转载自:https://blog.csdn.net/qqliyunpeng/article/details/72884430
开发板设置静态ip和linux设置静态ip是一个问题。
1. 更改网络接口配合文件
具体位置在 /etc/network/interfaces
在最后,或者找到auto eth0,我们将
auto eth0
iface eth0 inet dhcp更改成iface eth0 inet static
address 192.168.1.xx
netmask 255.255.255.0
network 192.168.0.0 [这里是非必须的]
gateway 192.168.0.200 [这里是非必须的]
2. 更改开机启动后执行的脚本(如果有的话)
添加如下
#!/bin/sh
echo ifconfig eth0
ifconfig eth0 172.16.8.203 netmask 255.255.255.0
ifconfig eth0 down
ifconfig eth0 up
echo ifconfig lo
ifconfig lo 127.0.0.1 netmask 255.0.0.0
ifconfig lo down
ifconfig lo up
echo ifconfig eth0
ifconfig eth0 172.16.8.203 netmask 255.255.255.0
ifconfig eth0 down
ifconfig eth0 up
echo ifconfig lo
ifconfig lo 127.0.0.1 netmask 255.0.0.0
ifconfig lo down
ifconfig lo up
3. 当然如果你是临时的想改一下,当重启后恢复默认,可以如下
> ifconfig eth0 10.150.11.2 netmask 255.254.0.0