实验三RIP router-policy

1、 R2 的10.0.1.1和10.0.2.1不能到R1上
2、 R1的四个静态路由1.1.1.1 32不能进入R2
1、 在R2上用ACL2000匹配1.1 2.1流量，拒绝通过

使用在出口S4/0/0上限制出去

2、在R1上静态路由
Destination/Mask Proto Pre Cost Flags NextHop Interface

    1.0.0.0/8   Static  60   0           D   0.0.0.0         NULL0
    1.1.0.0/16  Static  60   0           D   0.0.0.0         NULL0
    1.1.1.0/24  Static  60   0           D   0.0.0.0         NULL0
    1.1.1.0/25  Static  60   0           D   0.0.0.0         NULL0
    1.1.1.1/32  Static  60   0           D   0.0.0.0         NULL0

ACL匹配除了1.1.1.1 32这条路由
在R1上使用route-policy


R1配置：

acl number 2000  
	 step 10
	 rule 10 permit source 1.1.0.0 0 
	 rule 15 deny source 1.1.1.1 0 
	 rule 20 permit source 1.1.1.0 0.0.0.127 
interface Serial4/0/0
     ip address 10.0.12.1 255.255.255.0 
rip 1
	 undo summary
	 version 2
	 network 10.0.0.0
	 import-route static route-policy import-rip
route-policy import-rip permit node 10 
     if-match acl 2000 
ip route-static 1.0.0.0 255.0.0.0 NULL0
ip route-static 1.1.0.0 255.255.0.0 NULL0
ip route-static 1.1.1.0 255.255.255.0 NULL0
ip route-static 1.1.1.0 255.255.255.128 NULL0
ip route-static 1.1.1.1 255.255.255.255 NULL0

R2配置

acl number 2000  
     rule 5 deny source 10.0.1.0 0.0.254.255 
interface Serial4/0/0
     ip address 10.0.12.2 255.255.255.0 
interface LoopBack0
      ip address 10.0.1.1 255.255.255.255 
interface LoopBack1
      ip address 10.0.2.1 255.255.255.0 
interface LoopBack2
      ip address 10.0.3.1 255.255.255.0 
interface LoopBack3
      ip address 10.0.4.1 255.255.255.0 
rip 1
		 undo summary
		 version 2
		 network 10.0.0.0
		 filter-policy 2000 export Serial4/0/0
		 import-route direct