wpa_supplicant的log中四次握手分析

最新推荐文章于 2023-02-13 11:15:19 发布
最新推荐文章于 2023-02-13 11:15:19 发布
阅读量1.6k 收藏 7
点赞数 3
文章标签： wpa_supplicnat 四次握手 wifi Andrdid
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_43804080/article/details/99972474
版权

wpa_supplicant的log中四次握手分析
wlan的状态变化：
在这里插入图片描述
log不全，截取的部分。用的9.0代码。

06-04 16:23:30.248 I/wpa_supplicant( 1465): wlan0: Associated with d8:63:75:3e:0f:f3   //关联
06-04 16:23:30.248 D/wpa_supplicant( 1465): wlan0: WPA: Association event - clear replay counter
06-04 16:23:30.248 D/wpa_supplicant( 1465): wlan0: WPA: Clear old PTK  //清除Authorized原来的PTK，每次连接的PTK都是不一样的。
06-04 16:23:30.248 D/wpa_supplicant( 1465): TDLS: Remove peers on association
06-04 16:23:30.248 D/wpa_supplicant( 1465): EAPOL: External notification - portEnabled=0
06-04 16:23:30.248 D/wpa_supplicant( 1465): EAPOL: External notification - portValid=0
06-04 16:23:30.248 D/wpa_supplicant( 1465): EAPOL: External notification - EAP success=0
06-04 16:23:30.248 D/wpa_supplicant( 1465): EAPOL: External notification - portEnabled=1
06-04 16:23:30.248 D/wpa_supplicant( 1465): EAPOL: SUPP_PAE entering state CONNECTING
06-04 16:23:30.248 D/wpa_supplicant( 1465): EAPOL: enable timer tick
06-04 16:23:30.248 D/wpa_supplicant( 1465): EAPOL: SUPP_BE entering state IDLE
06-04 16:23:30.248 D/wpa_supplicant( 1465): wlan0: Setting authentication timeout: 10 sec 0 usec  //设置认证超时时间10s，也就是说四次握手的超时时间是10秒，如果四次握手出错，将会有10秒时间继续握手
// 这10秒内数据连接是有问题的。10s过后才会重新认证，关联
06-04 16:23:30.248 D/wpa_supplicant( 1465): wlan0: Cancelling scan request
06-04 16:23:30.248 D/wpa_supplicant( 1465): WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0
06-04 16:23:30.248 D/wpa_supplicant( 1465): WMM AC: U-APSD queues=0x0
06-04 16:23:30.248 D/wpa_supplicant( 1465): WMM AC: Valid WMM association, WMM AC is enabled
06-04 16:23:30.248 I/wpa_supplicant( 1465): wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
第一次握手，EAPOL-Key包含AP生成的Nonce(ANonce) 
06-04 16:23:30.334 D/wpa_supplicant( 1465): l2_packet_receive: src=d8:63:75:3e:0f:f3 len=99
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0: RX EAPOL from d8:63:75:3e:0f:f3   //第一次握手，收到EAPOL包
06-04 16:23:30.335 D/wpa_supplicant( 1465): RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 ee ff 60 66 b2 1c b9 0d ee dd 59 51 ab e4 3a ...
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0: Setting authentication timeout: 10 sec 0 usec
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0: IEEE 802.1X RX: version=2 type=3 length=95
06-04 16:23:30.335 D/wpa_supplicant( 1465): WPA: RX EAPOL-Key - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 ee ff 60 66 b2 1c b9 0d ee dd 59 51 ab e4 3a ...
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0:   EAPOL-Key type=2
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0:   key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0:   key_length=16 key_data_length=0
06-04 16:23:30.335 D/wpa_supplicant( 1465):   replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
06-04 16:23:30.335 D/wpa_supplicant( 1465):   key_nonce - hexdump(len=32): ee ff 60 66 b2 1c b9 0d ee dd 59 51 ab e4 3a c9 01 9b 4d fb c7 70 88 8a be c6 d6 a8 7a 82 33 9e
06-04 16:23:30.335 D/wpa_supplicant( 1465):   key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
06-04 16:23:30.335 D/wpa_supplicant( 1465):   key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
06-04 16:23:30.335 D/wpa_supplicant( 1465):   key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
06-04 16:23:30.335 D/wpa_supplicant( 1465):   key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0: State: ASSOCIATED -> 4WAY_HANDSHAKE
06-04 16:23:30.335 D/wpa_supplicant( 1465): Notifying state change event to hidl control: 7
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0: Determining shared radio frequencies (max len 2)
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0: Shared frequencies (len=1): completed iteration
06-04 16:23:30.335 D/wpa_supplicant( 1465): wlan0: freq[0]: 2422, flags=0x1
06-04 16:23:30.336 I/wpa_supplicant( 1465): wlan0: WPA: RX message 1 of 4-Way Handshake from d8:63:75:3e:0f:f3 (ver=2)   //提示四次握手的第一个包
06-04 16:23:30.336 D/wpa_supplicant( 1465): RSN: msg 1/4 key data - hexdump(len=0):
//第二次握手
Supplicant生成SNonce
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: Renewed SNonce - hexdump(len=32): c6 1c 24 87 3c d1 60 d3 b6 12 9b 82 44 d4 b6 c8 a4 f8 5b d4 5d 30 96 c7 c8 95 7e cf 0a 7f 96 58
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: PTK derivation using PRF(SHA1)
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: PTK derivation - A1=40:45:da:ff:3c:bd A2=d8:63:75:3e:0f:f3
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: Nonce1 - hexdump(len=32): c6 1c 24 87 3c d1 60 d3 b6 12 9b 82 44 d4 b6 c8 a4 f8 5b d4 5d 30 96 c7 c8 95 7e cf 0a 7f 96 58
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: Nonce2 - hexdump(len=32): ee ff 60 66 b2 1c b9 0d ee dd 59 51 ab e4 3a c9 01 9b 4d fb c7 70 88 8a be c6 d6 a8 7a 82 33 9e
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: PMK - hexdump(len=32): 98 0b 9c 55 85 14 72 db 2b 50 2a 3a 5c e1 c2 d6 e0 70 1b 34 d6 5a 23 44 be a0 2a 38 3b d2 72 43
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: PTK - hexdump(len=48): ce 5f c9 36 e4 06 8d 40 f7 4d a8 3e 2c ed 24 c6 49 39 08 08 cb 63 1d 73 96 5f 5d 33 e7 6f c6 21 ...
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: KCK - hexdump(len=16): ce 5f c9 36 e4 06 8d 40 f7 4d a8 3e 2c ed 24 c6
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: KEK - hexdump(len=16): 49 39 08 08 cb 63 1d 73 96 5f 5d 33 e7 6f c6 21
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: TK - hexdump(len=16): 44 61 6d 7d 4c ea ca 00 cc e1 cd 94 cd 1f b9 15
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
06-04 16:23:30.336 I/wpa_supplicant( 1465): wlan0: WPA: Sending EAPOL-Key 2/4
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: Send EAPOL-Key frame to d8:63:75:3e:0f:f3 ver=2 mic_len=16 key_mgmt=0x2
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: EAPOL-Key MIC using HMAC-SHA1
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: KCK - hexdump(len=16): ce 5f c9 36 e4 06 8d 40 f7 4d a8 3e 2c ed 24 c6
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: Derived Key MIC - hexdump(len=16): 78 a6 2e 51 72 57 24 02 4f ff be 15 6e a5 ec fe
06-04 16:23:30.336 D/wpa_supplicant( 1465): WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 c6 1c 24 87 3c d1 60 d3 b6 12 9b 82 44 d4 b6 ...
06-04 16:23:30.583 W/SettingsLib.AccessPoint( 1161): Received abnormal flag string: [WPA2-FT/PSK-CCMP][ESS]
06-04 16:23:30.584 D/wpa_supplicant( 1465): nl80211: Event message available
06-04 16:23:30.584 D/wpa_supplicant( 1465): nl80211: Ignored event (cmd=33) for foreign interface (ifindex 15 wdev 0x0)
06-04 16:23:30.584 D/wpa_supplicant( 1465): nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
06-04 16:23:30.584 D/wpa_supplicant( 1465): wlan0: nl80211: Scan trigger
06-04 16:23:30.585 D/wpa_supplicant( 1465): wlan0: Event SCAN_STARTED (46) received
06-04 16:23:30.585 D/wpa_supplicant( 1465): wlan0: External program started a scan
06-04 16:23:30.607 D/wpa_supplicant( 1465): l2_packet_receive: src=d8:63:75:3e:0f:f3 len=155
//第三次握手， AP派生密钥，发送supplicant
06-04 16:23:30.607 D/wpa_supplicant( 1465): wlan0: RX EAPOL from d8:63:75:3e:0f:f3  //第三次握手，收到AP发过来的EAPOL包
06-04 16:23:30.608 D/wpa_supplicant( 1465): RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 ee ff 60 66 b2 1c b9 0d ee dd 59 51 ab e4 3a ...
06-04 16:23:30.608 D/wpa_supplicant( 1465): wlan0: IEEE 802.1X RX: version=2 type=3 length=151
06-04 16:23:30.608 D/wpa_supplicant( 1465): WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 ee ff 60 66 b2 1c b9 0d ee dd 59 51 ab e4 3a ...
06-04 16:23:30.608 D/wpa_supplicant( 1465): wlan0:   EAPOL-Key type=2
06-04 16:23:30.608 D/wpa_supplicant( 1465): wlan0:   key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
06-04 16:23:30.608 D/wpa_supplicant( 1465): wlan0:   key_length=16 key_data_length=56
06-04 16:23:30.608 D/wpa_supplicant( 1465):   replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
06-04 16:23:30.608 D/wpa_supplicant( 1465):   key_nonce - hexdump(len=32): ee ff 60 66 b2 1c b9 0d ee dd 59 51 ab e4 3a c9 01 9b 4d fb c7 70 88 8a be c6 d6 a8 7a 82 33 9e
06-04 16:23:30.608 D/wpa_supplicant( 1465):   key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
06-04 16:23:30.608 D/wpa_supplicant( 1465):   key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
06-04 16:23:30.609 D/wpa_supplicant( 1465):   key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
06-04 16:23:30.609 D/wpa_supplicant( 1465):   key_mic - hexdump(len=16): e7 3d b5 52 43 5e 42 16 74 8f d3 ef ab 86 12 3f
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: EAPOL-Key MIC using HMAC-SHA1
06-04 16:23:30.609 D/wpa_supplicant( 1465): RSN: encrypted key data - hexdump(len=56): a1 33 bf 0c ef aa 16 5d 67 45 80 9e 71 37 cc a6 51 16 05 71 db 21 bc 5b 6c 2d 85 83 c0 fd d8 c1 ...
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: Decrypt Key Data using AES-UNWRAP (KEK length 16)
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: decrypted EAPOL-Key key data - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 71 21 ...
06-04 16:23:30.609 D/wpa_supplicant( 1465): wlan0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
06-04 16:23:30.609 I/wpa_supplicant( 1465): wlan0: WPA: RX message 3 of 4-Way Handshake from d8:63:75:3e:0f:f3 (ver=2)  //四次握手第三个包
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 01 00 71 21 ...
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: GTK in EAPOL-Key - hexdump(len=24): dd 16 00 0f ac 01 01 00 71 21 9e a9 cb cd 47 a4 c4 a1 23 05 3d a7 ce 34
//第四次握手
06-04 16:23:30.609 I/wpa_supplicant( 1465): wlan0: WPA: Sending EAPOL-Key 4/4 // 发送EAPOL包
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: Send EAPOL-Key frame to d8:63:75:3e:0f:f3 ver=2 mic_len=16 key_mgmt=0x2
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: EAPOL-Key MIC using HMAC-SHA1
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: KCK - hexdump(len=16): ce 5f c9 36 e4 06 8d 40 f7 4d a8 3e 2c ed 24 c6
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: Derived Key MIC - hexdump(len=16): bc 00 62 c8 8a da 44 28 b5 69 bb d9 1a 30 7b de
06-04 16:23:30.609 D/wpa_supplicant( 1465): WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
06-04 16:23:30.609 D/wpa_supplicant( 1465): wlan0: WPA: Installing PTK to the driver
06-04 16:23:30.609 D/wpa_supplicant( 1465): wpa_driver_nl80211_set_key: ifindex=15 (wlan0) alg=3 addr=0x77bb283368 key_idx=0 set_tx=1 seq_len=6 key_len=16
06-04 16:23:30.610 D/wpa_supplicant( 1465): nl80211: KEY_DATA - hexdump(len=16): 44 61 6d 7d 4c ea ca 00 cc e1 cd 94 cd 1f b9 15
06-04 16:23:30.610 D/wpa_supplicant( 1465): nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
06-04 16:23:30.610 D/wpa_supplicant( 1465):    addr=d8:63:75:3e:0f:f3
06-04 16:23:30.962 D/wpa_supplicant( 1465): EAPOL: External notification - portValid=1
06-04 16:23:30.962 D/wpa_supplicant( 1465): wlan0: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
06-04 16:23:30.962 D/wpa_supplicant( 1465): Notifying state change event to hidl control: 8
06-04 16:23:30.962 D/wpa_supplicant( 1465): wlan0: Determining shared radio frequencies (max len 2)
06-04 16:23:30.962 D/wpa_supplicant( 1465): wlan0: Shared frequencies (len=1): completed iteration
06-04 16:23:30.962 D/wpa_supplicant( 1465): wlan0: freq[0]: 2422, flags=0x1
06-04 16:23:30.964 D/wpa_supplicant( 1465): RSN: received GTK in pairwise handshake - hexdump(len=18): 01 00 71 21 9e a9 cb cd 47 a4 c4 a1 23 05 3d a7 ce 34
06-04 16:23:30.964 D/wpa_supplicant( 1465): WPA: Group Key - hexdump(len=16): 71 21 9e a9 cb cd 47 a4 c4 a1 23 05 3d a7 ce 34
06-04 16:23:30.964 D/wpa_supplicant( 1465): wlan0: WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16)
06-04 16:23:30.964 D/wpa_supplicant( 1465): WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
06-04 16:23:30.966 D/wpa_supplicant( 1465): wpa_driver_nl80211_set_key: ifindex=15 (wlan0) alg=3 addr=0x57885f22b1 key_idx=1 set_tx=0 seq_len=6 key_len=16
06-04 16:23:30.966 D/wpa_supplicant( 1465): nl80211: KEY_DATA - hexdump(len=16): 71 21 9e a9 cb cd 47 a4 c4 a1 23 05 3d a7 ce 34
06-04 16:23:30.966 D/wpa_supplicant( 1465): nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
06-04 16:23:30.966 D/wpa_supplicant( 1465):    broadcast key
06-04 16:23:31.026 I/wpa_supplicant( 1465): wlan0: WPA: Key negotiation completed with d8:63:75:3e:0f:f3 [PTK=CCMP GTK=CCMP]
06-04 16:23:31.026 D/wpa_supplicant( 1465): wlan0: Cancelling authentication timeout
06-04 16:23:31.026 D/wpa_supplicant( 1465): wlan0: State: GROUP_HANDSHAKE -> COMPLETED

关注公众号，获取更多开发必备知识
在这里插入图片描述

二十岁了还没有去过星巴克
关注
【WLAN】Wi-Fi Direct---从 Android 13 supplicant 视角分析 Go端代码
weixin_47456647的博客
03-31 532
先从Starting find入手，可以看到设置P2P模块的状态为 P2P_SEARCH。120命令，底层进入扫描状态. 扫描到的设备的个数会在这里打印出来.接着进入。接下来主要根据P2p的Go端的log来分析代码的流程.接着看下P2P模块的状态为 P2P_SEARCH后如何进行。以下代码是基于Android 13基线上分析。在讲解这边之前，建议大家先看下我写的这篇文章。状态，让自己可以被其他的设备发现.
Ralink wifi driver WPA四次握手可能的问题
junglefly的学习工作纪录
02-12 4222
测试在MT7620A上跑openwrt；router模式下，手机连接MT7620A板子就是失败。   经过分析发现： 在ralink的wifi driver中WPA成对密钥的四次握手，以及组密钥协商信令过程， 如果AP未及时收到client回复的信令，可能会主动踢掉client，或者很快重发WPA成对密钥的第一个信令； 如果使用iwpriv ra0 set Debug=3  输出更多lo
Android WiFi 日志记录(四次握手)
weixin_33814685的博客
09-12 2210
记录一下四次握手的log。 PMK： PMK（Pairwise Master Key，成对主密钥 STA和AP得到PMK后，将进行密匙派生以得到PTK。最后，PTK被设置到硬件中， 用于数据的加解密。 ·由于AP和STA都需要使用PTK，所以二者需要利用EAPOL Key帧进行信息交换。 这就是4-Way Handshake的作用。 由于STA每次关联都需要重新派生这些 Key，所以它们称为...
wpa_supplicant日志分析记录
yudelian的博客
10-27 1825
目录 1、应该是sta向热点发送deauth，通过P2P_GROUP_REMOVE p2p0 1、应该是sta向热点发送deauth，通过P2P_GROUP_REMOVE p2p0 Jan 1 00:00:10 Avatar daemon.debug wpa_supplicant[502]: CTRL-DEBUG: ctrl_sock-sendto: sock=13 sndbuf=163840 outq=0 send_len=263 Jan 1 00:00:10 Avatar daemon...
WPA_SUPPLICANT的LOG打印信息分析与调整
Zach-Zona的博客
01-18 4837
http://androidxref.com/8.0.0_r4// MSG_INFO默认打印 MSG_DEBUG 默认不打印 wpa_msg(wpa_s, MSG_INFO, "Associated with " MACSTR, MAC2STR(bssid)); wpa_dbg(wpa_s, MSG_DEBUG, "State: %s -> %s",wpa_supplicant_state_
wpa_supplicant log 输出控制
lgdlchshg的专栏
04-14 5126
在main.c中配置wpa_debug_level的级别即可。 int main(int argc, char *argv[]) { int c, i; struct wpa_interface *ifaces, *iface; int iface_count, exitcode = -1; struct wpa_params params; struct wpa_global *gl
Wpa_supplicant 调试故障原因分析
weixin_38503885的博客
10-25 6261
Wpa_supplicant 调试故障原因分析
wpa_supplicant 状态机的切换以及事件驱动
Zach-Zona的博客
09-29 7901
wpa_supplicant 状态机的切换 adb logcat | findstr "wpa_supplicant:.wlan0:.State:" 1.一次打开WIFI自动连接的过程 09-29 20:53:59.796  4882  4882 D wpa_supplicant: wlan0: State: DISCONNECTED -> DISCONNECTED 09-29 2
基于FreeRadius、Hostapd和wpa_supplicant搭建无线接入认证环境
cqwei1987的博客
07-09 1800
本文介绍FreeRadius、Hostapd和wpa_supplicant搭建无线接入认证环境；并通过抓包工具分析PEAP-MSCHAPv2的认证过程；在此基础上推导出802.1x中的相关密钥。
Wpa_supplicant 用法
sK.坤
01-08 3054
Wpa_supplicant 用法 usage:   wpa_supplicant [-BddhKLqqstuvW] [-P] [-g] \         -i -c [-C] [-D] [-p] \         [-b] [-f] \         [-N -i -c [-C] [-D] \         [-p] [-b] ...]   drivers:   wex
Android WIFI模块分析
10-31 788
一：什么是WIFI WIFI是一种无线连接技术，可用于手机、电脑、PDA等终端。WIFI技术产生的目的是改善基于IEEE802.11标准的无线网络产品之间的互通性，也就是说WIFI是基于802.11标准的，但WIFI不等同无线网络。 二：Android平台下的WIFI模块 简单介绍一下，WIFI模块的基本功能： 1. 开关WIFI 除了在WIFI设置界面可以开关WIFI，
wpa_supplicant详解
最新发布
爱她就要努力
02-13 857
在 wpa_supplicant中，有许多与外界通信的socket，它们都是需要注册到eloop event模块中的，具体地说，就是在eloop_sock_table中增加一项记录，其中包括了sock_fd, handle, eloop_data, user_data。a.因为wpa_supplicant是与网络接口对应的重要的数据结构，所以，首先分配一个wpa_supplicant数据结构的内存。g.调用wpa_supplicant_dbus_ctrl_iface_init函数初始化dbus 控制接口。
wpa_supplicant 笔记
hellolwl的专栏
04-16 1630
原文地址：http://hi.baidu.com/leran0222/item/a4b33b77923ecd44ef1e53fc 来自于wpa_supplicant-devel文档 2、代码结构 核心功能、通用辅助功能、加密功能、TLS库、配置、控制接口、WPA提供者、EAP点、EAPOL提供、窗口端口和测试程序。 wpa_supplicant的实现被分成几个独立的模块。核心代码功能包
wpa_supplicant 详解(9) - 4 way handshake
流风回雪的博客
05-31 669
wifi连接-密码正确但连接时supplicant state返回的是ERROR_AUTHENTICATING（Android M 6.0）
淡淡的宁静的博客
06-12 1806
frameworks\opt\net\wifi\service\java\com\android\server\wifi\WifiStateMachine.java frameworks\base\core\java\com\android\internal\util\StateMachine.java frameworks\base\core\java\com\android\interna...
【wpa_supplicant】 初始化
D0m1no的博客
06-10 805
wpa_supplicant 初始化
ubuntu 10.04 usb wifi 使用wpa_supplicant无法连网问题
fang437385323的专栏
02-19 1968
提示4次握手失败，在网上看到是由于ubuntu network-manager导致的，于是果断service network-manager stop，果然连上了:=) 最近在调试ralink的usb wifi，在移植到开发板上之前，想先在Ubuntu 10.04上调通；编译安装了驱动程序，编译wpa_supplicant 0.6，可是连接Ralink无线路由器老提示4此握手失败，以为是wpa_
评论 2
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值