网卡ens 33解决只显示inet6不显示inet4问题

[root@localhost ~]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::79ee:9b4e:d4b1:f4a4 prefixlen 64 scopeid 0x20
ether 00:0c:29:cb:fc:a7 txqueuelen 1000 (Ethernet)
RX packets 649317 bytes 954999637 (910.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 217454 bytes 13238591 (12.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:6a:53:bc txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[root@localhost ~]# cd /etc
[root@localhost etc]# cd sysconfig
[root@localhost sysconfig]# cd network-scripts
[root@localhost network-scripts]# vi ifcfg-ens33
修改ifcfg-ens33文档
修改点：IPV6INIT="yes"
如果一开始就没有IP地址显示，修改点：ONBOOT=yes
保存退出

[root@localhost network-scripts]# vi ifcfg-ens33
重启网卡
[root@localhost network-scripts]# cd /etc/init.d
[root@localhost init.d]# service network restart
Restarting network (via systemctl): [ 确定 ]
[root@localhost init.d]# cd /root
[root@localhost ~]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.204.128 netmask 255.255.255.0 broadcast 192.168.204.255
inet6 fe80::20c:29ff:fecb:fca7 prefixlen 64 scopeid 0x20
ether 00:0c:29:cb:fc:a7 txqueuelen 1000 (Ethernet)
RX packets 649636 bytes 955019973 (910.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 217533 bytes 13249037 (12.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 8 bytes 704 (704.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 704 (704.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:6a:53:bc txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
【解决】