电脑装系统后，一直循环this product is covered by one of more of the following

最新推荐文章于 2023-04-01 16:46:25 发布
最新推荐文章于 2023-04-01 16:46:25 发布
阅读量2.5k 收藏 2
点赞数 1
分类专栏： 笔记
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_40454887/article/details/122628064
版权

在这里插入图片描述
this product is covered by one or more of the following patents:US5,307,459,US5,434,872… realtek pci express fast ethernet controller series v2.5
pxe-mof: exiting pxe rom
一直循环上面说明安装系统步骤有问题。
1.格式化c盘
2.分配c盘
3.设置主引导
4.激活c盘分区
5.正常装系统步骤装入C盘

Yoho001
关注
  • 1
    点赞
  • 踩
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
windows之电脑开机出现 this product is covered by one or more of the following prtents
weixin_30799995的博客
04-13 4762
电脑开机出现 this product is covered by one or more of the following prtents 有次意外断电后就每次都出现这个提示，然后要等检查完才能进入系统，按ESC可以跳过。这个到底是什么意思啊。 解决办法： 这是由于网卡启用了BOOT ROM芯片的引导功能。可以在bios里面修改配置:开机按Del键，进入BIOS－>Integ...
Hacking a Terror Network The Silent Threat of Covert Channels
10-03
Written by a certified Arabic linguist from the Defense Language Institute with extensive background in decoding encrypted communications, this cyber-thriller uses a fictional narrative to provide a ...
笔记本开机循环显示：this product is covered by one or more of the following patents 解决办法
CanieLau的专栏
04-18 4万+
      电脑开机就显示：This product is covered by one or more of the following patents:US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625realtek pci express fast ethernet controller series v1.7(090506)pxe-e61:media test failure,check c
This Product is covered by one or more of the following......的问题
weixin_30333885的博客
02-28 4007
DELL台式机安装ubuntu后无法正常启动，黑屏显示：This Product is covered by one or more of the following...... 解决方案：进入BIOS，讲Boot选项改为elf，或手动切换到Boot list，选择从ubuntu启动。 转载于:https://www.cnblogs.com/lzhu/p/10448891.ht...
开机黑屏显示html,开机黑屏显示“This Product is covered by”解决方法
weixin_36362326的博客
06-22 5250
电脑开机黑屏的原因多种多样，想要快速找到问题的根源，就需了解开机黑屏的报错提示，下面快启动小编为大家分享开机黑屏显示“This Product iscovered by one or more of the folloWing patents”的解决方法，想要了解的小白们一定要认真看看吧。一、硬盘找不到了(坏了或者是线断了)打开机箱，拔下硬盘现重新插上，试试看!如果还不行的话，进PE如果发现不了硬...
This product is covered by one or more of the following patents
qq_44795091的博客
04-01 995
问题出现原因：主机太久没开机了，主板默认把uefi改为了legacy。进入bios设置，将boot filter设置为uefi。
台式电脑(ubuntu系统)开机界面循环This product is covered by one or more of the following patents
weixin_42963900的博客
12-10 1490
台式电脑(ubuntu系统)开机界面循环This product is covered by one or more of the following patents
this product is covered by one or more of the following
liu243373142的专栏
09-17 1万+
机型：戴尔n5110 笔记本 起因：安装由虚拟光驱加载的iso系统； 结果：电脑无法正常开机，显示 This product is covered by one or more of the following patents:US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,3
practical internet of things with javascript
10-05
In this world of technology upgrades, IoT is currently leading with its promise to make the world a more smarter and efficient place. This book will show you how to build simple IoT solutions that ...
Active control of near-field radiative heat transfer between graphene-covered metamaterials
02-21
Active control of near-field radiative heat transfer between graphene-covered metamaterials
The Science of Biometrics: Security Technology for Identity Verification
01-31
After this review, numerous applications of these two modalities are covered as well, some of which have just been commercially deployed while others are under research and development. Chapters 3 ...
This Product is covered by one or more of the folloWing patents
weixin_30912051的博客
12-16 2303
借用一下网络图片，作为描述： 原因： 启动方式使用了网络启动， 解决方案： 进入bios，修改启动方式，禁用网卡驱动，使用从硬盘启动或者从U盘启动即可。 转载于:https://www.cnblogs.com/amwuau/p/8048005.html...
换硬盘装系统（1）
drunkpragrammer的博客
10-08 1899
这是我自己第一次动手换下损坏的硬盘，装ssd试试。   因为手上有两台坏了硬盘的电脑，所以一个ssd，要用它来测试是否只有硬盘损坏。神舟电脑装上固态，制作好u盘启动盘（我用的大白菜u盘启动盘制作工具），diskgenuis设置好分区，网上下一个windows的iso或者gho系统文件（我用的雨木林风系统）到u盘里，装完系统后，重启，等待安装服务和驱动（自动安装），没有问题。asus电脑装上后，重
吐血总结：解决 Reboot and select proper boot device or ......以及其它蓝屏黑屏
热门推荐
待到春花烂漫时
08-01 12万+
程序猿一枚，笔记本用了两年了，被我鼓捣的死去活来，难免会跟我闹些“小别扭”，借助各种黑屏蓝屏对我“发脾气”~ 开始还好（一年前），一些小错误还都镇的住，免去了重装系统带来的麻烦。近来不知怎地，各种傲娇，疯狂蓝屏、自动重启外加重启后黑屏，最让我头疼的就是Reboot and select proper boot device or。。。这个错误，以前都还好，出现这个错误之后进入BIOS面板来回调...
linux系统在启动过程中mbr主引导程序被破坏的解决方案
jay_youth的博客
05-15 2206
   在使用linux的过程中，我们可能有时侯会破坏磁盘上的引导程序，使磁头找不到/boot分区，这时候，我们需要采取一些措施重新启动系统。 1.我们模拟一下引导程序被破坏的情况   dd if =/dev/zero of=/dev/vda bs=446 count=1    2.reboot系统后我们发现虚拟机不能重启了3.在真机中打开一个shell，输入命令virt-manager4.选中se...
电脑突然自动关机，重新开机后黑屏显示 如下
iteye_6988的博客
12-03 2381
电脑突然自动关机，重新开机后黑屏显示 如下 2012-05-26 16:49xiaoziwawawa | 分类：Windows | 浏览532次 Intel UNDI , PXE-2.1 (build 083) Copyright (c) 1997-2000 Intel Corporation This Product is covered by one or more of...
电脑开机不久就自动关机，并且要拔掉电源插头后再插回去才能再次启动的问题原因和解决方法
CanieLau的专栏
06-23 1万+
  这种情况有三种可能； 1、最常见的,cpu散热不好，可能是风扇坏了，或风扇装不好，导致散热不好。 2、电源有问题。 3、电路板有电容暴烈。 解决方法：先查看散热问题和电路板是否有电容坏掉，还不行再换一个电源试一下。
c语言前端设计思路介绍文档
最新发布
07-11
c语言前端设计思路介绍文档
There is a light sensor on your picoprobe development board. This question asks you to use this sensor to measure the ambient light and to control the three LEDs on the picoprobe board to make a night light. Configure your program to perform the following steps, after printing the message from Question 1. The steps should be repeated every 1 second. raw ADC result in the format shown below: Light Sensor: Raw: _____ (insert the actual value) (15 marks) (b) Convert the raw value to a voltage and print out the voltage that you calculated in the format displayed below. At least one decimal place is required. Voltage: _____ V (insert the actual value) (10 marks) (c) Use this voltage to control the three-colour LED to show a white colour, when the light sensor is covered by a piece of paper (e.g. when the room is getting dark). The white-coloured light will go off, as soon as the ambient light is high again, i.e. when the light sensor is exposed to normal room light. This is reminiscent of an automatic night light.
06-03
Sure, here's how you can use the light sensor on the picoprobe development board to create a night light: (a) 1. Initialize the ADC to read from the light sensor. 2. Read the raw ADC value from the light sensor. 3. Print out the raw ADC value in the format "Light Sensor: Raw: [value]". 4. Convert the raw ADC value to a voltage using the formula: voltage = (raw_value * 3.3) / 4095, where 3.3 is the maximum voltage and 4095 is the maximum raw ADC value. 5. Print out the voltage value in the format "Voltage: [value] V". 6. Use the voltage value to control the three-colour LED. (b) Here's some sample code to perform the above steps: ```c #include <stdio.h> #include "pico/stdlib.h" #include "hardware/adc.h" #include "hardware/gpio.h" #define LED_RED 25 #define LED_GREEN 26 #define LED_BLUE 27 #define LIGHT_SENSOR 2 int main() { stdio_init_all(); adc_init(); adc_gpio_init(LIGHT_SENSOR); adc_select_input(LIGHT_SENSOR); gpio_init(LED_RED); gpio_set_dir(LED_RED, GPIO_OUT); gpio_init(LED_GREEN); gpio_set_dir(LED_GREEN, GPIO_OUT); gpio_init(LED_BLUE); gpio_set_dir(LED_BLUE, GPIO_OUT); while (1) { uint16_t raw_value = adc_read(); printf("Light Sensor: Raw: %d\n", raw_value); float voltage = (raw_value * 3.3) / 4095; printf("Voltage: %.1f V\n", voltage); if (voltage < 1.0) { // dim the LEDs when the room is dark gpio_put(LED_RED, 255); gpio_put(LED_GREEN, 255); gpio_put(LED_BLUE, 255); } else { // turn off the LEDs when there is enough ambient light gpio_put(LED_RED, 0); gpio_put(LED_GREEN, 0); gpio_put(LED_BLUE, 0); } sleep_ms(1000); } return 0; } ``` (c) In the above code, we are dimming all three LEDs to create white light when the room is dark and turning them off when there is enough ambient light. The threshold voltage for detecting darkness is set at 1.0 V in this example, but you can adjust it to suit your needs.

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值