服务器IPMItool工具常见参数

PS C:\Users\Administrator\Desktop\IPMIToolWin1.8.18> .\ipmitool.exe -H $BMCIP -U $bmcuser -P $password -I lanplus -h
ipmitool version 1.8.18

usage: ipmitool [options…]

   -h             This help
   -V             Show version information
   -v             Verbose (can use multiple times)
   -c             Display output in comma separated format
   -d N           Specify a /dev/ipmiN device to use (default=0)
   -I intf        Interface to use
   -H hostname    Remote host name for LAN interface
   -p port        Remote RMCP port [default=623]
   -U username    Remote session username
   -f file        Read remote session password from file
   -z size        Change Size of Communication Channel (OEM)
   -S sdr         Use local file for remote SDR cache
   -D tty:b[:s]   Specify the serial device, baud rate to use
                  and, optionally, specify that interface is the system one
   -4             Use only IPv4
   -6             Use only IPv6
   -a             Prompt for remote password
   -Y             Prompt for the Kg key for IPMIv2 authentication
   -e char        Set SOL escape character
   -C ciphersuite Cipher suite to be used by lanplus interface
   -k key         Use Kg key for IPMIv2 authentication
   -y hex_key     Use hexadecimal-encoded Kg key for IPMIv2 authentication
   -L level       Remote session privilege level [default=ADMINISTRATOR]
                  Append a '+' to use name/privilege lookup in RAKP1
   -A authtype    Force use of auth type NONE, PASSWORD, MD2, MD5 or OEM
   -P password    Remote session password
   -E             Read password from IPMI_PASSWORD environment variable
   -K             Read kgkey from IPMI_KGKEY environment variable
   -m address     Set local IPMB address
   -b channel     Set destination channel for bridged request
   -t address     Bridge request to remote target address
   -B channel     Set transit channel for bridged request (dual bridge)
   -T address     Set transit address for bridge request (dual bridge)
   -l lun         Set destination lun for raw commands
   -o oemtype     Setup for OEM (use 'list' to see available OEM types)
   -O seloem      Use file for OEM SEL event descriptions
   -N seconds     Specify timeout for lan [default=2] / lanplus [default=1] interface
   -R retry       Set the number of retries for lan/lanplus interface [default=4]

Interfaces:
lan IPMI v1.5 LAN Interface [default]
lanplus IPMI v2.0 RMCP+ LAN Interface
serial-terminal Serial Interface, Terminal Mode
serial-basic Serial Interface, Basic Mode

Commands:
raw Send a RAW IPMI request and print response
i2c Send an I2C Master Write-Read command and print response
spd Print SPD info from remote I2C device
lan Configure LAN Channels
chassis Get chassis status and set power state
power Shortcut to chassis power commands
event Send pre-defined events to MC
mc Management Controller status and global enables
sdr Print Sensor Data Repository entries and readings
sensor Print detailed sensor information
fru Print built-in FRU and scan SDR for FRU locators
gendev Read/Write Device associated with Generic Device locators sdr
sel Print System Event Log (SEL)
pef Configure Platform Event Filtering (PEF)
sol Configure and connect IPMIv2.0 Serial-over-LAN
tsol Configure and connect with Tyan IPMIv1.5 Serial-over-LAN
isol Configure IPMIv1.5 Serial-over-LAN
user Configure Management Controller users
channel Configure Management Controller channels
session Print session information
dcmi Data Center Management Interface
nm Node Manager Interface
sunoem OEM Commands for Sun servers
kontronoem OEM Commands for Kontron devices
picmg Run a PICMG/ATCA extended cmd
fwum Update IPMC using Kontron OEM Firmware Update Manager
firewall Configure Firmware Firewall
delloem OEM Commands for Dell systems
exec Run list of commands from file
set Set runtime variable for shell and exec
hpm Update HPM components using PICMG HPM.1 file
ekanalyzer run FRU-Ekeying analyzer using FRU files
ime Update Intel Manageability Engine Firmware
vita Run a VITA 46.11 extended cmd
lan6 Configure IPv6 LAN Channels