Jetson Nano 移植ncnn

最新推荐文章于 2025-09-19 14:13:31 发布

原创

最新推荐文章于 2025-09-19 14:13:31 发布 · 811 阅读

1 ·

CC 4.0 BY-SA版权

文章标签：

#机器学习

本文详细介绍了如何在Jetson Nano上进行ncnn的编译与安装过程，包括所有必要的步骤和注意事项，确保在完成后能成功进行机器学习模型的测试。

编译&安装

# a fresh start
$ sudo apt-get update
$ sudo apt-get upgrade
# install dependencies
$ sudo apt-get install cmake wget
$ sudo apt-get install libprotobuf-dev protobuf-compiler libvulkan-dev
# download ncnn
$ git clone --depth=1 https://github.com/Tencent/ncnn.git
# download glslang
$ cd ncnn
$ git submodule update --depth=1 --init
# prepare folders
$ mkdir build
$ cd build
# build 64-bit ncnn for Jetson Nano
$ cmake -DCMAKE_TOOLCHAIN_FILE=../toolchains/jetson.toolchain.cmake -DNCNN_VULKAN=ON -DCMAKE_BUILD_TYPE=Release ..
$ make -j4
$ sudo make install

测试

$ cd ../benchmark
$ cp ../build/benchmark/benchncnn ./
$ ./benchncnn 8 4 0 -1 1
loop_count = 8
num_threads = 4
powersave = 0
gpu_device = -1
cooling_down = 1
          squeezenet  min =   30.36  max =   93.72  avg =   43.04
     squeezenet_int8  min =   32.96  max =   63.76  avg =   41.03
           mobilenet  min =   40.13  max =  158.23