配置
主机名 | ip | 功能 |
---|---|---|
bd223 | 10.1.24.223 | org2的peer0和peer1节点,orderer1节点 |
bd225 | 10.1.24.225 | org1的peer0和peer1节点,orderer节点,三个kafka和三个zookeeper节点 |
前言
其实搭建的过程很简单,主要的时间都是耗费在了kafka的搭建上。因为机器资源不够,所以kafka都是搭建在同一台机器上的。这就导致了一个问题,和kafka集群
搭建在同一台主机上的orderer节点
可以正常操作没有问题,但是搭建在另一台主机上的orderer1节点
就出现了kafka服务
没有准备就绪的错误,初步推断是kafka集群
的监听问题,最后果然也就是这个问题。
configtx.yaml
在first-network
中,configtx.yaml
默认是生成了五个orderer(orderer.example.com,orderer2.example.com,orderer3.example.com,orderer4.example.com,orderer5.example.com)
的证书等文件。可以看到是没有orderer1的,所以修改configtx.yaml
增加orderer1.example.com
。当然也可以直接使用orderer2.example.com
。修改后的文件如下:
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
---
################################################################################
#
# Section: Organizations
#
# - This section defines the different organizational identities which will
# be referenced later in the configuration.
#
################################################################################
Organizations:
# SampleOrg defines an MSP using the sampleconfig. It should never be used
# in production but may be used as a template for other definitions
- &OrdererOrg
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: OrdererOrg
# ID to load the MSP definition as
ID: OrdererMSP
# MSPDir is the filesystem path which contains the MSP configuration
MSPDir: crypto-config/ordererOrganizations/example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
Policies:
Readers:
Type: Signature
Rule: "OR('OrdererMSP.member')"
Writers:
Type: Signature
Rule: "OR('OrdererMSP.member')"
Admins:
Type: Signature
Rule: "OR('OrdererMSP.admin')"
- &Org1
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: Org1MSP
# ID to load the MSP definition as
ID: Org1MSP
MSPDir: crypto-config/peerOrganizations/org1.example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
Policies:
Readers:
Type: Signature
Rule: "OR('Org1MSP.admin', 'Org1MSP.peer', 'Org1MSP.client')"
Writers:
Type: Signature
Rule: "OR('Org1MSP.admin', 'Org1MSP.client')"
Admins:
Type: Signature
Rule: "OR('Org1MSP.admin')"
# leave this flag set to true.
AnchorPeers:
# AnchorPeers defines the location of peers which can be used
# for cross org gossip communication. Note, this value is only
# encoded in the genesis block in the Application section context
- Host: peer0.org1.example.com
Port: 7051
- &Org2
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: Org2MSP
# ID to load the MSP definition as
ID: Org2MSP
MSPDir: crypto-config/peerOrganizations/org2.example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
Policies:
Readers:
Type: Signature
Rule: "OR('Org2MSP.admin', 'Org2MSP.peer', 'Org2MSP.client')"
Writers:
Type: Signature
Rule: "OR('Org2MSP.admin', 'Org2MSP.client')"
Admins:
Type: Signature
Rule: "OR('Org2MSP.admin')"
AnchorPeers:
# AnchorPeers defines the location of peers which can be used
# for cross org gossip communication. Note, this value is only
# encoded in the genesis block in the Application section context
- Host: peer0.org2.example.com
Port: 9051
################################################################################
#
# SECTION: Capabilities
#
# - This section defines the capabilities of fabric network. This is a new
# concept as of v1.1.0 and should not be utilized in mixed networks with
# v1.0.x peers and orderers. Capabilities define features which must be
# present in a fabric binary for that binary to safely participate in the
# fabric network. For instance, if a new MSP type is added, newer binaries
# might recognize and validate the signatures from this type, while older
# binaries without this support would be unable to validate those
# transactions. This could lead to different versions of the fabric binaries
# having different world states. Instead, defining a capability for a channel
# informs those binaries without this capability that they must cease
# processing transactions until they have been upgraded. For v1.0.x if any
# capabilities are defined (including a map with all capabilities turned off)
# then the v1.0.x peer will deliberately crash.
#
################################################################################
Capabilities:
# Channel capabilities apply to both the orderers and the peers and must be
# supported by both.
# Set the value of the capability to true to require it.
Channel: &ChannelCapabilities
# V1.4.3 for Channel is a catchall flag for behavior which has been
# determined to be desired for all orderers and peers running at the v1.4.3
# level, but which would be incompatible with orderers and peers from
# prior releases.
# Prior to enabling V1.4.3 channel capabilities, ensure that all
# orderers and peers on a channel are at v1.4.3 or later.
V1_4_3: true
# V1.3 for Channel enables the new non-backwards compatible
# features and fixes of fabric v1.3
V1_3: false
# V1.1 for Channel enables the new non-backwards compatible
# features and fixes of fabric v1.1
V1_1: false
# Orderer capabilities apply only to the orderers, and may be safely
# used with prior release peers.
# Set the value of the capability to true to require it.
Orderer: &OrdererCapabilities
# V1.4.2 for Orderer is a catchall flag for behavior which has been
# determined to be desired for all orderers running at the v1.4.2
# level, but which would be incompatible with orderers from prior releases.
# Prior to enabling V1.4.2 orderer capabilities, ensure that all
# orderers on a channel are at v1.4.2 or later.
V1_4_2: true
# V1.1 for Orderer enables the new non-backwards compatible
# features and fixes of fabric v1.1
V1_1: false
# Application capabilities apply only to the peer network, and may be safely
# used with prior release orderers.
# Set the value of the capability to true to require it.
Application: &ApplicationCapabilities
# V1.4.2 for Application enables the new non-backwards compatible
# features and fixes of fabric v1.4.2.
V1_4_2: true
# V1.3 for Application enables the new non-backwards compatible
# features and fixes of fabric v1.3.
V1_3: false
# V1.2 for Application enables the new non-backwards compatible
# features and fixes of fabric v1.2 (note, this need not be set if
# later version capabilities are set)
V1_2: false
# V1.1 for Application enables the new non-backwards compatible
# features and fixes of fabric v1.1 (note, this need not be set if
# later version capabilities are set).
V1_1: false
################################################################################
#
# SECTION: Application
#
# - This section defines the values to encode into a config transaction or
# genesis block for application related parameters
#
################################################################################
Application: &ApplicationDefaults
# Organizations is the list of orgs which are defined as participants on
# the application side of the network
Organizations:
# Policies defines the set of policies at this level of the config tree
# For Application policies, their canonical path is
# /Channel/Application/<PolicyName>
Policies:
Readers:
Type: ImplicitMeta
Rule: "ANY Readers"