Brocade 6510 交换机清空配置，重新initiator交换机

关闭当前激活的Zone配置	:FID128:admin>  cfgdisable You are about to disable zoning configuration. This action will disable any previous zoning configuration enabled. Do you want to disable zoning configuration? (yes, y, no, n): [no] yes Updating flash ...
删除所有 zone 信息	FID128:admin> cfgclear The Clear All action will clear all Aliases, Zones, FA Zones and configurations in the Defined configuration. Run cfgSave to commit the transaction or cfgTransAbort to cancel the transaction. Do you really want to clear all configurations?  (yes, y, no, n): [no] yes
查看zone配置信息 显示为空	FID128:admin> cfgshow Defined configuration:  no configuration defined   Effective configuration:  no configuration in effect
保存当前的配置	FID128:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on Defined configuration. Do you want to save the Defined zoning configuration only?  (yes, y, no, n): [no] yes Updating flash ...
根据需求，修改交换机名称	:FID128:admin> switchname B06_6510_04 Committing configuration... Done. Switch name has been changed.Please re-login into the switch for the change to be applied.
恢复为默认的设置	:FID128:admin > configdefault
重新设置IP地址	:FID128:admin> ipaddrset Ethernet IP Address [100.100.1.42]:100.100.8.70 Ethernet Subnetmask [255.255.255.0]:255.255.254.0 Gateway IP Address [10.100.1.1]:100.100.8.1 DHCP [Off]:
修改密码	:FID128:admin> B06_6510_04:FID128:admin> passwd Changing password for admin Enter old password: Enter new password: Re-type new password: passwd: all authentication tokens updated successfully Saving password to stable storage. Password saved to stable storage successfully.
修改domainID	B06_6510_04:FID128:admin> switchdisable B06_6510_04:FID128:admin> configure   Configure...     Fabric parameters (yes, y, no, n): [no] yes       Domain: (1..239) [1] 20     WWN Based persistent PID (yes, y, no, n): [no]     F-Port Device Update Mode: (on, off): [off]     Allow XISL Use (yes, y, no, n): [no]     Location ID: (0..4) [0]     R_A_TOV: (4000..120000) [10000]     E_D_TOV: (1000..5000) [2000]     WAN_TOV: (0..30000) [0]     MAX_HOPS: (7..19) [7]     Data field size: (256..2112) [2112]     Sequence Level Switching: (0..1) [0]     Disable Device Probing: (0..1) [0]     Suppress Class F Traffic: (0..1) [0]     Per-frame Route Priority: (0..1) [0]     Long Distance Fabric: (0..1) [0]     BB credit: (1..27) [16]     Disable FID Check (yes, y, no, n): [no]   Insistent Domain ID Mode (yes, y, no, n): [no]   Disable Default PortName (yes, y, no, n): [no]     Display FDMI Host Name (yes, y, no, n): [no]     Edge Hold Time(Low(80ms), Medium(220ms), High(500ms), UserDefined(80-500ms): (80..500) [220]     Remote Fosexec feature: (on, off): [off]     High Integrity Fabric Mode (yes, y, no, n): [no]   Virtual Channel parameters (yes, y, no, n): [no]   F-Port login parameters (yes, y, no, n): [no]   D-Port Parameters (yes, y, no, n): [no]   RDP Polling Cycle(hours)[0 = Disable Polling]: (0..24) [0]   Zoning Operation parameters (yes, y, no, n): [no]   RSCN Transmission Mode (yes, y, no, n): [no]   Arbitrated Loop parameters (yes, y, no, n): [no]   System services (yes, y, no, n): [no]   Portlog events enable (yes, y, no, n): [no]   ssl attributes (yes, y, no, n): [no]   rpcd attributes (yes, y, no, n): [no]   webtools attributes (yes, y, no, n): [no]       WARNING: The domain ID will be changed. The port level zoning may be affected     B06_6510_04:FID128:admin> B06_6510_04:FID128:admin> B06_6510_04:FID128:admin> switchenable B06_6510_04:FID128:admin>