一、在对话框类中(.h文件)定义如下变量和函数
void ReSize();
POINT old;
afx_msg void OnSize(UINT nType, int cx, int cy);
二、在初始化函数OnInitDialog()中,添加如下代码(位置如下图所示)
CRect rect;
GetClientRect(&rect); //取客户区大小
old.x=rect.right-rect.left;
old.y=rect.bottom-rect.top;
三、添加 WM_SIZE消息
在资源视图下打开窗口属性,在消息选项中找到WM_SIZE,添加Onsize
添加完之后,程序中会出现OnSize函数,此时在TODO下方添加代码如下:
void CStuDemoDlg::OnSize(UINT nType, int cx, int cy)
{
CDialog::OnSize(nType, cx, cy);
// TODO: Add your message handler code here
if (nType==SIZE_RESTORED||nType==SIZE_MAXIMIZED)
{
ReSize();
}
}
四、刷新控件函数
对ReSize函数进行定义(位置放在.cpp文件中即可)
void CStuDemoDlg::ReSize()
{
float fsp[2];
POINT Newp; //获取现在对话框的大小
CRect recta;
GetClientRect(&recta); //取客户区大小
Newp.x=recta.right-recta.left;
Newp.y=recta.bottom-recta.top;
fsp[0]=(float)Newp.x/old.x;
fsp[1]=(float)Newp.y/old.y;
CRect Rect;
int woc;
CPoint OldTLPoint,TLPoint; //左上角
CPoint OldBRPoint,BRPoint; //右下角
HWND hwndChild=::GetWindow(m_hWnd,GW_CHILD); //列出所有控件
while(hwndChild)
{
woc=::GetDlgCtrlID(hwndChild);//取得ID
GetDlgItem(woc)->GetWindowRect(Rect);
ScreenToClient(Rect);
OldTLPoint = Rect.TopLeft();
TLPoint.x = long(OldTLPoint.x*fsp[0]);
TLPoint.y = long(OldTLPoint.y*fsp[1]);
OldBRPoint = Rect.BottomRight();
BRPoint.x = long(OldBRPoint.x *fsp[0]);
BRPoint.y = long(OldBRPoint.y *fsp[1]);
Rect.SetRect(TLPoint,BRPoint);
GetDlgItem(woc)->MoveWindow(Rect,TRUE);
hwndChild=::GetWindow(hwndChild, GW_HWNDNEXT);
}
old=Newp;
}