live555 rtsp服务器实战之createNewStreamSource
live555 rtsp服务器实战之doGetNextFrame
注意：该篇文章可能有些绕，最好跟着文章追踪下源码，不了解源码可能就是天书；
概要
live555用于实际项目开发时，createNewStreamSource和doGetNextFrame是必须要实现的两个虚函数，一般会创建两个类来实现这两个函数：假如这两个类为H264LiveVideoServerMediaSubssion和H264FramedLiveSource；H264LiveVideoServerMediaSubssion为实时视频会话类，用于实现createNewStreamSource虚函数；
H264FramedLiveSource为实时视频帧资源类，用户实现doGetNextFrame函数；
那么这两个函数是什么时候被调用以及他们的作用是什么呢？本节将详细介绍；
声明：该文章基于H264视频源为基础分析，其他源类似；
由于这两个类主要是自定义虚函数，所以存在一定的继承关系，首先需要明确这两个类的继承关系(本章只介绍H264FramedLiveSource)：
H264FramedLiveSource:FramedSource:MediaSource:Medium
doGetNextFrame调用流程
doGetNextFrame函数声明于FrameSource类：
virtual void doGetNextFrame() = 0;该声明为纯虚函数，所以必须有子类对该函数进行实现，H264FramedLiveSource类就是用于实现该函数；doGetNextFrame函数只有一个功能：获取视频帧；
void H264FramedLiveSource::doGetNextFrame()
{
uint8_t *frame = new uint8_t[1024*1024];
int len = 0;
//获取一帧视频帧
get_frame(&frame, len);
//将帧长度赋值给父类的成员变量fFrameSize
fFrameSize = len;
//将帧数据赋值给父类的成员变量fTo
memcpy(fTo, frame, len);
delete [] frame;
// nextTask() = envir().taskScheduler().scheduleDelayedTask(0,(TaskFunc*)FramedSource::afterGetting, this);//表示延迟0秒后再执行 afterGetting 函数
afterGetting(this);
return;
}fFrameSize和fTo的两个父类变量在流传输时会用到；那么问题来了：doGetNextFrame函数在整个流程中在哪里被调用？什么时候调用？
首先doGetNextFrame函数是在PLAY信令交互的时候被调用；调用流程为：
handleCmd_PLAY->startStream->startPlaying(OnDemandServerMediaSubsession)->startPlaying(MediaSink)->continuePlaying(虚函数，子类H264or5VideoRTPSink实现)->continuePlaying(虚函数，子类MultiFramedRTPSink实现)->buildAndSendPacket->packFrame(MultiFramedRTPSink)->getNextFrame->doGetNextFrame下面详解介绍下这个流程，看过我的另一篇文章："live555 rtsp服务器实战之createNewStreamSource" 的都知道handleRequestBytes函数调用了handleCmd_SETUP；同样handleCmd_PLAY函数也是在这里被调用的；handleRequestBytes函数就是用来处理各种客户端信令交互信息的；handleRequestBytes函数如下：
void RTSPServer::RTSPClientConnection::handleRequestBytes(int newBytesRead)
{
.
.
.
if (urlIsRTSPS != fOurRTSPServer.fOurConnectionsUseTLS)
{
#ifdef DEBUG
fprintf(stderr, "Calling handleCmd_redirect()\n");
#endif
handleCmd_redirect(urlSuffix);
}
else if (strcmp(cmdName, "OPTIONS") == 0)
{
// If the "OPTIONS" command included a "Session:" id for a session that doesn't exist,
// then treat this as an error:
if (requestIncludedSessionId && clientSession == NULL)
{
#ifdef DEBUG
fprintf(stderr, "Calling handleCmd_sessionNotFound() (case 1)\n");
#endif
handleCmd_sessionNotFound();
}
else
{
// Normal case:
handleCmd_OPTIONS();
}
}
else if (urlPreSuffix[0] == '\0' && urlSuffix[0] == '*' && urlSuffix[1] == '\0')
{
// The special "*" URL means: an operation on the entire server. This works only for GET_PARAMETER and SET_PARAMETER:
if (strcmp(cmdName, "GET_PARAMETER") == 0)
{
handleCmd_GET_PARAMETER((char const *)fRequestBuffer);
}
else if (strcmp(cmdName, "SET_PARAMETER") == 0)
{
handleCmd_SET_PARAMETER((char const *)fRequestBuffer);
}
else
{
handleCmd_notSupported();
}
}
else if (strcmp(cmdName, "DESCRIBE") == 0)
{
handleCmd_DESCRIBE(urlPreSuffix, urlSuffix, (char const *)fRequestBuffer);
}
else if (strcmp(cmdName, "SETUP") == 0)
{
Boolean areAuthenticated = True;
if (!requestIncludedSessionId)
{
// No session id was present in the request.
// So create a new "RTSPClientSession" object for this request.
// But first, make sure that we're authenticated to perform this command:
char urlTotalSuffix[2 * RTSP_PARAM_STRING_MAX];
// enough space for urlPreSuffix/urlSuffix'\0'
urlTotalSuffix[0] = '\0';
if (urlPreSuffix[0] != '\0')
{
strcat(urlTotalSuffix, urlPreSuffix);
strcat(urlTotalSuffix, "/");
}
strcat(urlTotalSuffix, urlSuffix);
if (authenticationOK("SETUP", urlTotalSuffix, (char const *)fRequestBuffer))
{
clientSession = (RTSPServer::RTSPClientSession *)fOurRTSPServer.createNewClientSessionWithId();
}
else
{
areAuthenticated = False;
}
}
if (clientSession != NULL)
{
clientSession->handleCmd_SETUP(this, urlPreSuffix, urlSuffix, (char const *)fRequestBuffer);
playAfterSetup = clientSession->fStreamAfterSETUP;
}
else if (areAuthenticated)
{
#ifdef DEBUG
fprintf(stderr, "Calling handleCmd_sessionNotFound() (case 2)\n");
#endif
handleCmd_sessionNotFound();
}
}
else if (strcmp(cmdName, "TEARDOWN") == 0 || strcmp(cmdName, "PLAY") == 0 || strcmp(cmdName, "PAUSE") == 0 || strcmp(cmdName, "GET_PARAMETER") == 0 || strcmp(cmdName, "SET_PARAMETER") == 0)
{
if (clientSession != NULL)
{
clientSession->handleCmd_withinSession(this, cmdName, urlPreSuffix, urlSuffix, (char const *)fRequestBuffer);
}
else
{
#ifdef DEBUG
fprintf(stderr, "Calling handleCmd_sessionNotFound() (case 3)\n");
#endif
handleCmd_sessionNotFound();
}
}
else if (strcmp(cmdName, "REGISTER") == 0 || strcmp(cmdName, "DEREGISTER") == 0)
{
// Because - unlike other commands - an implementation of this command needs
// the entire URL, we re-parse the command to get it:
char *url = strDupSize((char *)fRequestBuffer);
if (sscanf((char *)fRequestBuffer, "%*s %s", url) == 1)
{
// Check for special command-specific parameters in a "Transport:" header:
Boolean reuseConnection, deliverViaTCP;
char *proxyURLSuffix;
parseTransportHeaderForREGISTER((const char *)fRequestBuffer, reuseConnection, deliverViaTCP, proxyURLSuffix);
handleCmd_REGISTER(cmdName, url, urlSuffix, (char const *)fRequestBuffer, reuseConnection, deliverViaTCP, proxyURLSuffix);
delete[] proxyURLSuffix;
}
else
{
handleCmd_bad();
}
delete[] url;
}
else
{
// The command is one that we don't handle:
handleCmd_notSupported();
}
.
.
.
}handleCmd_withinSession函数内部就调用了handleCmd_PLAY函数；仅整理流程，调用途中的函数这里不做解释；直接跳到packFrame(MultiFramedRTPSink)函数：
void MultiFramedRTPSink::packFrame()
{
// Get the next frame.
// First, skip over the space we'll use for any frame-specific header:
fCurFrameSpecificHeaderPosition = fOutBuf->curPacketSize();
fCurFrameSpecificHeaderSize = frameSpecificHeaderSize();
fOutBuf->skipBytes(fCurFrameSpecificHeaderSize);
fTotalFrameSpecificHeaderSizes += fCurFrameSpecificHeaderSize;
// See if we have an overflow frame that was too big for the last pkt
if (fOutBuf->haveOverflowData())
{
// Use this frame before reading a new one from the source
unsigned frameSize = fOutBuf->overflowDataSize();
struct timeval presentationTime = fOutBuf->overflowPresentationTime();
unsigned durationInMicroseconds = fOutBuf->overflowDurationInMicroseconds();
fOutBuf->useOverflowData();
afterGettingFrame1(frameSize, 0, presentationTime, durationInMicroseconds);
}
else
{
// Normal case: we need to read a new frame from the source
if (fSource == NULL)
return;
fSource->getNextFrame(fOutBuf->curPtr(), fOutBuf->totalBytesAvailable(),
afterGettingFrame, this, ourHandleClosure, this);
}
}这里调用了getNextFrame函数，来看下getNextFrame函数的实现：
void FramedSource::getNextFrame(unsigned char* to, unsigned maxSize,
afterGettingFunc* afterGettingFunc,
void* afterGettingClientData,
onCloseFunc* onCloseFunc,
void* onCloseClientData) {
// Make sure we're not already being read:
if (fIsCurrentlyAwaitingData) {
envir() << "FramedSource[" << this << "]::getNextFrame(): attempting to read more than once at the same time!\n";
envir().internalError();
}
fTo = to;
fMaxSize = maxSize;
fNumTruncatedBytes = 0; // by default; could be changed by doGetNextFrame()
fDurationInMicroseconds = 0; // by default; could be changed by doGetNextFrame()
fAfterGettingFunc = afterGettingFunc;
fAfterGettingClientData = afterGettingClientData;
fOnCloseFunc = onCloseFunc;
fOnCloseClientData = onCloseClientData;
fIsCurrentlyAwaitingData = True;
doGetNextFrame();
}发现啦！发现doGetNextFrame函数啦！所以doGetNextFrame函数就是在getNextFrame内被调用的；但是问题来了：搜索可以发现在live555中doGetNextFrame函数很多；怎么就确定这里的doGetNextFrame和我们自定义的doGetNextFrame有关呢？
问的好！那这的关键点就在于fSource->getNextFrame的fSource变量到底是什么类的对象；才能确定doGetNextFrame到底调用的是哪个类的函数；fSource属于MediaSink类的成员变量:
FramedSource* fSource;但是FrameSource子类很多；所以需要确定fSource到底指向的是哪个子类；
既然fSource是MediaSink类的成员，那么fSource肯定是在MediaSink或其子类中被赋值；因此查找下这些类；首先明确下MediaSink的继承关系,从fSource调用的类开始查找：
//父类
MultiFramedRTPSink:RTPSink:MediaSink:Medium
//子类
H264VideoRTPSink:H264or5VideoRTPSink:VideoRTPSink:MultiFramedRTPSink因此在这些类中查找即可；根据调用流程可知startPlaying最先赋值，值是startPlaying的第一个参数；
Boolean MediaSink::startPlaying(MediaSource& source,
afterPlayingFunc* afterFunc,
void* afterClientData) {
// Make sure we're not already being played:
if (fSource != NULL) {
envir().setResultMsg("This sink is already being played");
return False;
}
// Make sure our source is compatible:
if (!sourceIsCompatibleWithUs(source)) {
envir().setResultMsg("MediaSink::startPlaying(): source is not compatible!");
return False;
}
fSource = (FramedSource*)&source;
fAfterFunc = afterFunc;
fAfterClientData = afterClientData;
return continuePlaying();
}而该函数是在StreamState类中的startPlaying函数中调用；
void StreamState ::startPlaying(Destinations *dests, unsigned clientSessionId,
TaskFunc *rtcpRRHandler, void *rtcpRRHandlerClientData,
ServerRequestAlternativeByteHandler *serverRequestAlternativeByteHandler,
void *serverRequestAlternativeByteHandlerClientData)
{
.
.
.
if (!fAreCurrentlyPlaying && fMediaSource != NULL)
{
if (fRTPSink != NULL)
{
fRTPSink->startPlaying(*fMediaSource, afterPlayingStreamState, this);
fAreCurrentlyPlaying = True;
}
else if (fUDPSink != NULL)
{
fUDPSink->startPlaying(*fMediaSource, afterPlayingStreamState, this);
fAreCurrentlyPlaying = True;
}
}
}startPlaying的第一个参数是fMediaSource；而fMediaSource是在StreamState类的构造函数中被赋值的：
StreamState::StreamState(OnDemandServerMediaSubsession &master,
Port const &serverRTPPort, Port const &serverRTCPPort,
RTPSink *rtpSink, BasicUDPSink *udpSink,
unsigned totalBW, FramedSource *mediaSource,
Groupsock *rtpGS, Groupsock *rtcpGS)
: fMaster(master), fAreCurrentlyPlaying(False), fReferenceCount(1),
fServerRTPPort(serverRTPPort), fServerRTCPPort(serverRTCPPort),
fRTPSink(rtpSink), fUDPSink(udpSink), fStreamDuration(master.duration()),
fTotalBW(totalBW), fRTCPInstance(NULL) /* created later */,
fMediaSource(mediaSource), fStartNPT(0.0), fRTPgs(rtpGS), fRTCPgs(rtcpGS)
{
}StreamState是在OnDemandServerMediaSubsession类的getStreamParameters函数中被调用：
void OnDemandServerMediaSubsession ::getStreamParameters(unsigned clientSessionId,
struct sockaddr_storage const &clientAddress,
Port const &clientRTPPort,
Port const &clientRTCPPort,
int tcpSocketNum,
unsigned char rtpChannelId,
unsigned char rtcpChannelId,
TLSState *tlsState,
struct sockaddr_storage &destinationAddress,
u_int8_t & /*destinationTTL*/,
Boolean &isMulticast,
Port &serverRTPPort,
Port &serverRTCPPort,
void *&streamToken)
{
if (addressIsNull(destinationAddress))
{
// normal case - use the client address as the destination address:
destinationAddress = clientAddress;
}
isMulticast = False;
if (fLastStreamToken != NULL && fReuseFirstSource)
{
// Special case: Rather than creating a new 'StreamState',
// we reuse the one that we've already created:
serverRTPPort = ((StreamState *)fLastStreamToken)->serverRTPPort();
serverRTCPPort = ((StreamState *)fLastStreamToken)->serverRTCPPort();
++((StreamState *)fLastStreamToken)->referenceCount();
streamToken = fLastStreamToken;
}
else
{
// Normal case: Create a new media source:
unsigned streamBitrate;
FramedSource *mediaSource = createNewStreamSource(clientSessionId, streamBitrate);
.
.
.
streamToken = fLastStreamToken = new StreamState(*this, serverRTPPort, serverRTCPPort, rtpSink, udpSink,
streamBitrate, mediaSource,
rtpGroupsock, rtcpGroupsock);
}
}createNewStreamSource函数加上OnDemandServerMediaSubsession类是不是很熟悉？对的OnDemandServerMediaSubsession就是我们自定义的用于实现createNewStreamSource函数的类H264LiveVideoServerMediaSubssion的父类；因为createNewStreamSource在OnDemandServerMediaSubsession中是纯虚函数，因此该处调用的就是我们自定义的createNewStreamSource函数；
因此在startPlaying函数中将fSource赋值为createNewStreamSource的返回值；我们再看一下createNewStreamSource函数吧：
FramedSource* H264LiveVideoServerMediaSubssion::createNewStreamSource(unsigned clientSessionId, unsigned& estBitrate)
{
/* Remain to do : assign estBitrate */
estBitrate = 1000; // kbps, estimate
//创建视频源
H264FramedLiveSource* liveSource = H264FramedLiveSource::createNew(envir(), Server_datasize, Server_databuf, Server_dosent);
if (liveSource == NULL)
{
return NULL;
}
// Create a framer for the Video Elementary Stream:
return H264VideoStreamFramer::createNew(envir(), liveSource);
}则fSource就是H264VideoStreamFramer::createNew(envir(), liveSource); 因此getNextFrame函数中运行的doGetNextFrame就是H264VideoStreamFramer中的doGetNextFrame函数；
等等！发现问题没有：这个并不是我们自定义的H264FramedLiveSource类中获取视频帧的函数doGetNextFrame；这是为什么呢？
别急！返回值中H264VideoStreamFramer::createNew(envir(), liveSource); 将doGetNextFrame的类对象liveSource传递进了H264VideoStreamFramer类中；而liveSource最终赋值给了StreamParser类中成员变量fInputSource和FramedFilter类的成员变量fInputSource；更多细节参考我的另一篇文章；
接着往下说：H264VideoStreamFramer中的doGetNextFrame函数会调用MPEGVideoStreamFramer中的doGetNextFrame函数；在这个函数中有一个ensureValidBytes1第一次调用了自定义的函数doGetNextFrame
void StreamParser::ensureValidBytes1(unsigned numBytesNeeded) {
.
.
.
fInputSource->getNextFrame(&curBank()[fTotNumValidBytes],
maxNumBytesToRead,
afterGettingBytes, this,
onInputClosure, this);
throw NO_MORE_BUFFERED_INPUT;
}这里仅仅是对流的解析；下面才是真正获取视频流：
void H264or5Fragmenter::afterGettingFrame(void* clientData, unsigned frameSize,
unsigned numTruncatedBytes,
struct timeval presentationTime,
unsigned durationInMicroseconds) {
H264or5Fragmenter* fragmenter = (H264or5Fragmenter*)clientData;
fragmenter->afterGettingFrame1(frameSize, numTruncatedBytes, presentationTime,
durationInMicroseconds);
}
void H264or5Fragmenter::afterGettingFrame1(unsigned frameSize,
unsigned numTruncatedBytes,
struct timeval presentationTime,
unsigned durationInMicroseconds) {
fNumValidDataBytes += frameSize;
fSaveNumTruncatedBytes = numTruncatedBytes;
fPresentationTime = presentationTime;
fDurationInMicroseconds = durationInMicroseconds;
// Deliver data to the client:
doGetNextFrame();
}
void H264or5Fragmenter::doGetNextFrame() {
if (fNumValidDataBytes == 1) {
// We have no NAL unit data currently in the buffer. Read a new one:
fInputSource->getNextFrame(&fInputBuffer[1], fInputBufferSize - 1,
afterGettingFrame, this,
FramedSource::handleClosure, this);
} else {
...
}
}afterGettingFrame函数才是真正调用doGetNextFrame的函数？那么afterGettingFrame是在哪里被调用的呢？
看一下fSource->getNextFrame函数：
fInputSource->getNextFrame(fOutBuf->curPtr(), fOutBuf->totalBytesAvailable(),
afterGettingFrame, this, ourHandleClosure, this);这里第三个参数就调用了afterGettingFrame函数，再看看getNextFrame函数实现；上面已经写过了 为了方便理解这里再写下：
void FramedSource::getNextFrame(unsigned char* to, unsigned maxSize,
afterGettingFunc* afterGettingFunc,
void* afterGettingClientData,
onCloseFunc* onCloseFunc,
void* onCloseClientData) {
// Make sure we're not already being read:
if (fIsCurrentlyAwaitingData) {
envir() << "FramedSource[" << this << "]::getNextFrame(): attempting to read more than once at the same time!\n";
envir().internalError();
}
fTo = to;
fMaxSize = maxSize;
fNumTruncatedBytes = 0; // by default; could be changed by doGetNextFrame()
fDurationInMicroseconds = 0; // by default; could be changed by doGetNextFrame()
fAfterGettingFunc = afterGettingFunc;
fAfterGettingClientData = afterGettingClientData;
fOnCloseFunc = onCloseFunc;
fOnCloseClientData = onCloseClientData;
fIsCurrentlyAwaitingData = True;
doGetNextFrame();
}afterGettingFrame被赋值给了fAfterGettingClientData指针；那么fAfterGettingClientData指针什么时候被调用的？
回望doGetNextFrame的实现，每次读完流都会调用:
afterGetting(this);
//函数实现
void FramedSource::afterGetting(FramedSource* source) {
source->nextTask() = NULL;
source->fIsCurrentlyAwaitingData = False;
// indicates that we can be read again
// Note that this needs to be done here, in case the "fAfterFunc"
// called below tries to read another frame (which it usually will)
if (source->fAfterGettingFunc != NULL) {
(*(source->fAfterGettingFunc))(source->fAfterGettingClientData,
source->fFrameSize, source->fNumTruncatedBytes,
source->fPresentationTime,
source->fDurationInMicroseconds);
}
}afterGetting的函数实现中就调用了fAfterGettingFunc指针；这就使doGetNextFrame形成了闭环：
至此函数doGetNextFrame的执行流程已经全部解析完毕，后续还会继续更新关于doGetNextFrame函数获取的帧数据是怎么处理和发送的，H264VideoStreamFramer中的doGetNextFrame函数和MPEGVideoStreamFramer中的doGetNextFrame函数都是什么作用！期待的话关注我，了解最新动态！
该文章持续更新！如果有错误或者模糊的地方欢迎留言探讨！
995
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
