解决 Cents 7 的安装之后没有显示ip地址的问题！

1，今天没事想去linux去发布下项目，使用了cents 7 版本的镜像
，安装完成后准备yum一个上传下载工具，发现报以下错误
    已加载插件：fastestmirror, langpacks
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; 未知的错误"

 One of the configured repositories failed (未知),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Disable the repository, so yum won't use it by default. Yum will then
        just ignore the repository until you permanently enable it again or use
        --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>

     4. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: base/7/x86_64

然后ping了一下主机，发现ping不通，然后查看下ip，发现得到一串0.0.之类的，

很明显，网卡有问题，那先解决网卡问题，查了下，6.5版本的与 7 的不同，

7 的是安装镜像时并不会开通网卡，需要去etc/sysconfig/network-scipts下的网卡配置文件ifcfg-eno16777736 ，

打开，将其中noboot=no改成noboot=yes就OK，

这里注意，一般管理员没有可改写此文件的权限，可赋予权限，或者切换成root用户再去操作，然后重启网卡（service netwrok restart）即可.

然后ifconfig就可以看见自己的ip了，重新安装工具也成功了。