STM32F103定时器中断

STM32F103定时器中断代码，1S中断一次。我采用TIM5做例子。

/*************************************************************************************************************************/
void Tim5_Init(void)
{     
  NVIC_InitTypeDef NVIC_InitStructure;
  TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
  
  uint32_t _period;
  uint16_t _prescaler;
  
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM5, ENABLE);
  
  _period = 0xFFFF;
  _prescaler = 72000000 / 100000;
  
  TIM_TimeBaseStructure.TIM_Period  = _period;
  TIM_TimeBaseStructure.TIM_Prescaler = _prescaler;
  TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
  TIM_TimeBaseInit(TIM5, &TIM_TimeBaseStructure);
  
	TIM_ITConfig(TIM5,TIM_IT_Update,ENABLE);				// 允许更新中断
  NVIC_InitStructure.NVIC_IRQChannel = TIM5_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x04;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority   = 0x00;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
  
  TIM_Cmd(TIM5, ENABLE);
}
/*************************************************************************************************************************/
void TIM5_IRQHandler(void)
{
  if (TIM_GetITStatus(TIM5, TIM_IT_Update) == SET)
    { 
      LED_DEBUG = !LED_DEBUG;				
    }
		TIM_ClearITPendingBit(TIM5, TIM_IT_Update);
}