Ubuntu一站式搭建Kubernetes与Kubeflow

最新推荐文章于 2024-05-15 16:32:39 发布

哎哟喂〤

最新推荐文章于 2024-05-15 16:32:39 发布

阅读量1.6k

点赞数 1

分类专栏：环境部署文章标签： kubernetes ubuntu

本文链接：https://blog.csdn.net/qq_40379491/article/details/115287420

版权

环境部署专栏收录该内容

1 篇文章 0 订阅

订阅专栏

Ubuntu环境下Kubernetes与Kubeflow一站式搭建

前言

服务器系统：ubuntu16.04
服务器网络：192.168.51.6
Kubernetes版本：1.16.3
Docker版本：18.09.8
Kubeflow版本：1.0.2

提示：Kubernetes可以是单节点集群或是多节点集群，master节点的部署方式与node节点的部署方式略有不同，稍后会有详细说明，旨在帮助大家快速部署，减少踩坑，点赞收藏哦

一、配置要求

服务器硬件配置需求此处不做赘述，当然大家的机器配置越高越好。
Kubernetes的旧版本可能与最新的Kubeflow版本不兼容，以下表格提供了关于kubeflow和Kubernetes版本之间兼容性的信息，也可前往链接自行查看：https://www.kubeflow.org/docs/started/k8s/overview/#minimum-system-requirements
在这里插入图片描述

二、安装kubernetes

1.关闭防火墙、selinux以及swap（master节点和node节点均执行）

a、关闭防火墙

代码如下（示例）：

sudo ufw disable

b、关闭selinux(自行选择)

临时关闭：

setenforce 0 # 临时

永久关闭：

sed -i 's/enforcing/disabled' /etc/selinux/config # 永久

c、关闭swap

sudo sed -i 's/^.*swap/#&/g' /etc/fstab
sudo swapoff -a # 临时

2.将桥接的IPV4流量传递到iptables（master节点和node节点均执行）

指令如下：

sudo tee /etc/sysctl.d/k8s.conf <<-'EOF'
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

使其生效：

sudo sysctl --system

3.时间同步（master节点和node节点均执行）

sudo apt install ntpdate -y
sudo ntpdate time.windows.com

4.安装Docker（master节点和node节点均执行）

卸载旧版本：

sudo apt-get remove docker docker-engine docker-ce docker.io # 卸载旧版本

更新 sources.list（提示：更新前请自行备份sources.list）：

sudo tee /etc/apt/sources.list <<-'EOF'
deb http://mirrors.aliyun.com/ubuntu/ xenial main
deb-src http://mirrors.aliyun.com/ubuntu/ xenial main

deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main
deb-src http://mirrors.aliyun.com/ubuntu/ xenial-updates main

deb http://mirrors.aliyun.com/ubuntu/ xenial universe
deb-src http://mirrors.aliyun.com/ubuntu/ xenial universe
deb http://mirrors.aliyun.com/ubuntu/ xenial-updates universe
deb-src http://mirrors.aliyun.com/ubuntu/ xenial-updates universe

deb http://mirrors.aliyun.com/ubuntu/ xenial-security main
deb-src http://mirrors.aliyun.com/ubuntu/ xenial-security main
deb http://mirrors.aliyun.com/ubuntu/ xenial-security universe
deb-src http://mirrors.aliyun.com/ubuntu/ xenial-security universe
EOF

安装docker（依次执行）：

sudo apt-get update
sudo apt-get install -y apt-transport-https ca-certificates curl software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
sudo apt-get update
apt-cache madison docker-ce # 查看docker版本列表，选择安装自己需要的版本（此处选择安装18.09.8）
sudo apt install docker-ce=5:18.09.8~3-0~ubuntu-xenial

更新用户组

sudo groupadd docker
sudo gpasswd -a $USER docker
newgrp docker

创建文件 /etc/docker/daemon.json ，添加内容，命令如下：

sudo mkdir -p /etc/docker

sudo tee /etc/docker/daemon.json <<-'EOF'
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "registry-mirrors": ["https://docker.mirrors.ustc.edu.cn/"]
}
EOF

重启docker并设置开机自启动：

sudo systemctl daemon-reload
sudo systemctl restart docker
systemctl enable docker

关闭dns服务，注释dns，内容如下：

sudo gedit /etc/NetworkManager/NetworkManager.conf # 打开配置文件

[main]
plugins=ifupdown,keyfile,ofono
#dns=dnsmasq  # 这行注释

保存并关闭，重启服务：

sudo systemctl restart network-manager

5.安装kubeadm,kubelet,kubectl（master节点和node节点均执行）

sudo apt-get update && sudo apt-get install -y apt-transport-https

curl https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg | sudo apt-key add -

创建文件 /etc/apt/sources.list.d/kubernetes.list并添加内容，指令如下：

sudo tee /etc/apt/sources.list.d/kubernetes.list <<-'EOF'
deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main
EOF

sudo apt-get update
sudo apt-get install -y kubelet=1.16.3-00 kubeadm=1.16.3-00 kubectl=1.16.3-00

提示：以上步骤，master节点和node节点均需执行，后面的步骤master节点和node节点执行略有不同

创建集群并初始化(仅master节点执行)：

sudo kubeadm init --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.16.3 --apiserver-advertise-address=192.168.51.6 --pod-network-cidr=10.244.0.0/16

等待安装完成后，根据提示初始化 kubectl，例：

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

以下内容用于添加node节点，是由主节点初始化后生成的，注意保存对应的自己机器生成的信息，例：

kubeadm join 192.168.8.42:6443 --token ppch60.xst0udineu69v0ht \
    --discovery-token-ca-cert-hash sha256:aa956312810107c67a72d350961f200a41f08ff3aeda4f1e41daaddbccd1ed62

如果出错，重置并重新初始化，直至成功：

sudo kubeadm reset

sudo kubeadm init --image-repository registry.aliyuncs.com/google_containers --kubernetes-version v1.16.3 --apiserver-advertise-address=192.168.51.6 --pod-network-cidr=10.244.0.0/16

设置开机启动:

sudo systemctl enable kubelet

启动k8s服务程序

sudo systemctl start kubelet

安装flannel网络插件：

kubectl apply -f kube-flannel.yml
kube-flannel.yml下载网址如下：
链接：https://pan.baidu.com/s/1WOaNkB-FG08LYvbuoTWRmA 
提取码：jbe4

如不能下载，附kube-flannel.yml内容如下：

---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
    - configMap
    - secret
    - emptyDir
    - hostPath
  allowedHostPaths:
    - pathPrefix: "/etc/cni/net.d"
    - pathPrefix: "/etc/kube-flannel"
    - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: ['NET_ADMIN']
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unused in CaaSP
    rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
rules:
  - apiGroups: ['extensions']
    resources: ['podsecuritypolicies']
    verbs: ['use']
    resourceNames: ['psp.flannel.unprivileged']
  - apiGroups:
      - ""
    resources:
      - pods
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes/status
    verbs:
      - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-amd64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - amd64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-amd64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-amd64
        command: [ "/opt/bin/flanneld","/bin/bash", "-ce", "tail -f /dev/null" ]
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - arm64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-arm64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-arm64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - arm
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-arm
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-arm
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-ppc64le
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - ppc64le
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-ppc64le
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-ppc64le
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-s390x
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: kubernetes.io/arch
                    operator: In
                    values:
                      - s390x
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.12.0-s390x
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.12.0-s390x
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg

查看状态

kubectl get pod -n kube-system

有时会有coreDNS两个容器起不来，执行命令$ sudo gedit /run/flannel/subnet.env，添加以下内容：

FLANNEL_NETWORK=10.244.0.0/16
FLANNEL_SUBNET=10.244.0.1/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=true

让 master 也可以接受调度：

kubectl taint nodes --all node-role.kubernetes.io/master-

此处选用flannel网络插件原因如下：之前环境测试过程中选择了calico网络插件，导致安装kubeflow后有几个pod一直起不来，猜测可能由网络问题导致，如有需要，calico网络插件安装方式如下
安装calico网络插件：

kubectl apply -f https://docs.projectcalico.org/manifests/calico.yaml

查看状态：

kubectl get pod -n kube-system

如果插件pod起不来，重启机器，然后依次执行以下命令：

sudo ufw disable
setenforce 0
sudo swapoff -a
sudo systemctl restart docker
sudo systemctl restart kubelet.service

添加Node节点

Node节点环境配置方式如下
将主节点中的/etc/kubernetes/admin.conf文件拷贝到node节点相同的目录下，执行远程拷贝指令：

sudo scp /etc/kubernetes/admin.conf wk@192.168.51.7:/etc/kubernetes

注意：该指令在主节点下执行，wk@192.168.51.7为node节点IP，需换成你自己的IP

然后依次执行：

mkdir -p $HOME/.kube
cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
chown $(id -u):$(id -g) $HOME/.kube/config

kubeadm join 192.168.8.42:6443 --token ppch60.xst0udineu69v0ht \
    --discovery-token-ca-cert-hash sha256:aa956312810107c67a72d350961f200a41f08ff3aeda4f1e41daaddbccd1ed62

注意：记得关闭swap

安装网络插件，Node节点安装网络插件方式与主节点方式一致

至此kubernetes集群部署完毕

安装kubeflow

该教程旨在帮助小伙伴们快速完成环境部署，防止踩坑

安装步骤

从https://github.com/kubeflow/kfctl/releases/下载v1.0.2版本对应的kfctl二进制文件，解压安装包并添加到执行路径：

tar -xvf kfctl_v1.0.2-0-ga476281_linux.tar.gz
sudo cp kfctl /usr/bin

进入root用户下的/root路径执行：

wget https://github.com/kubeflow/manifests/archive/v1.0.2.tar.gz

从https://github.com/kubeflow/manifests/blob/v1.0-branch/kfdef/kfctl_k8s_istio.v1.0.2.yaml拷贝yaml文件到/root路径下，修改该yaml文件，文件末尾处，修改如下：
在这里插入图片描述
在/root路径下编译配置文件：

kfctl build -V -f "/root/kfctl_k8s_istio.v1.0.2.yaml"

提示：root用户下使用kubectl，进入root用户下依次执行：

echo "export KUBECONFIG=/etc/kubernetes/admin.conf" >> ~/.bash_profile

source ~/.bash_profile

编译后生成kustomize文件夹，将kustomize文件夹拷贝到本地目录，通过VSCode软件修改相关配置文件，搜索包含‘imagepull’字段的文件，将所有的镜像拉取策略全部改为“IfNotPresent”。

搜索包含‘gcr.io/knative-releases’字段的文件，打开对应文件，把所有v0.11.0的字眼全部改成v0.9.0，把镜像地址也改成如下图样式：
在这里插入图片描述
其中kustomization.yaml的修改如下，所有项都这么修改：

修改kustomize/bootstrap/base/stateful-set.yaml文件，添加镜像拉取策略：imagePullPolicy: IfNotPresent

创建PV资源，在/root路径下创建4个pv文件，附pv文件内容：
kubeflow-pv1.yaml

apiVersion: v1
kind: PersistentVolume
metadata:
  name: kubeflow-pv1
spec:
  capacity:
    storage: 20Gi
  accessModes:
    - ReadWriteOnce
  hostPath:
    path: "/data1/kubeflow-pv1"

kubeflow-pv2.yaml

apiVersion: v1
kind: PersistentVolume
metadata:
  name: kubeflow-pv2
spec:
  capacity:
    storage: 20Gi
  accessModes:
    - ReadWriteOnce
  hostPath:
    path: "/data1/kubeflow-pv2"

kubeflow-pv3.yaml

apiVersion: v1
kind: PersistentVolume
metadata:
  name: kubeflow-pv3
spec:
  capacity:
    storage: 20Gi
  accessModes:
    - ReadWriteOnce
  hostPath:
    path: "/data1/kubeflow-pv3"

kubeflow-pv4.yaml

apiVersion: v1
kind: PersistentVolume
metadata:
  name: kubeflow-pv4
spec:
  capacity:
    storage: 20Gi
  accessModes:
    - ReadWriteOnce
  hostPath:
    path: "/data1/kubeflow-pv4"

在/root路径下依次执行命令：

kubectl apply -f kubeflow-pv1.yaml
kubectl apply -f kubeflow-pv2.yaml
kubectl apply -f kubeflow-pv3.yaml
kubectl apply -f kubeflow-pv4.yaml

查看创建的PV：

kubectl get pv

拉取镜像，执行image-pull.sh脚本，附脚本内容：

#!/bin/bash
# pull istio images
docker pull istio/sidecar_injector:1.1.6
docker pull istio/proxyv2:1.1.6
docker pull istio/proxy_init:1.1.6
docker pull istio/pilot:1.1.6
docker pull istio/mixer:1.1.6
docker pull istio/galley:1.1.6
docker pull istio/citadel:1.1.6

# pull ml-pipeline images
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/viewer-crd-controller:0.2.5
docker pull registry.cn-hangzhou.aliyuncs.com/wenxinax/ml-pipeline-api-server:0.2.5
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/frontend:0.2.5
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/visualization-server:0.2.5
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/scheduledworkflow:0.2.5
docker pull registry.cn-hangzhou.aliyuncs.com/wenxinax/ml-pipeline-persistenceagent:0.2.5
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/envoy:metadata-grpc

# pull kubeflow-images-public images
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/profile-controller:v1.0.0-ge50a8531
docker pull registry.cn-hangzhou.aliyuncs.com/therenoedge/profile-controller-v20190619-v0-219-gbd3daa8c-dirty-1ced0e:v20190619-v0-219-gbd3daa8c-dirty-1ced0e
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/notebook-controller:v1.0.0-gcd65ce25
docker pull registry.cn-hangzhou.aliyuncs.com/therenoedge/notebook-controller-v20190614-v0-160-g386f2749-e3b0c4:v20190614-v0-160-g386f2749-e3b0c4
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/jupyter-web-app:v1.0.0-g2bd63238
docker pull registry.cn-hangzhou.aliyuncs.com/gfyulx/jupyter-web-app:v0.5.0
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/centraldashboard:v1.0.0-g3ec0de71
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/tf_operator:v1.0.0-g92389064
docker pull registry.cn-hangzhou.aliyuncs.com/therenoedge/tf_operator-kubeflow-tf-operator-postsubmit-v1-5adee6f-6109-a25c:kubeflow-tf-operator-postsubmit-v1-5adee6f-6109-a25c
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/pytorch-operator:v1.0.0-g047cf0f
docker pull registry.cn-hangzhou.aliyuncs.com/therenoedge/pytorch-operator-v0.6.0-18-g5e36a57:v0.6.0-18-g5e36a57
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/katib-ui:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/katib-controller:v0.8.0
# docker pull registry.cn-hangzhou.aliyuncs.com/yuanminglei/katib-db-manager:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/katib/katib-db-manager:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/kfam:v1.0.0-gf3e09203
docker pull registry.cn-hangzhou.aliyuncs.com/therenoedge/kfam-v20190612-v0-170-ga06cdb79-dirty-a33ee4:v20190612-v0-170-ga06cdb79-dirty-a33ee4
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/admission-webhook:v1.0.0-gaf96e4e3
docker pull registry.cn-hangzhou.aliyuncs.com/open-open/admission-webhook:v20190520-v0-139-gcee39dbc-dirty-0d8f4c
# docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/metadata:v0.1.11
docker pull registry.cn-hangzhou.aliyuncs.com/wenxinax/kubeflow-images-public-metadata:v0.1.11
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/metadata-frontend:v0.1.8
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/application:1.0-beta
docker pull registry.cn-hangzhou.aliyuncs.com/wenxinax/kubeflow-images-public-ingress-setup:latest
# pull knative-releases images
docker pull jimmysong/knative-serving-cmd-activator:0.9
docker pull jimmysong/knative-serving-cmd-webhook:0.9
docker pull jimmysong/knative-serving-cmd-controller:0.9
docker pull jimmysong/knative-serving-cmd-networking-istio:0.9
docker pull jimmysong/knative-serving-cmd-autoscaler-hpa:0.9
docker pull jimmysong/knative-serving-cmd-autoscaler:0.9
docker pull jimmysong/knative-serving-cmd-queue:0.9
# pull extra images
docker pull registry.cn-hangzhou.aliyuncs.com/wenxinax/kfserving-kfserving-controller:0.2.2
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow_0/tfx-oss-public-ml_metadata_store_server:v0.21.1
docker pull registry.cn-hangzhou.aliyuncs.com/pigeonw/spark-operator:v1beta2-1.0.0-2.4.4
docker pull registry.cn-hangzhou.aliyuncs.com/kubebuilder/kube-rbac-proxy:v0.4.0
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/spartakus-amd64:v1.1.0
# pull argoproj images
docker pull argoproj/workflow-controller:v2.3.0
docker pull argoproj/argoui:v2.3.0
docker pull tensorflow/tensorflow:1.8.0
docker pull mysql:5.6
docker pull minio/minio:RELEASE.2018-02-09T22-40-05Z
docker pull mysql:8.0.3
docker pull mysql:8
# new add
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-katib/file-metrics-collector:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/hellobike-public/tfevent-metrics-collector:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/kubeflow-katib/suggestion-hyperopt:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-chocolate:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-skopt:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-nasrl:v0.8.0
docker pull registry.cn-hangzhou.aliyuncs.com/therenoedge/viewer-crd-controller-0.1.31:0.1.31
docker pull metacontroller/metacontroller:v0.3.0

镜像重命名，执行image-rename.sh脚本，附脚本内容：

#!/bin/bash

# pull ml-pipeline images
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/viewer-crd-controller:0.2.5 gcr.io/ml-pipeline/viewer-crd-controller:0.2.5
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/viewer-crd-controller:0.2.5
docker tag registry.cn-hangzhou.aliyuncs.com/wenxinax/ml-pipeline-api-server:0.2.5 gcr.io/ml-pipeline/api-server:0.2.5
docker rmi registry.cn-hangzhou.aliyuncs.com/wenxinax/ml-pipeline-api-server:0.2.5
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/frontend:0.2.5 gcr.io/ml-pipeline/frontend:0.2.5
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/frontend:0.2.5
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/visualization-server:0.2.5 gcr.io/ml-pipeline/visualization-server:0.2.5
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/visualization-server:0.2.5
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/scheduledworkflow:0.2.5 gcr.io/ml-pipeline/scheduledworkflow:0.2.5
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/scheduledworkflow:0.2.5
docker tag registry.cn-hangzhou.aliyuncs.com/wenxinax/ml-pipeline-persistenceagent:0.2.5 gcr.io/ml-pipeline/persistenceagent:0.2.5
docker rmi registry.cn-hangzhou.aliyuncs.com/wenxinax/ml-pipeline-persistenceagent:0.2.5
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/envoy:metadata-grpc gcr.io/ml-pipeline/envoy:metadata-grpc
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/envoy:metadata-grpc
# pull kubeflow-images-public images
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/profile-controller:v1.0.0-ge50a8531 gcr.io/kubeflow-images-public/profile-controller:v1.0.0-ge50a8531
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/profile-controller:v1.0.0-ge50a8531
docker tag registry.cn-hangzhou.aliyuncs.com/therenoedge/profile-controller-v20190619-v0-219-gbd3daa8c-dirty-1ced0e:v20190619-v0-219-gbd3daa8c-dirty-1ced0e gcr.io/kubeflow-images-public/profile-controller:v20190619-v0-219-gbd3daa8c-dirty-1ced0e
docker rmi registry.cn-hangzhou.aliyuncs.com/therenoedge/profile-controller-v20190619-v0-219-gbd3daa8c-dirty-1ced0e:v20190619-v0-219-gbd3daa8c-dirty-1ced0e
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/notebook-controller:v1.0.0-gcd65ce25 gcr.io/kubeflow-images-public/notebook-controller:v1.0.0-gcd65ce25
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/notebook-controller:v1.0.0-gcd65ce25
docker tag registry.cn-hangzhou.aliyuncs.com/therenoedge/notebook-controller-v20190614-v0-160-g386f2749-e3b0c4:v20190614-v0-160-g386f2749-e3b0c4 gcr.io/kubeflow-images-public/notebook-controller:v20190614-v0-160-g386f2749-e3b0c4
docker rmi registry.cn-hangzhou.aliyuncs.com/therenoedge/notebook-controller-v20190614-v0-160-g386f2749-e3b0c4:v20190614-v0-160-g386f2749-e3b0c4
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/katib-ui:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/katib-ui:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/katib-ui:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/katib-controller:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/katib-controller:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/katib-controller:v0.8.0
# docker tag registry.cn-hangzhou.aliyuncs.com/yuanminglei/katib-db-manager:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/katib-db-manager:v0.8.0
# docker rmi registry.cn-hangzhou.aliyuncs.com/yuanminglei/katib-db-manager:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/katib/katib-db-manager:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/katib-db-manager:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/katib/katib-db-manager:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/jupyter-web-app:v1.0.0-g2bd63238 gcr.io/kubeflow-images-public/jupyter-web-app:v1.0.0-g2bd63238
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/jupyter-web-app:v1.0.0-g2bd63238
docker tag registry.cn-hangzhou.aliyuncs.com/gfyulx/jupyter-web-app:v0.5.0 gcr.io/kubeflow-images-public/jupyter-web-app:v0.5.0
docker rmi registry.cn-hangzhou.aliyuncs.com/gfyulx/jupyter-web-app:v0.5.0
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/centraldashboard:v1.0.0-g3ec0de71 gcr.io/kubeflow-images-public/centraldashboard:v1.0.0-g3ec0de71
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/centraldashboard:v1.0.0-g3ec0de71
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/tf_operator:v1.0.0-g92389064 gcr.io/kubeflow-images-public/tf_operator:v1.0.0-g92389064
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/tf_operator:v1.0.0-g92389064
docker tag registry.cn-hangzhou.aliyuncs.com/therenoedge/tf_operator-kubeflow-tf-operator-postsubmit-v1-5adee6f-6109-a25c:kubeflow-tf-operator-postsubmit-v1-5adee6f-6109-a25c gcr.io/kubeflow-images-public/tf_operator:kubeflow-tf-operator-postsubmit-v1-5adee6f-6109-a25c
docker rmi registry.cn-hangzhou.aliyuncs.com/therenoedge/tf_operator-kubeflow-tf-operator-postsubmit-v1-5adee6f-6109-a25c:kubeflow-tf-operator-postsubmit-v1-5adee6f-6109-a25c
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/pytorch-operator:v1.0.0-g047cf0f gcr.io/kubeflow-images-public/pytorch-operator:v1.0.0-g047cf0f
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/pytorch-operator:v1.0.0-g047cf0f
docker tag registry.cn-hangzhou.aliyuncs.com/therenoedge/pytorch-operator-v0.6.0-18-g5e36a57:v0.6.0-18-g5e36a57 gcr.io/kubeflow-images-public/pytorch-operator:v0.6.0-18-g5e36a57
docker rmi registry.cn-hangzhou.aliyuncs.com/therenoedge/pytorch-operator-v0.6.0-18-g5e36a57:v0.6.0-18-g5e36a57
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/kfam:v1.0.0-gf3e09203 gcr.io/kubeflow-images-public/kfam:v1.0.0-gf3e09203
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/kfam:v1.0.0-gf3e09203
docker tag registry.cn-hangzhou.aliyuncs.com/therenoedge/kfam-v20190612-v0-170-ga06cdb79-dirty-a33ee4:v20190612-v0-170-ga06cdb79-dirty-a33ee4 gcr.io/kubeflow-images-public/kfam:v20190612-v0-170-ga06cdb79-dirty-a33ee4
docker rmi registry.cn-hangzhou.aliyuncs.com/therenoedge/kfam-v20190612-v0-170-ga06cdb79-dirty-a33ee4:v20190612-v0-170-ga06cdb79-dirty-a33ee4
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/admission-webhook:v1.0.0-gaf96e4e3 gcr.io/kubeflow-images-public/admission-webhook:v1.0.0-gaf96e4e3
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/admission-webhook:v1.0.0-gaf96e4e3
docker tag registry.cn-hangzhou.aliyuncs.com/open-open/admission-webhook:v20190520-v0-139-gcee39dbc-dirty-0d8f4c gcr.io/kubeflow-images-public/admission-webhook:v20190520-v0-139-gcee39dbc-dirty-0d8f4c
docker rmi registry.cn-hangzhou.aliyuncs.com/open-open/admission-webhook:v20190520-v0-139-gcee39dbc-dirty-0d8f4c
# docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/metadata:v0.1.11 gcr.io/kubeflow-images-public/metadata:v0.1.11
# docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/metadata:v0.1.11
docker tag registry.cn-hangzhou.aliyuncs.com/wenxinax/kubeflow-images-public-metadata:v0.1.11 gcr.io/kubeflow-images-public/metadata:v0.1.11
docker rmi registry.cn-hangzhou.aliyuncs.com/wenxinax/kubeflow-images-public-metadata:v0.1.11
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/metadata-frontend:v0.1.8 gcr.io/kubeflow-images-public/metadata-frontend:v0.1.8
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/metadata-frontend:v0.1.8
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/application:1.0-beta gcr.io/kubeflow-images-public/kubernetes-sigs/application:1.0-beta
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-images-public/application:1.0-beta
docker tag registry.cn-hangzhou.aliyuncs.com/wenxinax/kubeflow-images-public-ingress-setup:latest gcr.io/kubeflow-images-public/ingress-setup:latest
docker rmi registry.cn-hangzhou.aliyuncs.com/wenxinax/kubeflow-images-public-ingress-setup:latest
# pull knative-releases images
docker tag jimmysong/knative-serving-cmd-activator:0.9 gcr.io/knative-releases/knative.dev/serving/cmd/activator:v0.9.0
docker rmi jimmysong/knative-serving-cmd-activator:0.9
docker tag jimmysong/knative-serving-cmd-webhook:0.9 gcr.io/knative-releases/knative.dev/serving/cmd/webhook:v0.9.0
docker rmi jimmysong/knative-serving-cmd-webhook:0.9
docker tag jimmysong/knative-serving-cmd-controller:0.9 gcr.io/knative-releases/knative.dev/serving/cmd/controller:v0.9.0
docker rmi jimmysong/knative-serving-cmd-controller:0.9
docker tag jimmysong/knative-serving-cmd-networking-istio:0.9 gcr.io/knative-releases/knative.dev/serving/cmd/networking/istio:v0.9.0
docker rmi jimmysong/knative-serving-cmd-networking-istio:0.9
docker tag jimmysong/knative-serving-cmd-autoscaler-hpa:0.9 gcr.io/knative-releases/knative.dev/serving/cmd/autoscaler-hpa:v0.9.0
docker rmi jimmysong/knative-serving-cmd-autoscaler-hpa:0.9
docker tag jimmysong/knative-serving-cmd-autoscaler:0.9 gcr.io/knative-releases/knative.dev/serving/cmd/autoscaler:v0.9.0
docker rmi jimmysong/knative-serving-cmd-autoscaler:0.9
docker tag jimmysong/knative-serving-cmd-queue:0.9 gcr.io/knative-releases/knative.dev/serving/cmd/queue:v0.9.0
docker rmi jimmysong/knative-serving-cmd-queue:0.9
# pull extra images
docker tag registry.cn-hangzhou.aliyuncs.com/wenxinax/kfserving-kfserving-controller:0.2.2 gcr.io/kfserving/kfserving-controller:0.2.2
docker rmi registry.cn-hangzhou.aliyuncs.com/wenxinax/kfserving-kfserving-controller:0.2.2
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow_0/tfx-oss-public-ml_metadata_store_server:v0.21.1 gcr.io/tfx-oss-public/ml_metadata_store_server:v0.21.1
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow_0/tfx-oss-public-ml_metadata_store_server:v0.21.1
docker tag registry.cn-hangzhou.aliyuncs.com/pigeonw/spark-operator:v1beta2-1.0.0-2.4.4 gcr.io/spark-operator/spark-operator:v1beta2-1.0.0-2.4.4
docker rmi registry.cn-hangzhou.aliyuncs.com/pigeonw/spark-operator:v1beta2-1.0.0-2.4.4
docker tag registry.cn-hangzhou.aliyuncs.com/kubebuilder/kube-rbac-proxy:v0.4.0 gcr.io/kubebuilder/kube-rbac-proxy:v0.4.0
docker rmi registry.cn-hangzhou.aliyuncs.com/kubebuilder/kube-rbac-proxy:v0.4.0
docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/spartakus-amd64:v1.1.0 gcr.io/google_containers/spartakus-amd64:v1.1.0
docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/spartakus-amd64:v1.1.0
# new add
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-katib/file-metrics-collector:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/file-metrics-collector:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-katib/file-metrics-collector:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/hellobike-public/tfevent-metrics-collector:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/tfevent-metrics-collector:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/hellobike-public/tfevent-metrics-collector:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/kubeflow-katib/suggestion-hyperopt:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/suggestion-hyperopt:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/kubeflow-katib/suggestion-hyperopt:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-chocolate:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/suggestion-chocolate:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-chocolate:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-skopt:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/suggestion-skopt:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-skopt:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-nasrl:v0.8.0 gcr.io/kubeflow-images-public/katib/v1alpha3/suggestion-nasrl:v0.8.0
docker rmi registry.cn-hangzhou.aliyuncs.com/morningsong/suggestion-nasrl:v0.8.0
docker tag registry.cn-hangzhou.aliyuncs.com/therenoedge/viewer-crd-controller-0.1.31:0.1.31 gcr.io/ml-pipeline/viewer-crd-controller:0.1.31
docker rmi registry.cn-hangzhou.aliyuncs.com/therenoedge/viewer-crd-controller-0.1.31:0.1.31

安装kubeflow，在/root路径下执行：

kfctl apply -V -f "/root/kfctl_k8s_istio.v1.0.2.yaml"

等待安装完成，如果出错，重新执行上面命令
查看pod情况：

kubectl get pod -n Kubeflow

提示：kubernetes使用calico网络插件导致某些pod起不来，所以选择flannel网络插件

**划重点：**带minmo标签的pod出错，该pod问题会连带其它pod启动出现问题，是由于pv资源创建出错，通过kubectl describe pod xxxxxx -n kubeflow命令查看具体错误信息，需要进入/data1目录，创建文件夹kubeflow-pv2（根据报错实际情况创建所需的文件夹）即可解决

启动kubeflow ui

nohup kubectl port-forward -n istio-system svc/istio-ingressgateway 8088:80 --address=0.0.0.0 &

至此，kubeflow部署完毕，欢迎大家点赞收藏留言^^

哎哟喂〤

关注

1
点赞
踩
4

收藏

觉得还不错? 一键收藏
1
评论
Ubuntu一站式搭建Kubernetes与Kubeflow

Ubuntu环境下Kubernetes与Kubeflow一站式搭建前言服务器系统：ubuntu16.04服务器网络：192.168.51.6Kubernetes版本：1.16.3Docker版本：18.09.8Kubeflow版本：1.0.2提示：Kubernetes可以是单节点集群或是多节点集群，master节点的部署方式与node节点的部署方式略有不同，稍后会有详细说明，旨在帮助大家快速部署，减少踩坑，点赞收藏哦一、配置要求服务器硬件配置需求此处不做赘述，当然大家的机器配置越
复制链接

扫一扫