <seconds> <changes> # # Will save the DB if both the given number of seconds and the given # number of write operations against the DB occurred. # # In the example below the behaviour will be to save: # after 900 sec (15 min) if at least 1 key changed # after 300 sec (5 min) if at least 10 keys changed # after 60 sec if at least 10000 keys changed # # Note: you can disable saving completely by commenting out all "save" lines. # # It is also possible to remove all the previously configured save # points by adding a save directive with a single empty string argument # like in the following example: # # save "" save 900 1 save 300 10 save 60 10000 # By default Redis will stop accepting writes if RDB snapshots are enabled # (at least one save point) and the latest background save failed. # This will make the user aware (in a hard way) that data is not persisting # on disk properly, otherwise chances are that no one will notice and some # disaster will happen. # # If the background saving process will start working again Redis will # automatically allow writes again. # # However if you have setup your proper monitoring of the Redis server # and persistence, you may want to disable this feature so that Redis will # continue to work as usual even if there are problems with disk, # permissions, and so forth. stop-writes-on-bgsave-error yes # Compress string objects using LZF when dump .rdb databases? # For default that's set to 'yes' as it's almost always a win. # If you want to save some CPU in the saving child set it to 'no' but # the dataset will likely be bigger if you have compressible values or keys. rdbcompression yes # Since version 5 of RDB a CRC64 checksum is placed at the end of the file. # This makes the format more resistant to corruption but there is a performance # hit to pay (around 10%) when saving and loading RDB files, so you can disable it # for maximum performances. # # RDB files created with checksum disabled have a checksum of zero that will # tell the loading code to skip the check. rdbchecksum yes # The filename where to dump the DB dbfilename dump.rdb # Remove RDB files used by replication in instances without persistence # enabled. By default this option is disabled, however there are environments # where for regulations or other security concerns, RDB files persisted on # disk by masters in order to feed replicas, or stored on disk by replicas # in order to load them for the initial synchronization, should be deleted # ASAP. Note that this option ONLY WORKS in instances that have both AOF # and RDB persistence disabled, otherwise is completely ignored. # # An alternative (and sometimes better) way to obtain the same effect is # to use diskless replication on both master and replicas instances. However # in the case of replicas, diskless is not always an option. rdb-del-sync-files no # The working directory. # # The DB will be written inside this directory, with the filename specified # above using the 'dbfilename' configuration directive. # # The Append Only File will also be created inside this directory. # # Note that you must specify a directory here, not a file name. dir ./
6.REPLICATION配置文件
- REPLICATION配置文件
################################# REPLICATION ################################# # Master-Replica replication. Use replicaof to make a Redis instance a copy of # another Redis server. A few things to understand ASAP about Redis replication. # # +------------------+ +---------------+ # | Master | ---> | Replica | # | (receive writes) | | (exact copy) | # +------------------+ +---------------+ # # 1) Redis replication is asynchronous, but you can configure a master to # stop accepting writes if it appears to be not connected with at least # a given number of replicas. # 2) Redis replicas are able to perform a partial resynchronization with the # master if the replication link is lost for a relatively small amount of # time. You may want to configure the replication backlog size (see the next # sections of this file) with a sensible value depending on your needs. # 3) Replication is automatic and does not need user intervention. After a # network partition replicas automatically try to reconnect to masters # and resynchronize with them. # # replicaof <masterip> <masterport> # If the master is password protected (using the "requirepass" configuration # directive below) it is possible to tell the replica to authenticate before # starting the replication synchronization process, otherwise the master will # refuse the replica request. # # masterauth <master-password> # # However this is not enough if you are using Redis ACLs (for Redis version # 6 or greater), and the default user is not capable of running the PSYNC # command and/or other commands needed for replication. In this case it's # better to configure a special user to use with replication, and specify the # masteruser configuration as such: # # masteruser <username> # # When masteruser is specified, the replica will authenticate against its # master using the new AUTH form: AUTH <username> <password>. # When a replica loses its connection with the master, or when the replication # is still in progress, the replica can act in two different ways: # # 1) if replica-serve-stale-data is set to 'yes' (the default) the replica will # still reply to client requests, possibly with out of date data, or the # data set may just be empty if this is the first synchronization. # # 2) if replica-serve-stale-data is set to 'no' the replica will reply with # an error "SYNC with master in progress" to all the kind of commands # but to INFO, replicaOF, AUTH, PING, SHUTDOWN, REPLCONF, ROLE, CONFIG, # SUBSCRIBE, UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, PUBSUB, # COMMAND, POST, HOST: and LATENCY. # replica-serve-stale-data yes # You can configure a replica instance to accept writes or not. Writing against # a replica instance may be useful to store some ephemeral data (because data # written on a replica will be easily deleted after resync with the master) but # may also cause problems if clients are writing to it because of a # misconfiguration. # # Since Redis 2.6 by default replicas are read-only. # # Note: read only replicas are not designed to be exposed to untrusted clients # on the internet. It's just a protection layer against misuse of the instance. # Still a read only replica exports by default all the administrative commands # such as CONFIG, DEBUG, and so forth. To a limited extent you can improve # security of read only replicas using 'rename-command' to shadow all the # administrative / dangerous commands. replica-read-only yes # Replication SYNC strategy: disk or socket. # # New replicas and reconnecting replicas that are not able to continue the # replication process just receiving differences, need to do what is called a # "full synchronization". An RDB file is transmitted from the master to the # replicas. # # The transmission can happen in two different ways: # # 1) Disk-backed: The Redis master creates a new process that writes the RDB # file on disk. Later the file is transferred by the parent # process to the replicas incrementally. # 2) Diskless: The Redis master creates a new process that directly writes the # RDB file to replica sockets, without touching the disk at all. # # With disk-backed replication, while the RDB file is generated, more replicas # can be queued and served with the RDB file as soon as the current child # producing the RDB file finishes its work. With diskless replication instead # once the transfer starts, new replicas arriving will be queued and a new # transfer will start when the current one terminates. # # When diskless replication is used, the master waits a configurable amount of # time (in seconds) before starting the transfer in the hope that multiple # replicas will arrive and the transfer can be parallelized. # # With slow disks and fast (large bandwidth) networks, diskless replication # works better. repl-diskless-sync no # When diskless replication is enabled, it is possible to configure the delay # the server waits in order to spawn the child that transfers the RDB via socket # to the replicas. # # This is important since once the transfer starts, it is not possible to serve # new replicas arriving, that will be queued for the next RDB transfer, so the # server waits a delay in order to let more replicas arrive. # # The delay is specified in seconds, and by default is 5 seconds. To disable # it entirely just set it to 0 seconds and the transfer will start ASAP. repl-diskless-sync-delay 5 # ----------------------------------------------------------------------------- # WARNING: RDB diskless load is experimental. Since in this setup the replica # does not immediately store an RDB on disk, it may cause data loss during # failovers. RDB diskless load + Redis modules not handling I/O reads may also # cause Redis to abort in case of I/O errors during the initial synchronization # stage with the master. Use only if your do what you are doing. # ----------------------------------------------------------------------------- # # Replica can load the RDB it reads from the replication link directly from the # socket, or store the RDB to a file and read that file after it was completely # recived from the master. # # In many cases the disk is slower than the network, and storing and loading # the RDB file may increase replication time (and even increase the master's # Copy on Write memory and salve buffers). # However, parsing the RDB file directly from the socket may mean that we have # to flush the contents of the current database before the full rdb was # received. For this reason we have the following options: # # "disabled" - Don't use diskless load (store the rdb file to the disk first) # "on-empty-db" - Use diskless load only when it is completely safe. # "swapdb" - Keep a copy of the current db contents in RAM while parsing # the data directly from the socket. note that this requires # sufficient memory, if you don't have it, you risk an OOM kill. repl-diskless-load disabled # Replicas send PINGs to server in a predefined interval. It's possible to # change this interval with the repl_ping_replica_period option. The default # value is 10 seconds. # # repl-ping-replica-period 10 # The following option sets the replication timeout for: # # 1) Bulk transfer I/O during SYNC, from the point of view of replica. # 2) Master timeout from the point of view of replicas (data, pings). # 3) Replica timeout from the point of view of masters (REPLCONF ACK pings). # # It is important to make sure that this value is greater than the value # specified for repl-ping-replica-period otherwise a timeout will be detected # every time there is low traffic between the master and the replica. # # repl-timeout 60 # Disable TCP_NODELAY on the replica socket after SYNC? # # If you select "yes" Redis will use a smaller number of TCP packets and # less bandwidth to send data to replicas. But this can add a delay for # the data to appear on the replica side, up to 40 milliseconds with # Linux kernels using a default configuration. # # If you select "no" the delay for data to appear on the replica side will # be reduced but more bandwidth will be used for replication. # # By default we optimize for low latency, but in very high traffic conditions # or when the master and replicas are many hops away, turning this to "yes" may # be a good idea. repl-disable-tcp-nodelay no # Set the replication backlog size. The backlog is a buffer that accumulates # replica data when replicas are disconnected for some time, so that when a # replica wants to reconnect again, often a full resync is not needed, but a # partial resync is enough, just passing the portion of data the replica # missed while disconnected. # # The bigger the replication backlog, the longer the time the replica can be # disconnected and later be able to perform a partial resynchronization. # # The backlog is only allocated once there is at least a replica connected. # # repl-backlog-size 1mb # After a master has no longer connected replicas for some time, the backlog # will be freed. The following option configures the amount of seconds that # need to elapse, starting from the time the last replica disconnected, for # the backlog buffer to be freed. # # Note that replicas never free the backlog for timeout, since they may be # promoted to masters later, and should be able to correctly "partially # resynchronize" with the replicas: hence they should always accumulate backlog. # # A value of 0 means to never release the backlog. # # repl-backlog-ttl 3600 # The replica priority is an integer number published by Redis in the INFO # output. It is used by Redis Sentinel in order to select a replica to promote # into a master if the master is no longer working correctly. # # A replica with a low priority number is considered better for promotion, so # for instance if there are three replicas with priority 10, 100, 25 Sentinel # will pick the one with priority 10, that is the lowest. # # However a special priority of 0 marks the replica as not able to perform the # role of master, so a replica with priority of 0 will never be selected by # Redis Sentinel for promotion. # # By default the priority is 100. replica-priority 100 # It is possible for a master to stop accepting writes if there are less than # N replicas connected, having a lag less or equal than M seconds. # # The N replicas need to be in "online" state. # # The lag in seconds, that must be <= the specified value, is calculated from # the last ping received from the replica, that is usually sent every second. # # This option does not GUARANTEE that N replicas will accept the write, but # will limit the window of exposure for lost writes in case not enough replicas # are available, to the specified number of seconds. # # For example to require at least 3 replicas with a lag <= 10 seconds use: # # min-replicas-to-write 3 # min-replicas-max-lag 10 # # Setting one or the other to 0 disables the feature. # # By default min-replicas-to-write is set to 0 (feature disabled) and # min-replicas-max-lag is set to 10. # A Redis master is able to list the address and port of the attached # replicas in different ways. For example the "INFO replication" section # offers this information, which is used, among other tools, by # Redis Sentinel in order to discover replica instances. # Another place where this info is available is in the output of the # "ROLE" command of a master. # # The listed IP and address normally reported by a replica is obtained # in the following way: # # IP: The address is auto detected by checking the peer address # of the socket used by the replica to connect with the master. # # Port: The port is communicated by the replica during the replication # handshake, and is normally the port that the replica is using to # listen for connections. # # However when port forwarding or Network Address Translation (NAT) is # used, the replica may be actually reachable via different IP and port # pairs. The following two options can be used by a replica in order to # report to its master a specific set of IP and port, so that both INFO # and ROLE will report those values. # # There is no need to use both the options if you need to override just # the port or the IP address. # # replica-announce-ip 5.5.5.5 # replica-announce-port 1234
7.SECURITY配置部分
SECURITY配置部分:访问密码的查看、设置和取消- 通过
config get requirepass获取登录redis需要的密码 - 通过
config set requirepass "123456"设置登录redis的密码为123456 - 如果设置完密码，那么需要在操作任何命令之前打出
auth+设置的密码################################## SECURITY ################################### # Warning: since Redis is pretty fast an outside user can try up to # 1 million passwords per second against a modern box. This means that you # should use very strong passwords, otherwise they will be very easy to break. # Note that because the password is really a shared secret between the client # and the server, and should not be memorized by any human, the password # can be easily a long string from /dev/urandom or whatever, so by using a # long and unguessable password no brute force attack will be possible. # Redis ACL users are defined in the following format: # # user <username> ... acl rules ... # # For example: # # user worker +@list +@connection ~jobs:* on >ffa9203c493aa99 # # The special username "default" is used for new connections. If this user # has the "nopass" rule, then new connections will be immediately authenticated # as the "default" user without the need of any password provided via the # AUTH command. Otherwise if the "default" user is not flagged with "nopass" # the connections will start in not authenticated state, and will require # AUTH (or the HELLO command AUTH option) in order to be authenticated and # start to work. # # The ACL rules that describe what an user can do are the following: # # on Enable the user: it is possible to authenticate as this user. # off Disable the user: it's no longer possible to authenticate # with this user, however the already authenticated connections # will still work. # +<command> Allow the execution of that command # -<command> Disallow the execution of that command # +@<category> Allow the execution of all the commands in such category # with valid categories are like @admin, @set, @sortedset, ... # and so forth, see the full list in the server.c file where # the Redis command table is described and defined. # The special category @all means all the commands, but currently # present in the server, and that will be loaded in the future # via modules. # +<command>|subcommand Allow a specific subcommand of an otherwise # disabled command. Note that this form is not # allowed as negative like -DEBUG|SEGFAULT, but # only additive starting with "+". # allcommands Alias for +@all. Note that it implies the ability to execute # all the future commands loaded via the modules system. # nocommands Alias for -@all. # ~<pattern> Add a pattern of keys that can be mentioned as part of # commands. For instance ~* allows all the keys. The pattern # is a glob-style pattern like the one of KEYS. # It is possible to specify multiple patterns. # allkeys Alias for ~* # resetkeys Flush the list of allowed keys patterns. # ><password> Add this passowrd to the list of valid password for the user. # For example >mypass will add "mypass" to the list. # This directive clears the "nopass" flag (see later). # <<password> Remove this password from the list of valid passwords. # nopass All the set passwords of the user are removed, and the user # is flagged as requiring no password: it means that every # password will work against this user. If this directive is # used for the default user, every new connection will be # immediately authenticated with the default user without # any explicit AUTH command required. Note that the "resetpass" # directive will clear this condition. # resetpass Flush the list of allowed passwords. Moreover removes the # "nopass" status. After "resetpass" the user has no associated # passwords and there is no way to authenticate without adding # some password (or setting it as "nopass" later). # reset Performs the following actions: resetpass, resetkeys, off, # -@all. The user returns to the same state it has immediately # after its creation. # # ACL rules can be specified in any order: for instance you can start with # passwords, then flags, or key patterns. However note that the additive # and subtractive rules will CHANGE MEANING depending on the ordering. # For instance see the following example: # # user alice on +@all -DEBUG ~* >somepassword # # This will allow "alice" to use all the commands with the exception of the # DEBUG command, since +@all added all the commands to the set of the commands # alice can use, and later DEBUG was removed. However if we invert the order # of two ACL rules the result will be different: # # user alice on -DEBUG +@all ~* >somepassword # # Now DEBUG was removed when alice had yet no commands in the set of allowed # commands, later all the commands are added, so the user will be able to # execute everything. # # Basically ACL rules are processed left-to-right. # # For more information about ACL configuration please refer to # the Redis web site at https://redis.io/topics/acl # ACL LOG # # The ACL Log tracks failed commands and authentication events associated # with ACLs. The ACL Log is useful to troubleshoot failed commands blocked # by ACLs. The ACL Log is stored in and consumes memory. There is no limit # to its length.You can reclaim memory with ACL LOG RESET or set a maximum # length below. acllog-max-len 128 # Using an external ACL file # # Instead of configuring users here in this file, it is possible to use # a stand-alone file just listing users. The two methods cannot be mixed: # if you configure users here and at the same time you activate the exteranl # ACL file, the server will refuse to start. # # The format of the external ACL user file is exactly the same as the # format that is used inside redis.conf to describe users. # # aclfile /etc/redis/users.acl # IMPORTANT NOTE: starting with Redis 6 "requirepass" is just a compatiblity # layer on top of the new ACL system. The option effect will be just setting # the password for the default user. Clients will still authenticate using # AUTH <password> as usually, or more explicitly with AUTH default <password> # if they follow the new protocol: both will work. # # requirepass foobared # Command renaming (DEPRECATED). # # ------------------------------------------------------------------------ # WARNING: avoid using this option if possible. Instead use ACLs to remove # commands from the default user, and put them only in some admin user you # create for administrative purposes. # ------------------------------------------------------------------------ # # It is possible to change the name of dangerous commands in a shared # environment. For instance the CONFIG command may be renamed into something # hard to guess so that it will still be available for internal-use tools # but not available for general clients. # # Example: # # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 # # It is also possible to completely kill a command by renaming it into # an empty string: # # rename-command CONFIG "" # # Please note that changing the name of commands that are logged into the # AOF file or transmitted to replicas may cause problems.
8.LIMITS配置部分
- 查看6.0.5中，LIMITS里面的配置在CLIENTS和MEMORY MANAGEMENT中存在
- maxmemory-policy：出现最大内存的处理政策，以下几种也可以说是缓存过期清洁系列
1.volatile-lru-> remove the key with an expire set using an LRU algorithm(先进先出),使用LRU算法移除key，只对设置了过期时间的键
2.allkeys-lru-> remove any key according to the LRU algorithm(),使用LRU算法移除key，频率使用得少移除
3.volatile-random-> remove a random key with an expire set,在过期集合中移除随机的key，只对设置了过期时间的键
4.allkeys-random-> remove a random key, any key,移除随机的key
5.volatile-ttl -> remove the key with the nearest expire time (minor TTL),移除那些TTL值最小的key，即那些最近要过期的key
6.noeviction-> don’t expire at all, just return an error on write operations,不进行移除。针对写操作，只是返回错误信息################################### CLIENTS #################################### //默认最大多少人可以连接 //设置redis同时可以与多少个客户端进行连接。默认情况下为10000个客户端。 //当你无法设置进程文件句柄限制时，redis会设置为当前的文件句柄限制值减去32，因为redis会为自身内部处理逻辑留一些句柄出来。 //如果达到了此限制，redis则会拒绝新的连接请求，并且向这些连接请求方发出“max number of clients reached”以作回应。 # Set the max number of connected clients at the same time. By default # this limit is set to 10000 clients, however if the Redis server is not # able to configure the process file limit to allow for the specified limit # the max number of allowed clients is set to the current file limit # minus 32 (as Redis reserves a few file descriptors for internal uses). # # Once the limit is reached Redis will close all the new connections sending # an error 'max number of clients reached'. # # maxclients 10000 ############################## MEMORY MANAGEMENT ################################ //maxmemory:最大内存 //设置redis可以使用的内存量。一旦到达内存使用上限， //redis将会试图移除内部数据，移除规则可以通过maxmemory-policy来指定。 //如果redis无法根据移除规则来移除内存中的数据，或者设置了“不允许移除”， //那么redis则会针对那些需要申请内存的指令返回错误信息，比如SET、LPUSH等。 //但是对于无内存申请的指令，仍然会正常响应，比如GET等。 //如果你的redis是主redis（说明你的redis有从redis），那么在设置内存使用上限时， //需要在系统中留出一些内存空间给同步队列缓存，只有在你设置的是“不移除”的情况下，才不用考虑这个因素 # Set a memory usage limit to the specified amount of bytes. # When the memory limit is reached Redis will try to remove keys # according to the eviction policy selected (see maxmemory-policy). # # If Redis can not remove keys according to the policy, or if the policy is # set to 'noeviction', Redis will start to reply with errors to commands # that would use more memory, like SET, LPUSH, and so on, and will continue # to reply to read-only commands like GET. # # This option is usually useful when using Redis as an LRU or LFU cache, or to # set a hard memory limit for an instance (using the 'noeviction' policy). # # WARNING: If you have replicas attached to an instance with maxmemory on, # the size of the output buffers needed to feed the replicas are subtracted # from the used memory count, so that network problems / resyncs will # not trigger a loop where keys are evicted, and in turn the output # buffer of replicas is full with DELs of keys evicted triggering the deletion # of more keys, and so forth until the database is completely emptied. # # In short... if you have replicas attached it is suggested that you set a lower # limit for maxmemory so that there is some free RAM on the system for replica # output buffers (but this is not needed if the policy is 'noeviction'). # # maxmemory <bytes> //maxmemory-policy：出现最大内存的处理政策，以下几种也可以说是缓存过期清洁系列 // 1.volatile-lru -> remove the key with an expire set using an LRU algorithm`(先进先出)`, // 使用LRU算法移除key，只对设置了过期时间的键 // 2.allkeys-lru -> remove any key according to the LRU algorithm`()`, // 使用LRU算法移除key，频率使用得少移除 // 3.volatile-random -> remove a random key with an expire set, // 在过期集合中移除随机的key，只对设置了过期时间的键 // 4.allkeys-random -> remove a random key, any key,移除随机的key // 5.volatile-ttl -> remove the key with the nearest expire time (minor TTL), // 移除那些TTL值最小的key，即那些最近要过期的key // 6.noeviction -> don't expire at all, just return an error on write operations,不进行移除。针对写操作，只是返回错误信息 # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory # is reached. You can select one from the following behaviors: # # volatile-lru -> Evict using approximated LRU, only keys with an expire set. # allkeys-lru -> Evict any key using approximated LRU. # volatile-lfu -> Evict using approximated LFU, only keys with an expire set. # allkeys-lfu -> Evict any key using approximated LFU. # volatile-random -> Remove a random key having an expire set. # allkeys-random -> Remove a random key, any key. # volatile-ttl -> Remove the key with the nearest expire time (minor TTL) # noeviction -> Don not evict anything, just return an error on write operations. # # LRU means Least Recently Used # LFU means Least Frequently Used # # Both LRU, LFU and volatile-ttl are implemented using approximated # randomized algorithms. # # Note: with any of the above policies, Redis will return an error on write # operations, when there are no suitable keys for eviction. # # At the date of writing these commands are: set setnx setex append # incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd # sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby # zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby # getset mset msetnx exec sort # # The default is: # //默认maxmemory-policy永不过期 # maxmemory-policy noeviction //设置样本数量，LRU算法和最小TTL算法都并非是精确的算法，而是估算值，所以你可以设置样本的大小， //redis默认会检查这么多个key并选择其中LRU的那个 # LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated # algorithms (in order to save memory), so you can tune it for speed or # accuracy. For default Redis will check five keys and pick the one that was # used less recently, you can change the sample size using the following # configuration directive. # //默认选取5个 # The default of 5 produces good enough results. 10 Approximates very closely # true LRU but costs more CPU. 3 is faster but not very accurate. # # maxmemory-samples 5 # Starting from Redis 5, by default a replica will ignore its maxmemory setting # (unless it is promoted to master after a failover or manually). It means # that the eviction of keys will be just handled by the master, sending the # DEL commands to the replica as keys evict in the master side. # # This behavior ensures that masters and replicas stay consistent, and is usually # what you want, however if your replica is writable, or you want the replica # to have a different memory setting, and you are sure all the writes performed # to the replica are idempotent, then you may change this default (but be sure # to understand what you are doing). # # Note that since the replica by default does not evict, it may end using more # memory than the one set via maxmemory (there are certain buffers that may # be larger on the replica, or data structures may sometimes take more memory # and so forth). So make sure you monitor your replicas and make sure they # have enough memory to never hit a real out-of-memory condition before the # master hits the configured maxmemory setting. # # replica-ignore-maxmemory yes # Redis reclaims expired keys in two ways: upon access when those keys are # found to be expired, and also in background, in what is called the # "active expire key". The key space is slowly and interactively scanned # looking for expired keys to reclaim, so that it is possible to free memory # of keys that are expired and will never be accessed again in a short time. # # The default effort of the expire cycle will try to avoid having more than # ten percent of expired keys still in memory, and will try to avoid consuming # more than 25% of total memory and to add latency to the system. However # it is possible to increase the expire "effort" that is normally set to # "1", to a greater value, up to the value "10". At its maximum value the # system will use more CPU, longer cycles (and technically may introduce # more latency), and will tollerate less already expired keys still present # in the system. It's a tradeoff betweeen memory, CPU and latecy. # # active-expire-effort 1
9.SNAPSHOTTING配置部分
- 详见RDB持久化部分
10.==APPEND ONLY MODE追加
- 详见AOF持久化部分
常见配置redis.conf介绍
参数说明
参数说明redis.conf 配置项说明如下：
- Redis默认不是以守护进程的方式运行，可以通过该配置项修改，使用yes启用守护进程 daemonize no
- 当Redis以守护进程方式运行时，Redis默认会把pid写入/var/run/redis.pid文件，可以通过pidfile指定 pidfile /var/run/redis.pid
- 指定Redis监听端口，默认端口为6379，作者在自己的一篇博文中解释了为什么选用6379作为默认端口，因为6379在手机按键上MERZ对应的号码，而MERZ取自意大利歌女Alessia Merz的名字 port 6379
- 绑定的主机地址 bind 127.0.0.1
- 当 客户端闲置多长时间后关闭连接，如果指定为0，表示关闭该功能 timeout 300
- 指定日志记录级别，Redis总共支持四个级别：debug、verbose、notice、warning，默认为verbose loglevel verbose
- 日志记录方式，默认为标准输出，如果配置Redis为守护进程方式运行，而这里又配置为日志记录方式为标准输出，则日志将会发送给/dev/null logfile stdout
- 设置数据库的数量，默认数据库为0，可以使用SELECT 命令在连接上指定数据库id databases 16
- 指定在多长时间内，有多少次更新操作，就将数据同步到数据文件，可以多个条件配合 save Redis默认配置文件中提供了三个条件： save 900 1 save 300 10 save 60 10000 分别表示900秒（15分钟）内有1个更改，300秒（5分钟）内有10个更改以及60秒内有10000个更改。
- 指定存储至本地数据库时是否压缩数据，默认为yes，Redis采用LZF压缩，如果为了节省CPU时间，可以关闭该选项，但会导致数据库文件变的巨大 rdbcompression yes
- 指定本地数据库文件名，默认值为dump.rdb dbfilename dump.rdb
- 指定本地数据库存放目录 dir ./
- 设置当本机为slav服务时，设置master服务的IP地址及端口，在Redis启动时，它会自动从master进行数据同步 slaveof
- 当master服务设置了密码保护时，slav服务连接master的密码 masterauth
- 设置Redis连接密码，如果配置了连接密码，客户端在连接Redis时需要通过AUTH 命令提供密码，默认关闭 requirepass foobared
- 设置同一时间最大客户端连接数，默认无限制，Redis可以同时打开的客户端连接数为Redis进程可以打开的最大文件描述符数，如果设置 maxclients 0，表示不作限制。当客户端连接数到达限制时，Redis会关闭新的连接并向客户端返回max number of clients reached错误信息 maxclients 128
- 指定Redis最大内存限制，Redis在启动时会把数据加载到内存中，达到最大内存后，Redis会先尝试清除已到期或即将到期的Key，当此方法处理 后，仍然到达最大内存设置，将无法再进行写入操作，但仍然可以进行读取操作。Redis新的vm机制，会把Key存放内存，Value会存放在swap区 maxmemory
- 指定是否在每次更新操作后进行日志记录，Redis在默认情况下是异步的把数据写入磁盘，如果不开启，可能会在断电时导致一段时间内的数据丢失。因为 redis本身同步数据文件是按上面save条件来同步的，所以有的数据会在一段时间内只存在于内存中。默认为no appendonly no
- 指定更新日志文件名，默认为appendonly.aof appendfilename appendonly.aof
- 指定更新日志条件，共有3个可选值： no：表示等操作系统进行数据缓存同步到磁盘（快） always：表示每次更新操作后手动调用fsync()将数据写到磁盘（慢，安全） everysec：表示每秒同步一次（折衷，默认值） appendfsync everysec
- 指定是否启用虚拟内存机制，默认值为no，简单的介绍一下，VM机制将数据分页存放，由Redis将访问量较少的页即冷数据swap到磁盘上，访问多的页面由磁盘自动换出到内存中（在后面的文章我会仔细分析Redis的VM机制） vm-enabled no
- 虚拟内存文件路径，默认值为/tmp/redis.swap，不可多个Redis实例共享 vm-swap-file /tmp/redis.swap
- 将所有大于vm-max-memory的数据存入虚拟内存,无论vm-max-memory设置多小,所有索引数据都是内存存储的(Redis的索引数据 就是keys),也就是说,当vm-max-memory设置为0的时候,其实是所有value都存在于磁盘。默认值为0 vm-max-memory 0
- Redis swap文件分成了很多的page，一个对象可以保存在多个page上面，但一个page上不能被多个对象共享，vm-page-size是要根据存储的 数据大小来设定的，作者建议如果存储很多小对象，page大小最好设置为32或者64bytes；如果存储很大大对象，则可以使用更大的page，如果不 确定，就使用默认值 vm-page-size 32
- 设置swap文件中的page数量，由于页表（一种表示页面空闲或使用的bitmap）是在放在内存中的，，在磁盘上每8个pages将消耗1byte的内存。 vm-pages 134217728
- 设置访问swap文件的线程数,最好不要超过机器的核数,如果设置为0,那么所有对swap文件的操作都是串行的，可能会造成比较长时间的延迟。默认值为4 vm-max-threads 4
- 设置在向客户端应答时，是否把较小的包合并为一个包发送，默认为开启 glueoutputbuf yes
- 指定在超过一定的数量或者最大的元素超过某一临界值时，采用一种特殊的哈希算法 hash-max-zipmap-entries 64 hash-max-zipmap-value 512
- 定是否激活重置哈希，默认为开启（后面在介绍Redis的哈希算法时具体介绍） activerehashing yes
- 指定包含其它的配置文件，可以在同一主机上多个Redis实例之间使用同一份配置文件，而同时各个实例又拥有自己的特定配置文件 include /path/to/local.conf
扫一扫
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
